Levoit Classic 300S Manual de usuario

Levoit Core™ 300S

Smart True HEPA Air Puriﬁer

Model:LAP-C301S-WAUR

USER MANUAL

Questions or Concerns?

Please contact us at [email protected].

Table of Contents

Package Contents

Speciﬁcations

Safety Information

Getting to Know Smart Your Air Puriﬁer

Controls

Getting Started

Using Your Smart Puriﬁer

About the Filter

Levoit Replacement Filters

Care & Maintenance

Troubleshooting

Warranty Information

Customer Support

Package Contents

1 x Smart Air Puriﬁer

1 x True HEPA 3-Stage Original Filter

(Pre-Installed)

1 x User Manual

1 x Quick Start Guide

Speciﬁcations

Power Supply AC 220–240V, 50/60Hz

Rated Power 23 W

Ideal Room

Size

50 m²

Note:

•

rooms, but puriﬁcation

will take longer.

• Ideal Room Size is

based on 2 air changes

per hour (ACH).

CADR 240 m³/h

Operating

Conditions

Temperature:

-10°–40°C / 14°–104°F

Humidity: < 85% RH

Noise Level 22–50 dB

Dimensions 22 x 22 x 36 cm /

8.7 x 8.7 x 14.2 in

Weight 2.7 kg / 5.95 lb

Wi-Fi®

Frequency

Range

2412–2472MHz

E.I.R.P: <20dBm

Bluetooth®

Frequency

Range

2402–2480MHz

E.I.R.P: <20dBm

Note: To access additional smart functions,

download the free VeSync app (see page 8).

SAFETY INFORMATION

• Only use your air puriﬁer as

described in this manual.

• Do not use without removing the

plastic wrap from the ﬁlter. The air

puriﬁer will not ﬁlter air, and may

overheat, causing a ﬁre hazard.

• Do not use the air puriﬁer outdoors.

• Keep the air puriﬁer away from

water, and wet or damp areas.

Never place in water or liquid.

• Do not use in excessively humid

areas.

• Keep the air puriﬁer away from heat

sources.

• Do not use where combustible

gases, vapors, metallic dust,

aerosol (spray) products, or fumes

from industrial oil are present.

• Keep 1.5 m / 5 ft away from where

oxygen is being administered.

• Supervise children when they are

near the air puriﬁer.

• Do not place anything into any

opening in the air puriﬁer.

• Do not sit or place heavy objects

on the air puriﬁer.

• Keep the inside of the air puriﬁer

dry. To prevent moisture buildup,

avoid placing in rooms with

major temperature changes or

underneath air conditioners.

• Always unplug the air puriﬁer

before servicing (such as changing

the ﬁlter).

• Do not use the air puriﬁer if it is

damaged or not working correctly,

To reduce the risk of ﬁre, electric shock, or other injury, follow all instructions and

safety guidelines.

General Safety

READ AND SAVE THESE

INSTRUCTIONS

or if the cord or plug is damaged.

Do not try to repair it yourself.

Contact Customer Support (see

page 19).

• WARNING: To reduce the risk of

ﬁre or electric shock, do not use

this air puriﬁer with any solid-state

speed controls (such as a dimmer

switch).

•

Not for commercial use. Household

use only.

This appliance is not intended for

used by persons (including children)

with reduced physical, sensory or

mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision or

instruction concerning use of the

appliance by a person responsible

for their safety.

Children should be supervised to

ensure that they do not play with the

appliance.

Cleaning and user maintenance shall

not be made by children without

supervision.

•

• Keep the air puriﬁer near the outlet

it is plugged into.

• Never place the cord near any heat

source.

• Do not cover the cord with a rug,

carpet, or other covering. Do not

place the cord under furniture or

appliances.

• Keep the cord out of areas where

people walk often. Place the cord

where it will not be tripped over.

Your Levoit air puriﬁer complies with all

standards regarding electromagnetic

ﬁelds (EMF). If handled properly and

according to the instructions in this

user manual, the appliance is safe

to use based on scientiﬁc evidence

available today.

Power &CordElectromagnetic Fields (EMF)

If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualiﬁed

persons in order to avoid a hazard.

The attachment plug of the appliance

and receptacle serve as the manual

means for disconnecting remote

operation commands,external

communication or data signals shall

specify that unplugging the appliance

disconnects the remote functions.

•

GETTING TO KNOW YOUR SMART AIR PURIFIER

A. Fan Speed Indicators

B. Fan Speed Button

D. Sleep Mode Button

E. Timer Button

F. Timer Indicator

G. Wi-Fi® Indicator

H. Auto Mode Button

I. Air Quality Indicator Rings

Front, upsidedownBack

K. Check Filter Indicator

L. Display Lock Button

M. Air Outlets

N. Housing

O. Air Inlets

P. AirSight Plus™ Laser Dust Sensor

Q. Anti-Skid Pads

R. Filter Cover

S. True HEPA 3-Stage Original Filter

N P

C O NTROLS

Button

•

• Press and hold to conﬁgure

the air puriﬁer. See the

VeSync in-app instructions

for more information.

• Press and hold to reset the

air puriﬁer and disconnect

from Wi-Fi (see page 8)

Fan Speed Button

• Cycles through fan speeds:

I (low), II (medium), and III

(high).

• Tapping the Fan Speed

Button while the air puriﬁer

is in Sleep Mode or Auto

Mode will exit that mode.

Wi-Fi Indicator

•

indicate pairing status.

See the VeSync in-app

instructions for more

information.

Sleep Mode Button

• Turns Sleep Mode on

(see page 9).

• Press and hold for 3

seconds to reset the Check

Filter Indicator.

Timer Button

• Cycles through timer

options (see page 10).

• Holding for 2 seconds

allows you to cycle through

the timer options faster.

Display Lock Button

• Prevents current settings

from being changed

(see page 10).

• Blinks when any other

button is tapped to indicate

that Display Lock is on.

Auto Mode

• Turns Auto Mode on

(see page 9).

Check Filter Indicator

• Lights up when the ﬁlter

should be checked

(see Check Filter Indicator,

page 14).

• Reset the Check Filter

Indicator by pressing and

holding the Sleep Mode

button for 3 seconds.

•

page 10).

• Tap any button (except )

to turn the display back on.

3. Replace the ﬁlter cover and twist

clockwise to lock. [Figure 1.3]

Figure 1.3

Figure 1.4

38 cm /

15 in

cover should

snap shut

38 cm /

15 in

G E TTING S TA R T E D

1. Flip the air puriﬁer over. Twist the ﬁlter

cover anticlockwise and remove it.

[Figure 1.1]

Figure 1.1

Figure 1.2

handle facing up

2. Remove the ﬁlter from its plastic

packaging and place the ﬁlter back into

the air puriﬁer with the handle facing up.

[Figure 1.2]

4. Place the puriﬁer on a ﬂat, stable surface

with the display facing up. Allow at least

38 cm / 15 inches of clearance on all

sides. Keep away from anything that

would block airﬂow, such as curtains.

[Figure 1.4]

USING YOUR SMAR T

AIR PURIFIER

1. Plug in and tap to turn on the air

puriﬁer. The fan will start on level I.

2. Optionally, tap to change fan speed

between I, II, and III.

Note:

• The indicators are not buttons and

cannot be used to change the fan

speed.

• The fan speed indicators will light up

when active.

• Fan speed III is the loudest, but cleans

air the quickest.

• For best results, or to address a speciﬁc

air quality issue such as smoke, run the

air puriﬁer at high speed (level III) for

15–20 minutes before using a lower

speed.

•

and doors closed while the air puriﬁer

is on.

3. Tap

Note: Using the VeSync app allows you to control

your air puriﬁer remotely and access additional

functions and features.

1. To download the VeSync app, scan the

QR code or search “VeSync” in the Apple

App Store® or Google Play Store.

2. Open the VeSync app. Log In or Sign Up.

3. Follow the in-app instructions to set up

your smart air puriﬁer.

You can use the VeSync app to connect

your smart air puriﬁer to Amazon Alexa or

Google Assistant™. Please follow in-app

instructions to set up your voice assistant.

Note:

• To disconnect Wi-Fi, press and hold the

air puriﬁer’s default settings and disconnect

it from the VeSync app.

• To reconnect, please follow the instructions

in the VeSync app for adding a device.

VeSync App Setup

Connect with Amazon Alexa or

Google Assistant™

Sleep Mode operates quietly by using a fan

speed lower than fan speed 1.

1. Tap

after 3 seconds if no other buttons are

pressed.

Auto Mode uses AirSight Plus™, a smart

laser dust sensor inside the air puriﬁer, to

adjust the fan speed automatically based on

air quality. For example, if the air quality is

bad, the fan will automatically be set to high

speed.

The air puriﬁer is in Standby Mode when it is

Note: Display lock can be used while the

air puriﬁer is in Standby Mode to keep the

air puriﬁer from turning back on. The laser

dust sensor will still detect the surrounding

air quality and give you updates in the

VeSync app.

Note:

•

any button (except ) to turn the

display back on. If you don’t press

again after 3 seconds.

• The Check Filter Indicator will still turn

on and stay on if it’s time to check your

ﬁlter (see page 14).

Note:

• The air puriﬁer will take 5 seconds

to detect the air quality each time it

is turned on. During this time, the air

quality indicator rings will be blue. After

5 seconds, the air quality indicator

rings will change color based on the

detected air quality.

• The VeSync app also supports

additional auto modes: Quiet Auto

(see page 10).

Air Quality Indicator Chart

Indicator

Color

Air

Quality

Auto Mode

Fan Speed

Blue Very Good Sleep Mode

Green Good Low

Orange Moderate Medium

Red Bad High

When the air puriﬁer is plugged in and turned

Sleep Mode, Auto Mode, Display Lock, and

When the air puriﬁer is unplugged and turned

speed, Sleep Mode, and Auto Mode.

Note: The air puriﬁer will remember the last

timer setting chosen (1–12 hours), but it will not

automatically resume the timer. You will need to

reselect the timer after the air puriﬁer is turned

back on.

Memory Function Auto Mode

Standby Mode

Sleep Mode

You can set a timer for 1–12 hours.

1. Tap repeatedly to select a time in

1-hour increments. When you’ve chosen

your time, the display will ﬂash 3 times,

and the timer will start automatically.

When the air puriﬁer is on, you can lock

the display to prevent settings from being

accidentally changed. Buttons will not

respond to being tapped.

1. Tap and hold for 3 seconds to

lock/unlock the display.

2. will light up, and will ﬂash 3 times.

puriﬁer, including button lights and indicator

lights (except the Check Filter Indicator).

1. Press

2. Tap any button (except or ) to

temporarily turn the display back on.

If you don’t press another button, the

3. Press to turn the display back on.

The display will stay on.

Note:

• You can change the fan speed at any

time while the timer is on.

• The timer will restart if the time is

changed.

• The air puriﬁer will remember the last

timer will be cancelled and need to be

restarted.

• You can set a timer for 1–24 hours in

the VeSync app.

Note: The Check Filter Indicator will still turn

on and stay on if it’s time to check your ﬁlter

(see page 14).

2. When the timer is ﬁnished, the air puriﬁer

3. To cancel a timer, tap until the display

reads “--H” and ﬂashes 3 times.

Note:

• The timer indicator will count down

from your selected time, and the air

• Press and hold for 2 seconds to

cycle through timer options faster.

• The timer indicator cannot be used to

select a time.

• The indicator will light up when active.

Note:

• When the display is locked, will

ﬂash 3 times if you tap other buttons on

the display.

• Display lock can still be used when the

air puriﬁer is in Standby Mode.

TimerDisplay O

Display Lock

Otros manuales para Classic 300S

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Purificador de aire de Levoit

Levoit

Levoit Core 200S Manual de usuario

Levoit

Levoit Tower Pro True Manual de usuario

Levoit

Levoit EverestAir LAP-EL551S-AUS Manual de usuario

Levoit

Levoit LV-PUR131S Manual de usuario

Levoit

Levoit LV-H126 Manual de usuario

Levoit

Levoit Core 300 Manual de usuario

Levoit

Levoit LV-H132 Manual de usuario

Levoit

Levoit LV-H133 Manual de usuario

Levoit

Levoit True HEPA Core 300-RAC Manual de usuario

Levoit

Levoit Core 400S Series Manual de usuario

Levoit

Levoit Pet Care True HEPA Core P350 Manual de usuario

Levoit

Levoit LV-H128 Manual de usuario

Levoit

Levoit Core 300 Manual de usuario

Levoit

Levoit HERA LAP-C302S-WUSB Manual de usuario

Levoit

Levoit LV-H128 Manual de usuario

Levoit

Levoit Core 300 Manual de usuario

Levoit

Levoit Pet Care True HEPA Core P350 Manual de usuario

Levoit

Levoit Core 400S Series Manual de usuario

Levoit

Levoit LV-H135-RWH Manual de usuario

Levoit

Levoit Vista 200 Manual de usuario

Levoit

Levoit LV-H133 Manual de usuario

Levoit

Levoit LV-PUR131 Manual de usuario

Levoit

Levoit Vista 200 Manual de usuario

Levoit

Levoit Vital 100 Manual de usuario

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Philips

Philips AC2721 Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Winix

Winix NK300 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario