LevelOne WBR-3601 Manual de usuario
LevelOne
User Manual
Ver. 1.0
WBR-3601
54Mbps Wireless ADSL2+ Modem Router
Table of Contents
Product Overview.............................................................................................................................3
Product Description..........................................................................................................................3
Specification.....................................................................................................................................4
LED Meaning...................................................................................................................................6
Back Panel Connectors ...................................................................................................................7
Factory Default Settings...................................................................................................................8
Hardware Requirements..................................................................................................................8
Setting up the Hardware Environment.............................................................................................8
Installation & Setup..........................................................................................................................9
Configuration Procedures ..............................................................................................................12
WBR-3601 Router Configuration ...................................................................................................16
Technology Glossary......................................................................................................................23
Introduction of the Web Configuration............................................................................................27
Accessing WBR-3601 Router Web Configuration..........................................................................27
Quick Start Guide....................................................................................................................29
Interface Setup .......................................................................................................................33
Advanced Setup .....................................................................................................................38
Access Management ..............................................................................................................44
Maintenance...........................................................................................................................48
Status......................................................................................................................................51
Universal Plug-and-Play (UPnP)....................................................................................................53
Troubleshooting .............................................................................................................................55
3
Product Overview
This section provides an overview of the WBR-3601 Router. It also describes the general
applications available with the WBR-3601 Router.
Product Description
WBR-3601 Router is a low cost, high performance and high-speed device that provides a full rate
ADSL2+ Router with the superb reliability and a complete solution for home and office router.
WBR-3601 Router can have a maximum downstream data rate of up to 24Mbps and an upstream
of up to 1Mbps. When configured as a DHCP server, it will assign IP address to every connected
PC and acts as the only externally recognized Internet device on your local area network. With
build-in NAT, WBR-3601 Router serves as an Internet firewall, protecting your network from being
accessed by outside users. You can safely enjoy the new generation broadband Internet with
WBR-3601 Router.
Note! This section documents general product features
available in the WBR-3601 Router product series. Please refer
to the release notes for a current list of upgraded hardware
and software specifications.
4
Specification
ADSL Standards supported
●Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite),
G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for AnnexA, B
●G.lite (G.992.2) with line rate support of up to 1.5Mbps downstream and 512Kbps upstream.
●Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1(for
ISDN only); G.991.1;G.lite (G992.2)).
●Supports OAM F4/F5 loop-back, AIS and RDI OAM cells.
●ATM Forum UNI 3.1/4.0 PVC.
●Supports up to 8 PVCs (UBR, CBR, VBR).
●Multiple Protocols over AAL5 (RFC 1483).
●PPP over AAL5 (RFC 2364).
●PPP over Ethernet (RFC 2516).
Wireless Ethernet 802.11g
With built-in 802.11g access point for extending the communication media to WLAN
while providing the WEP and WPA/WPA2 for securing your wireless networks.
Network Address Translation (NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol address used
within one network (for example a private IP address used in a local network) to a different IP
address known within another network (for example a public IP address used on the Internet).
Universal Plug and Play (UPnP)
Using the standard TCP/IP protocol, the WBR-3601 Router and other UPnP enabled devices can
dynamically join a network, obtain an IP address and convey its capabilities to other devices on the
network.
10/100M Auto-negotiation Ethernet / Fast Ethernet Interface
This auto-negotiation feature allows the WBR-3601 Router to detect the speed of incoming
transmissions and adjust appropriately without manual intervention. It allows data transfer of either
10 Mbps or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet
network.
Dynamic DNS Support
With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address,
Multiple PVC (Permanent Virtual Circuits) Support
Your WBR-3601 Router supports up to 8 PVC’s.
5
DHCP Support
DHCP (Dynamic Host Configuration Protocol) allows individual clients (computers) to obtain
TCP/IP configuration at start-up from a centralized DHCP server. The WBR-3601 Router has
built-in DHCP server capability enabled by default. It can assign IP addresses, an IP default
gateway and DNS servers to DHCP clients. The WBR-3601 Router can now also act as a
surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real
DHCP server to the clients.
6
LED Meaning
Your WBR-3601 Router has indicator lights on the front side. Please see below for an explanation
of the function of each indicator light.
Power indicator
ADSL Link indicator
Internet Active indicator
Wireless Active indicator
Ethernet Active indicator
Table 1. LED function
Label
Color
On
Flash
Off
Green
Ready
Not Ready
Power Off
Green
Connect to
DSLAM
Disconnect to DSLAM
N/A
Green
Connect to
Internet /IDLE
Transmit / Receive Data
Disconnect to
Internet
Green
N/A
Wireless Activated
Deactivated
Green
Ethernet
Connected
Transmit / Receive Data
Ethernet
Disconnected
7
Back Panel Connectors
Table 2 shows the function of each connector and switch of the WLANADSL2+
Router’s back panel. Figure 1 illustrated the connectors.
Table 2. Function / Description of Connectors
Connector
Description
RESET
Reset button, RESET the WBR-3601 Router to its default settings
SWITCH
Power Switch
POWER
Connects to your WBR-3601 Router 12V power adaptor
LAN1~4
RJ-45 Jack (Ethernet Cable) connection to your PC, or HUB
LINE
Connects to your ADSL2+ line –for ADSL2+ Line input
Figure1. Rear View of the WBR-3601 Router
8
Factory Default Settings
Before configuration, please refer to following default settings,
Web interface:
Username: admin
Password: password
LAN IP Settings:
IPAddress: 192.168.0.1
Subnet Mask: 255.255.255.0
DHCP:
DHCP Server: Enable
Hardware Requirements
To use WBR-3601 Router, please have following hardware / accessories ready.
A PC with Pre-installed Ethernet Adapter (Required)
12V power adaptor (Included in the package)
RJ-45 Ethernet cable (Included in the package)
RJ-11cable (Included in the package)
Setting up the Hardware Environment
Please kindly refer to chapter 4.0 “Installation & Setup”
Note! Be sure that you are well insulated from any power
source to avoid electricity shock.
9
Installation & Setup
Follow each STEP carefully and only go to the next step once you have complete the previous
STEP.
1. Connect the ADSL activated Telephone line
2. Connect the Computer LAN cable to an available LAN port.
10
3. Plug in the Power Adapter
4. Press the Power ON switch on the rear of the router.
Otros manuales para WBR-3601
3
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de LevelOne
LevelOne
LevelOne WBR-3407 Manual de usuario
LevelOne
LevelOne WBR-6601 Manual de usuario
LevelOne
LevelOne WBR-3600 Manual de usuario
LevelOne
LevelOne WBR-3601 Manual de usuario
LevelOne
LevelOne FBR-1411TX Manual de usuario
LevelOne
LevelOne WBR-6002 Manual de usuario
LevelOne
LevelOne WBR-6802 Manual de usuario
LevelOne
LevelOne WGR-6013 Manual de usuario
LevelOne
LevelOne WGR-6012 Manual de usuario
LevelOne
LevelOne WBR-6803 Manual de usuario
LevelOne
LevelOne FBR-2000 Manual de usuario
LevelOne
LevelOne WBR-3407 11g Manual de usuario
LevelOne
LevelOne WBR-3601 Manual de usuario
LevelOne
LevelOne FBR-1800TX Manual de usuario
LevelOne
LevelOne WBR-3460 Manual de usuario
LevelOne
LevelOne WBR-6800 Manual de usuario
LevelOne
LevelOne WBR-6803 Manual de usuario
LevelOne
LevelOne WBR-6001 Manual de usuario
LevelOne
LevelOne WBR-6804 Manual de usuario
LevelOne
LevelOne WBR-3400TX Manual de usuario
