Lenze IE2 m550-H Guía
Three-phase AC motors
IE2 three-phase AC motor m550-H Version B
IE3 three-phase AC motor m550-P Version B
Mounng and switch-on instrucons EN
Contents
About this document 5
Document descripon 5
Further documents 5
Notaons and convenons 6
Safety instrucons 7
Basic safety instrucons 8
Applicaon as directed 9
Foreseeable misuse 9
Residual hazards 10
Product informaon 12
Idencaon of the products 12
Nameplates 12
Product codes 13
Features 15
Storage 16
Mechanical installaon 17
Important notes 17
Transport 17
Preparaon 17
Installaon 18
Dimensions 18
Mounng 19
Product extensions 20
Electrical installaon 22
Important notes 22
Preparaon 22
Motor connecon 23
Connecon via terminal box 24
Connecon via ICN connector 28
Connecon via HAN connector 31
Connecon via M12 connector 32
Commissioning 33
Important notes 33
Before inial switch-on 34
Funconal test 34
Maintenance 35
Maintenance intervals 35
Maintenance work 36
Repair 39
Diagnoscs and fault eliminaon 40
Malfuncons 40
Contents
3
About this document
WARNING!
Read this documentaon carefully before starng any work.
▶Please observe the safety instrucons!
Document descripon
This document is intended for skilled personnel who work with the products described.
The data and informaon compiled in this document serve to support you in the electrical and
mechanical installaon and commissioning.
•The document is only valid together with the complete documentaon of the product!
•For safety-rated aachments observe the enclosed operang instrucons of the
manufacturer!
•The document includes safety instrucons which must be observed.
•All persons working on and with the drives must have the documentaon at hand during
work and observe the informaon and notes relevant for it.
•The documentaon must always be complete and in a perfectly readable state.
Further documents
Informaon and tools with regard to the Lenze products can be found on the
Internet: www.Lenze.com à Downloads
About this document
Document descripon
5
Notaons and convenons
Convenons are used in this document to disnguish between dierent types of informaon.
Numeric notaon
Decimal separator Point Generally shown as a decimal point.
Example: 1 234.56
Warnings
UL Warnings UL Are used in English and French.
UR warnings UR
Text
Engineering Tools " " Soware
Example: "Engineer", "EASY Starter"
Icons
Page reference ¶Reference to another page with addional informaon.
Example: ¶ 16 = see page 16
Documentaon reference ,Reference to other documentaon with addional informaon.
Example: , EDKxxx = see documentaon EDKxxx
Layout of the safety instrucons
DANGER!
Indicates an extremely hazardous situaon. Failure to comply with this instrucon will result
in severe irreparable injury and even death.
WARNING!
Indicates an extremely hazardous situaon. Failure to comply with this instrucon may result
in severe irreparable injury and even death.
CAUTION!
Indicates a hazardous situaon. Failure to comply with this instrucon may result in slight to
medium injury.
NOTICE
Indicates a material hazard. Failure to comply with this instrucon may result in material
damage.
About this document
Notaons and convenons
6
Safety instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe
personal injury and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the
precondion for safe and trouble-free operaon and for obtaining the product features
specied.
Please observe the specic safety informaon in the other secons!
Safety instrucons
7
Basic safety instrucons
DANGER!
Dangerous electrical voltage
Possible consequences: Death or severe injuries from electric shock
▶Any work on the device must only be carried out in a deenergized state.
▶Aer switching o the mains voltage, observe the signs on the product.
Product
•The product must only be used as directed.
•Never commission the product in the event of visible damage.
•The product must never be technically modied.
•Never commission the product before assembly has been completed.
•The product must never be operated without required covers.
•Connect/disconnect all pluggable terminals only in de-energized condion.
•Only remove the product from the installaon in the deenergized state.
Personnel
Only qualied and skilled personnel are allowed to work with the product. IEC 60364 and/or
CENELEC HD 384 dene the qualicaons of these persons as follows:
•They are familiar with the installaon, mounng, commissioning, and operaon of the
product.
•They possess the appropriate qualicaons for their tasks.
•They are familiar with all regulaons for the prevenon of accidents, direcves, and laws
applicable at the locaon and are able to apply them.
Electrical connecon
When working on energized products, comply with the applicable naonal accident
prevenon regulaons.
The electrical installaon work must be carried out according to the appropriate regulaons
(e.g. cable cross-secons, fusing, PE conductor connecon). Addional informaon can be
obtained from the documentaon.
The documentaon contains notes about installaon according to EMC regulaons. Also
observe these notes for CE-marked products. The manufacturer of the system or machine is
responsible for adherence to the limits required in connecon with EMC legislaon.
Operaon
Where appropriate, you must equip the system with addional monitoring and protecve
devices. Comply with the safety regulaons and other regulaons applicable at the place of
operaon.
Aer disconnecng the product from the supply voltage, do not touch live device parts and
power terminals immediately because capacitors may be charged. Observe the corresponding
informaon labels on the product.
Dirt or dust deposits impede the heat dissipaon and cooling. Remove any such deposits
where appropriate at regular intervals.
Process engineering
The procedural notes and circuit details described are only proposals. It is up to the user to
check whether they can be adapted to the parcular applicaons. Lenze does not take any
responsibility for the suitability of the procedures and circuit proposals described.
Safety instrucons
Basic safety instrucons
8
Applicaon as directed
•The harmonized standards of the series IEC/EN60034 are used.
•The product must only be actuated under the operang condions and power limits
specied in this documentaon.
•The product meets the protecon requirements of 2014/35/EU: Low-Voltage Direcve.
•The product is not classed as a machine under 2006/42/EU: Machinery Direcve.
•No machine is to be commissioned or put into operaon as intended in conjuncon with
the product unl it has been determined that the machine meets the regulaons of EC
Direcve 2006/42/EU: Machinery Direcve; observe EN 60204−1.
•Commissioning or pung into operaon as intended is only permied in compliance with
the EMC Direcve 2014/30/EU.
•The product is not a household appliance. Instead, it is a component that is intended
exclusively for further use in the context of commercial or professional use as dened by
EN 61000−3−2.
•The product can be used according to the technical data if the drive systems have to
comply with categories in accordance with EN 61800−3.
•Do not use the built-in brakes as fail-safe brakes. Disrupve factors that cannot be
inuenced may cause the braking torque to be reduced.
•The product may be operated with or without an inverter.
Foreseeable misuse
•Use in potenally explosive areas
•Use in agressive environments
•Use under water
•Use under radiaon
•Use in generator mode
Safety instrucons
Applicaon as directed
9
Residual hazards
Even if notes given are taken into consideraon and protecve measures are implemented,
the occurrence of residual risks cannot be fully prevented.
The user must take the residual hazards menoned into consideraon in the risk assessment
for his/her machine/system.
If the above is disregarded, this can lead to severe injuries to persons and damage to
property!
Product
Observe the warning labels on the product!
Dangerous electrical voltage:
Before working on the product, make sure there is no voltage applied to the power terminals!
Aer mains disconnecon, the power terminals will sll carry the hazardous electrical voltage for the me given next to the
symbol!
High leakage current:
Carry out xed installaon and PE connecon in compliance with:
EN 61800−5−1 / EN 60204−1
Hot surface:
Use personal protecve equipment or wait unl the device has cooled down!
Protecon of persons
•The product does not provide any safety-related funcons.
-A higher-level safety system must be implemented.
-Provide addional monitoring and protecve equipment complying with the safety
regulaons applicable in each case.
•The power terminals may carry voltage in the switched-o state or when the motor is
stopped.
-Before working, check whether all power terminals are deenergized.
•Voltages may occur on the drive components (e.g. capacive, caused by inverter supply).
-Careful earthing must be carried out at the marked posions of the components.
•There is a risk of burns from hot surfaces!
-Provide protecon against accidental contact.
-Use personal protecve equipment or wait unl the device has cooled down!
-Prevent contact with ammable substances.
•Risk of injury from rotang parts.
-Before working on the drive system, ensure that the motor is at a standsll.
•There is a danger of unintenonal start-up or electric shocks!
•Installed brakes are no fail-safe brakes.
- torque may be reduced by disrupve factors that cannot be inuenced such as
ingressing oil.
Safety instrucons
Residual hazards
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Motor de Lenze
Lenze
Lenze g500-H45 Manual técnico
Lenze
Lenze m850 Manual técnico
Lenze
Lenze g500-B / m850 Guía
Lenze
Lenze g500-B Guía
Lenze
Lenze M Series Manual de usuario
Lenze
Lenze g500-S Manual de usuario
Lenze
Lenze Smart Motor m300 Guía
Lenze
Lenze L-force GST Manual de usuario
Lenze
Lenze g500-B Manual técnico
Lenze
Lenze M Series Manual de usuario
Lenze
Lenze m850 Guía
Lenze
Lenze IE3 g500-H Manual técnico
Lenze
Lenze MCS 09 Guía
Lenze
Lenze IE2 g500-S Guía
Lenze
Lenze IE2 g500-H Guía
Lenze
Lenze MQA Series Manual técnico
Lenze
Lenze g500-S Manual técnico
Lenze
Lenze g500 Series Manual de usuario
Lenze
Lenze MD KS Series Manual de usuario
Lenze
Lenze MQA Series Guía
