Let's Go Aero Fork-IT H01793 Instrucciones de instalación

Page 1 of 6

Fork-IT™

Bicycle Fork Mount Kit for

GearCage®Brand Cargo Carriers

Part No. H01793

FI Manual-073117

ASSEMBLY AND OPERATION

PARTS LIST

Qty Description

Rear Wheel Stop

U-Bolts

Steel Nuts & Washers

Fork Mount Assembly

Step 1:

Preparation:

The Fork Mount Assembly [D] has the option to be mounted to either the Top or Side of the GearCage railing.

[See Figures 1 & 2 for Top Mount illustration; See Figures 3 & 4 for Side Mount illustration].

Install the Fork Mount to the GearCage railing in the desired position using four (4) Steel Nuts and Washers

[C] and two (2) U-Bolts [B] as shown. Do not fully secure connections at this time, hand-tighten only until

nal bike t is complete.

Using the Fork-IT Bicycle mount system (sold

individually; one kit per bike), multiple bikes can be

transported on the GearCage Cargo Carrier (or other

rooftop & hitch carriers with 1 inch railings or Yakima/

Thule compatible bars) with numerous mounting

options for placement.

See the Bicycle Position Overview on Pages 4 and 5 before beginning assembly to plan for bicycle position

before installation of Fork-IT system. Final placement will depend on number of bicycles to be transported,

intended interior cargo and user preference.

*For Skewer Mount Only (Not Thru Axle)

Top Rail Mount Side Rail Mount

[Figure 1] [Figure 2] [Figure 3] [Figure 4]

Page 2 of 6

Install the Rear Wheel Stop using two (2)

Steel Nuts and Washers [C] and one (1)

U-Bolt [B] as shown with the Rear Stop [A]

resting on top of the GearCage rails and

the U-Bolt [B] secured from underneath as

shown. (Review the bicycle position overview

on Pages 4-5 to conrm placement [Figure 5

& 6]. Hand -tighten only at this time.

NOTE: The Rear Stop’s “peg” can be

installed and pointed in any of the 6 available

directions, interior, exterior, left & right, top &

bottom.

NOTE: Like the Fork Mount assembly, the

Rear Wheel Stop can also be “Side Mounted.”

See Figures 3 & 4 on Page 1 for a “Side

Mount” example.

With both the Fork Mount assembly and the Rear Wheel Stop attached, conrm bicycle t and nal placement.

Fully tighten the hardware and secure the Fork Mount assembly and the Rear Wheel Stop to the carrier railing.

NOTE: The Fork-IT system is for

skewer mount application only

(not for thru axle).

Prepare your bicycle for mounting

by removing the bicycle’s front tire

exposing the “Drop-Outs” (refer to

your Bicycles Manual for proper

tire removal).

Loosen the Tension Nut located

on the Skewer and conrm

the Quick Release Arm is in

the “Open” position [Figure 7].

Lower your bicycles fork onto the

skewer and secure your bicycle

by tightening the Tension Nut and

moving the Quick Release Arm to

the “Closed” position [Figure 8].

Step 2:

Step 3:

Operation:

BICYCLE FORK

DROP-OUTS

BICYCLE FORK

TENSION

NUT

SKEWER

PEG

[Figure 5]

[Figure 7]

[Figure 6]

[Figure 8]

CLOSED POSITION

QUICK RELEASE

OPEN POSITION

QUICK RELEASE

Page 3 of 6

With the bicycle rear tire

resting against the Rear

Wheel Stop’s “Peg”,

stretch the Adjustable

Rubber Strap with

the Hammerhead end

through the tire and

reconnect to a hole

position that is one hole

tighter than unstreched

[Figure 9 & 10].

NOTE: The Adjustable

Strap should be taut

with absolutely no slack.

Operation:

To avoid loss/damage to products/bicycle as well as personal injury, always conrm the

Fork Mount Assembly, Rear Wheel Stop and Bicycle are fully secured before transit.

Do not use this product for purposes other than those for which they were designed.

Failure to follow the guidelines of the product’s instructions will void the warranty.

Never allow the total width of the Fork-IT mount appartus and bicycles to exceed past the

width of the tow vehicles mirrors.

Keep equipment away from vehicle’s hot exhaust ow by at least 6 inches.

WARNING

PEG

ADJUSTABLE

STRAP

ADJUSTABLE

STRAP

Page 4 of 6

Bicycle Position Overview:

Two Bikes: Across

Four Bikes: Front & Rear

Two Bikes: Inline

Four Bikes: Inline

It is highly recommended to plan your bicycle placement before installing the Fork-IT mount assembly.

Below are some examples of Fork-IT Mount and bicycle placement on the GearCage carrier.

NOTE: Example placement has been organized for maximized cargo space; actual placement may vary

depending on the number of bicycles, cargo, and sizes of the bicycles to be transported.

*Must have LED Light Kit for conﬁguration

Page 5 of 6

Bicycle Position Overview: GearCage FP-6

Bicycle Position Overview: Roof Rack & Non-GearCage Carrier

6 Bikes: Inline Four Bikes: Across

Including the bicycles positions available on Page 4 the GearCage FP-6 has more available congurations for

multiple bicycle transport. Below are some expanded examples of Fork-IT Mount and Bicycle placement that

are possible on the GearCage FP-6 only.

NOTE: For clearance purposes, never allow the carrier, bicycles and fork mount apparatus to exceed the width

of the tow vehicles mirrors.

The Fork-IT system

shares compatibility with

any roof rack, basket, or

hitch carrier that employs

1 inch railings or Yakima/

Thule compatible cross

bars.

Follow Steps 1-3 on

Pages 1-2 for proper

Fork-IT attachment using

your choosen mounting

surface appartus in place

of the GearCage Carrier.

*Must have LED Light Kit for conﬁguration

Page 6 of 6

ONE YEAR LIMITED WARRANTY

Let’s Go Aero warrants this product to be free from defect in material and workmanship for one year (retain your sales receipt for your

records). Any product or part thereof found to be defective within that period will be replaced without charge provided that: (1) the prod-

uct was not misused; (2) no alterations or modications were made; (3) its failure was not a result of normal wear expected in the use of

the product; (4) the product or part is delivered, freight prepaid, to Let’s Go Aero. Manufacturers only obligation shall be to replace such

products or parts proved to be defective. A Return Merchandise Authorization is required prior to return. Please contact Let’s Go Aero

toll-free, at 877-464-2376 or 719-630-3800, or via email to [email protected] to get an RMA number. This warranty terminates

if a purchaser transfers the product to any other person. No warranty is given for LGA products purchased outside of the United States

and Canada.

To register your product, visit the Let’s Go Aero website at www.LetsGoAero.com

For assistance with this bicycle carrier accessory, please contact Let’s Go Aero:

4474 Barnes Rd, Colorado Springs, CO 80917

Phone: 877-464-2376 or 719-630-3800

Email: [email protected]

To learn more about our line of bicycle carriers for vehicle, home storage, and accessory options for carrying fat bikes, snowboards/

skis, and more, be sure to visit our website: www.LetsGoAero.com

U.S. Patent No: D717716; D717717; D684917; 8,889,456; D722289; Patents Pending

Warranty Information

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Let's Go Aero

Let's Go Aero

Let's Go Aero B01809 Manual de usuario

Let's Go Aero

Let's Go Aero GearSpace HGK819 Manual de usuario

Let's Go Aero

Let's Go Aero PegBoard B01588 Instrucciones de instalación

Let's Go Aero

Let's Go Aero V2 Two-Bike Carrier Manual de usuario

Let's Go Aero

Let's Go Aero BikeWing-2 Manual de usuario

Let's Go Aero

Let's Go Aero VME-V4 Manual de usuario

Let's Go Aero

Let's Go Aero BlackBox PRO Instrucciones de instalación

Let's Go Aero

Let's Go Aero LittleGiant Guía de referencia rápida

Let's Go Aero

Let's Go Aero Full Nelson Manual de usuario

Let's Go Aero

Let's Go Aero HideOut Package H01564 Manual de usuario

Let's Go Aero

Let's Go Aero Half Nelson Manual de usuario

Let's Go Aero

Let's Go Aero HexCap Manual de usuario

Let's Go Aero

Let's Go Aero BLACK BOX Manual de usuario

Let's Go Aero

Let's Go Aero BLACK BOX Manual de usuario

Let's Go Aero

Let's Go Aero GearSpace Manual de usuario

Let's Go Aero

Let's Go Aero GearSpace HGK819 Manual de usuario

Let's Go Aero

Let's Go Aero H01465 Manual de usuario

Let's Go Aero

Let's Go Aero Three-Quarter Nelson Manual de usuario

Let's Go Aero

Let's Go Aero GearDeck 17 Instrucciones de instalación

Let's Go Aero

Let's Go Aero T01991 Manual de usuario

Let's Go Aero

Let's Go Aero Half Nelson Manual de usuario

Let's Go Aero

Let's Go Aero Seal Skin Tonneau Cover Instrucciones de instalación

Let's Go Aero

Let's Go Aero HideOut Package H01564 Manual de usuario

Let's Go Aero

Let's Go Aero TireBiter V-Rack Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario