Lexmark x9350 Manual de instrucciones
Wireless USB Wired
START HERE
If you answer “yes”
to any of these
questions, turn to the
section indicated
for Setup and
Connection
instructions.
Do you want to connect the printer to a
wireless network?
Use the Wireless Setup and Connection.
Do you want to connect the printer
directly to the computer?
Use the USB Setup and Connection.
Do you want to connect the printer to a
wired ethernet network?
Use the Wired Setup and Connection.
Wireless
Find the following wireless network
settings. See your wireless documentation,
or contact the person who set up your
wireless network.
•The name of your wireless network
(SSID)
•The type of security you use to protect
your wireless network
•The password for your wireless
network
Before you start 1You need the following items to
complete Wireless Setup:
2Temporarily move the printer
near the computer.
Wireless Setup and Connection
3Load paper.
Installation CD
Wireless Configuration Cable
Telephone cord
Print cartridges
Power cord
Wireless
1Press or to select the
language.
2Press to locate the Country
setting.
3Press or to select the
country or region.
4Press to scroll to Set Date
and Time, and then press .
4Prepare the printer.
1
2
1Use the keypad to enter the time, and
use or to scroll between hours
and minutes.
2Press or to scroll to AM, PM, or
24Hr, and use or to change
the setting.
3Press or to scroll to Current
Date.
4Use the keypad to enter the date, and
use or to scroll between day,
month, and year.
5Press to save the settings.
5Adjust the settings.
Wireless
2
1
3
6Insert the print cartridges.
1
2
1
2
The printer automatically aligns
the print cartridges and prints an
alignment page. This may take a
few minutes.
7Make sure the computer is on, and then insert the
CD.
8
Wireless
Important! If prompted,
click Cancel on any New
Hardware screens.
91Select Network
Installation.
2Click Next.
3Read and accept the
license agreement.
10
Network Installation
Click Setup Wireless.
12 Temporarily connect the Wireless
Network Configuration cable to the
printer and to your computer.
13
1
2
Select your
network, and then
click Next.
14
Click Next.
11
Wireless
16 If prompted, enter the
password or security
key(s) for your wireless
network.
20 When configuration is
complete, disconnect the
Wireless Network
Configuration cable, and
then click Next.
Note: If you do not know this information,
see the wireless network documentation or
contact the person who set up your
wireless network.
15
Note: If you do not know this information,
see the wireless network documentation or
contact the person who set up your
wireless network.
If prompted, select the
type of security you use
to protect your wireless
network, and then click
Next.
19 Choose the printer
connection, and then click
Next.
17 Verify the network
settings are correct,
and then click Next.
Next >
18 Click Next.
Wireless
If this is the only
computer on the
wireless network,
setup is
complete.
To print from other
computers on the
network, complete
steps 25–31, and
repeat until all
computers are
networked.
Make sure the next
computer is on, and then
insert the CD.
2524
To use the fax
feature, move the
printer near a
telephone wall jack,
and connect the
telephone cord to
both the printer and
the wall jack.
23 Follow the instructions
on the screen to
complete installation.
Click Next.
2221 Assign a name to the
computer, select an
optional PIN for security,
and then click Next.
Wireless
29 Assign a name to the
computer, select an
optional PIN for security,
and then click Next.
Follow the
instructions on the
screen to complete
installation.
3130 Click Next.
1Select Network
Installation.
2Click Next.
3Read and accept the
license agreement.
26 Click Next.
28
Network Installation
Click Next.
27
Wireless
S
etup trou
bl
es
h
oot
i
ng
For additional Setup troubleshooting information, see the Troubleshooting
chapter of the User’s Guide.
N
etwor
ki
ng trou
bl
es
h
oot
i
ng
For additional Networking troubleshooting information, see the
Networking chapter of the User’s Guide.
Incorrect language
appears on the display.
1Press to turn the printer off.
2Press once, and then immediately press and hold
and .
3Release the buttons.
4Press or repeatedly until the language you
want appears on the display.
5Press or repeatedly until the option for
Country is highlighted.
6Press or repeatedly until the country or region
you want appears on the display.
7Press or repeatedly until Set Date and Time
is highlighted.
8Press .
9Set the date and time. For more information, see step
5 in the Setup documentation.
Software does not
install.
1Turn off and then restart the computer.
2Click Cancel on all New Hardware screens.
3Insert the CD, and then follow the instructions on the
computer screen to install the software.
If the Install screen does not appear:
1Insert the CD.
2Click Start ÆRun.
3Type D:\Setup, where D is the letter of the CD-ROM
drive.
4Click OK.
Power button is not lit. 1Disconnect the power cord from the wall outlet and
then from the printer.
2Plug the cord all the way into the power supply on the
printer.
3Plug the cord into an electrical outlet that other
electrical devices have been using.
4If the light is not on, press .
Printer is unable to join
the network or printer is
configured correctly, but
cannot be found on the
network.
Make sure the printer settings match those used by the
wireless network.
Make sure the printer is within range of the wireless
network.
If your network uses MAC address filtering, provide the
MAC address for the printer to your network. For more
information, see the User’s Guide.
Network name does not
appear on the list of
available networks.
Select I want to enter a different configuration , and
then click Next.
If the network still does not appear:
1Select I want to enter a different configuration, and
then click Next.
2Enter the network name (SSID).
3Select the appropriate channel for the network.
4Select the mode for your network. Select
Infrastructure if you are using a wireless router.
5Click Next.
6Select the type of security you use to protect your
wireless network, and then click Next.
7If you have security, enter the password or network
key(s).
8Verify the settings are correct, and then click Next.
Network printer does not
print.
Make sure all cables to the printer and electrical outlet
are secure.
Make sure the network is operating properly.
Restart the computer.
Uninstall and then reinstall the software. For more
information, see the User’s Guide.
USB
1 2 Move the printer near the
computer.
USB Setup and Connection
3Load paper.
Installation CD
USB cable
(purchased separately)
Telephone cord
You need the following items to
complete USB Setup:
Print cartridges
Power cord
Otros manuales para x9350
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Impresora todo en uno de Lexmark
Lexmark
Lexmark Prospect Pro205 Manual de usuario
Lexmark
Lexmark 7100 series Manual de usuario
Lexmark
Lexmark CX510 series Manual de usuario
Lexmark
Lexmark 7100 series Manual de usuario
Lexmark
Lexmark Xs463de - Mono Laser Mfp P/C/S 40Ppm 1200X Manual de usuario
Lexmark
Lexmark X750e Manual de usuario
Lexmark
Lexmark 644e - X MFP B/W Laser Manual de usuario
Lexmark
Lexmark X860de Manual de usuario
Lexmark
Lexmark C544N/DN/DW/DTN Manual de usuario
Lexmark
Lexmark X746 Guía de instalación
Lexmark
Lexmark MX710 Series Manual de usuario
Lexmark
Lexmark X548 Family Manual de usuario
Lexmark
Lexmark X203N series Manual de usuario
Lexmark
Lexmark Prestige Pro805 Manual de usuario
Lexmark
Lexmark CX310 series Manual de usuario
Lexmark
Lexmark 734de - X Color Laser Manual de usuario
Lexmark
Lexmark CX410 series Manual de usuario
Lexmark
Lexmark X548 Family Manual de usuario
Lexmark
Lexmark 16A0867 - OptraImage 725 Manual de instrucciones
Lexmark
Lexmark 560n - X Color Laser Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
