Lexmark MX810 Series Manual de usuario

E-mail Guide

You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.

Sending an e-mail using the printer control panel

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)

into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.

3From the home screen, navigate to:

E-mail > Recipient(s)

4Type the e‑mail address, or press #using the keypad, and then enter the shortcut number.

Notes:

•To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.

•You can also enter an e‑mail address using the address book.

5Touch Done > Send It.

Sending an e‑mail using a shortcut number

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)

into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3Press #, then enter the shortcut number using the keypad, and then touch .

Note: To enter additional recipients, touch Next address, and then enter the address or shortcut number that you want

to add.

4Touch Send It.

Sending an e‑mail using the address book

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)

into the ADF tray. Place these items on the scanner glass.

E-mail Guide

Page 1 of 4

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the home screen, navigate to:

E-mail > Recipient(s) > > type the name of the recipient > Search

4Touch the name of the recipient.

Note: To enter additional recipients, touch Next address, and then enter the address or shortcut number that you want

to add, or search the address book.

5Touch Done.

Understanding the e-mail options

Recipient(s)

This option lets you enter the recipient of your e-mail. You may enter multiple e‑mail addresses.

Subject

This option lets you type a subject line for your e-mail.

Message

This option lets you type a message that will be sent with your scanned attachment.

File Name

This option lets you customize the attachment file name.

Save As Shortcut

This option lets you save the current settings as a shortcut by assigning a number.

Original Size

This option lets you set the paper size of the documents you are going to e‑mail. When Original Size is set to Mixed Sizes, you

can scan an original document that contains mixed paper sizes (letter‑and legal‑size pages).

Darkness

This option lets you adjust how light or dark your scanned documents are in relation to the original document.

Resolution

This option lets you adjust the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and

the time needed to scan your original document. Decreasing the image resolution reduces the file size.

E-mail Guide

Page 2 of 4

Send As

This option lets you set the output type for the scan image.

Select one of the following:

•PDF—Use this to create a single file with multiple pages.

Note: PDF is the factory default setting.

•Secure PDF—Use this to create an encrypted PDF file that protects the file contents from unauthorized access.

•TIFF—Use this to create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded

Web Server, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.

•JPEG—Use this to create and attach a separate file for each page of your original document.

•XPS—Use this to create a single XPS file with multiple pages.

Content

This option lets you set the original document type and source.

Select from the following content types:

•Graphics—The original document is mostly business‑type graphics, such as pie charts, bar charts, and animations.

•Photo—The original document is mostly a photo or an image.

•Text—The content of the original document is mostly text or line art.

•Text/Photo—The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

•Black/White Laser—The original document was printed using a mono laser printer.

•Color Laser—The original document was printed using a color laser printer.

•Inkjet—The original document was printed using an inkjet printer.

•Magazine—The original document is from a magazine.

•Newspaper—The original document is from a newspaper.

•Other—The original document was printed using an alternate or unknown printer.

•Photo/Film—The original document is a photo from film.

•Press—The original document was printed using a printing press.

Scan Preview

This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning

is paused and a preview image appears.

Note: This option appears only when a working printer hard disk is installed.

Page Setup

This option lets you change the following settings:

•Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper. This also

identifies what needs to be scanned for inclusion in the e-mail.

•Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings

to match the orientation.

•Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.

E-mail Guide

Page 3 of 4

Using the advanced options

Select from the following settings:

•Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror

Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e‑mail the

document.

•Custom Job—This combines multiple scanning jobs into a single job.

•Edge Erase—This removes smudges or marks around the edges of a document. You can choose to remove an equal area

around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected, leaving

nothing on that portion of the scan.

•Transmission Log—This prints the transmission log or transmission error log.

•Multifeed Sensor—This detects when the ADF picks more than one sheet of paper at a time, and then displays an error

message.

Note: This option is supported only in select printer models.

E-mail Guide

Page 4 of 4

Otros manuales para MX810 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Lexmark

Lexmark

Lexmark Clinical Assistant X646dte Manual de usuario

Lexmark

Lexmark 16A0867 - OptraImage 725 Manual de instrucciones

Lexmark

Lexmark OptraImage 232 Manual de usuario

Lexmark

Lexmark 5200 Series Manual

Lexmark

Lexmark MX-B427W Manual de usuario

Lexmark

Lexmark 8300 Series Manual

Lexmark

Lexmark 9350 - X Wireless Office Color Inkjet Manual de usuario

Lexmark

Lexmark MB790MFP Manual de usuario

Lexmark

Lexmark X9575 Manual de usuario

Lexmark

Lexmark 576 Manual de usuario

Lexmark

Lexmark 18M0410 Manual de usuario

Lexmark

Lexmark 544n - X Color Laser Manual de usuario

Lexmark

Lexmark X651 MFP Manual de servicio

Lexmark

Lexmark CS748de Manual de usuario

Lexmark

Lexmark X 2600 Manual de usuario

Lexmark

Lexmark MX810 Series Manual de usuario

Lexmark

Lexmark MX6500E Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Lexmark

Lexmark Pro915 Manual de usuario

Lexmark

Lexmark X651DE Manual de usuario

Lexmark

Lexmark 6500E Manual de usuario

Lexmark

Lexmark Pro4000 Series Manual de usuario

Lexmark

Lexmark 560n - X Color Laser Manual de usuario

Lexmark

Lexmark 6300 Series Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Brother

Brother MFC-9760 Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario

Copystar

Copystar CS 4551ci Manual de usuario

Konica Minolta

Konica Minolta Magicolor 4650EN Manual de usuario

Brother

Brother MFC-9840CDW Manual de usuario