LevelOne FPS-1031 Manual de usuario

LevelOne

FPS-1031 Print Server w/ 1 Parallel Port

FPS-1032 Print Server w/ 1 USB Port

Quick Installation Guide

English Português

Deuts h Svenska

Français Slovenščina

Español 繁體中文

Dut h 한국어

Dansk Русский

Italiano 

Ελληνικά

• This guide covers only the most

common situations. Please refer to the

full User Manual on the CD-ROM

English

Before you start, you should prepare the following items:

 One Windows-based PC with print server setup CD

 One printer

 One printer able

 One HUB

 Wired etwork with Print Server:

Printer Print Server

Computer Computer Computer

HUB

 Hardware Installation:

1. Turn off the printer’s power.

2. Conne t the print server to your printer with the

supplied printer able.

3. Turn the printer’s power on.

4. Plug the AC power adapter into the power

onne tor on the print server.

5. Wait 10 se onds as part of the print server’s Power

On Self Test (POST).

 Software Installation:

1. To enable network ommuni ation with print server,

your omputer must have a proper IP address, e.g.

192.168.0.100

2. Insert the setup CD into your CD-ROM and the

following message appears.

3. Choose FPS-1031 or FPS-1032.

4. Choose Setup Wizard to install the print server and

onfigure the onne ted printer.

5. Cli k ext, the wizard will automati ally dis over

the print server.

6. From the Select a Print Server s reen, sele t the

print server that you want to onfigure and li k

ext.

7. On the Change Settings s reen, sele t o or Yes:

Cli k o if you want the print server to keep using the

default IP address and keep the default settings, and

then li k ext.

 IP address: 192.168.0.10

 Subnet Mask: 255.255.255.0

Cli k Yes if you want to hange IP address to the print

server, and then li k ext.

8. On the Select A Printer s reen, sele t an already

onfigured printer from the list, li k ext and then

Finish to omplete the installation.

Sele t Add ew Printer if the print server is

onne ted to a printer that hasn’t been installed

before and does not appear in the list.

ote:

1. The IP address of print server must be within the

same subnet as your network adapter.

2. After you save the new IP address, the print server

will automati reboot on e to make ready for the

9. Cli k Add ew Printer to laun h Windows Add

Printer Wizard.

10. Cli k ext and sele t Local Printer, make sure the

Automatically detect and install my Plug and

Play printer he k box is OT he ked. Then li k

ext.

11. Make sure the Use the following port radio-button

is li ked and sele t LPT1: (Recommended

Printer Port) from the pull-down list. Then li k

ext.

12. Sele t Manufacturer and Printer from the lists of

printer’s driver. Then li k ext.

13. If you already have the printer’s driver installed, you

will be asked whether to keep it or to repla e it.

Cli k ext. Supply a name for the printer and

hoose whether you want to make it your default

printer. Then li k ext.

14. Then, hoose whether you want to share the printer

with other network users, print a test page (please

sele t o.), et . Sele t the appropriate radio-button

and li k ext and Finish.

15. In the setup wizard, finish the installation by

highlighting the installed printer in the Select a

Printer list and li k ext -> Finish.

16. From Windows system, go to start -> Printers and

Faxes and highlight your newly installed printer.

17. Right- li k, sele t Properties -> Ports and verify

that the print server’s port appears.

18. Go to General; li k Print Test Page to verify the

onfiguration.

19. Done.

ote:

If you wish to install more print servers, start setup wizard

from your Windows Start menu: start -> All Programs ->

etwork Print Server -> PSWzard and repeat the

installation pro edure.

All ontents are subje t to hange without prior noti e.

Technical Support

Thank you for sele ting LevelOne produ ts. LeveOne’s

website ontains the latest user do umentation and

software updates for LevelOne produ ts.

Please onta t LevelOne Te hni al Support through our

website.

World Wide Web

http://www.level1. om

Deutsch

Bevor Sie beginnen, sollten Sie die folgenden Dinge

vorbereiten:

 Windows-basierter PC mit Einri htungs-CD für den

Dru kerserver

 Dru ker

 Dru kerkabel

 Hub

 Wired etwork with Print Server:

 Hardwareinstallation:

1. Trennen Sie den Dru ker von der Stromversorgung.

2. S hließen Sie den Dru kerserver über das

mitgelieferte Dru kerkabel an Ihren Dru ker an.

3. Trennen Sie den Dru ker von der Stromversorgung.

4. Verbinden Sie das Netzteil mit dem

Netzteilans hluss des Dru kerservers.

5. Warten Sie 10 Sekunden, bis der Dru kerserver-

Selbsttest abges hlossen ist.

 Softwareinstallation:

Computer

1. Um über das Netzwerk mit dem Dru kerserver

kommunizieren zu können, müssen Sie Ihrem

Computer eine geeignete IP-Adresse zuweisen - z.

B. 192.168.0.100.

2. Legen Sie die Einri htungs-CD in Ihr CD-ROM-

Laufwerk ein; die folgende Meldung wird angezeigt.

3. Wählen Sie FPS-1031 oder FPS-1032.

4. Zur Installation des Dru kerservers und zur

Konfiguration des anges hlossenen Dru kers

wählen Sie Setup Wizard (Einrichtungsassistent).

5. Kli ken Sie auf ext (Weiter); der Dru kerserver

wird automatis h vom Assistenten erkannt.

6. Im Bilds hirm Select A Print Server (Wählen Sie

einen Druckerserver) wählen Sie den zu

konfigurierenden Dru kerserver und kli ken

ans hließend auf ext (Weiter).

7. Im Bilds hirm Change Settings (Einstellungen

ändern) wählen Sie o ( ein) oder Yes (Ja):

Otros manuales para FPS-1031

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Servidor de impresión de LevelOne

LevelOne

LevelOne FPS-9021 Manual de usuario

LevelOne

LevelOne FUS-3101 Manual de usuario

LevelOne

LevelOne FPS-1032 Manual de usuario

LevelOne

LevelOne EPS-3001TU Manual de usuario

LevelOne

LevelOne FPS-9021 Manual de usuario

LevelOne

LevelOne EPS-3001TU Manual de usuario

LevelOne

LevelOne TROY 200 Manual de usuario

LevelOne

LevelOne FPS-1033 Manual de usuario

LevelOne

LevelOne WPS-0104 Manual de usuario

LevelOne

LevelOne WPS-9123 Manual de usuario

LevelOne

LevelOne FPS-9023 Manual de usuario

LevelOne

LevelOne FPS-1031 Manual de usuario

LevelOne

LevelOne FPS-1031 Manual de usuario

LevelOne

LevelOne FPS-2111TXU Manual de usuario

LevelOne

LevelOne WPS-0100 Manual de usuario

LevelOne

LevelOne WPS-9121 Manual de usuario

LevelOne

LevelOne WPS-1133 Manual de usuario

LevelOne

LevelOne WPS-1133 Manual de usuario

LevelOne

LevelOne FPS-2112 Manual de usuario

LevelOne

LevelOne FPS-1033 Manual de usuario

Manuales populares de Servidor de impresión de otras marcas

Digitus

Digitus DN-13003-1 Manual de usuario

Edimax

Edimax PS-1206PWg Manual de usuario

Intellinet

Intellinet 509077 Manual de usuario

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Zonet

Zonet ZPS1000 Manual de usuario

TRENDnet

TRENDnet TEW-P11G Manual de usuario

Axis

Axis 140 BJC Manual de usuario

HP Jetdirect 280m - 802.11b Wireless Print... Manual de usuario

MicroNet

MicroNet SP766W Manual de usuario

NETGEAR

NETGEAR PS104 - Hub - EN Manual de usuario

Axis

Axis AXIS 1610 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Axis

Axis 5600+ Manual de usuario

NETGEAR

NETGEAR PS105 Manual de usuario

Xerox

Xerox FreeFlow Print Server V9 SP3 Manual de usuario

SEH

SEH primos Manual de usuario

D-Link

D-Link DP-101P+ Manual de usuario