Lelit Pro Line MARA X PL62X Manual de servicio

Extended guide

PL62X

MaraX

Pro Line

EXTRA

content

MARA X

PRO Line - MaraX - PL62X

THANK YOU FOR CHOOSING

A LELIT PRO LINE PRODUCT

To get the most of your coffee machine PL62X

visit our Lelit Espresso YouTube channel for

insights, tutorials, tips and tricks.

Save the box and all

the packaging material!

LELIT has studied the external and internal pack-

aging of your coffee machine to help you re-use it

in case of maintenance or repair need.

Index

1. Main specications 4

2. Product overview 6

3. Factory settings 6

4. Equipment box 7

5. Packing 8

6. First start-up 8

7. How to install the water resin lter 9

8. Espresso and coffee 10

9. Steam and hot water 11

10. Stand-by mode 12

11. Functioning modes 13

12. The art of espresso coffee 15

13. Limestone prevention 18

14. Daily cleaning 19

15. Weekly cleaning 19

16. Annual cleaning 21

17. Pilot lights and states 21

18. Most common problems 22

19. Warranty terms 25

PRO Line - MaraX - PL62X

1. Main specications

User Friendly

This machine allows anyone

to make an espresso as good

as it tastes at a café by using

an E61 group.

Stainless steel

For maximum hygiene in the

kitchen and easy cleaning of

the appliance. A simple wipe

with a sponge and your ma-

chine will shine again.

Stainless steel boiler

The new stainless-steel boiler

AISI316L is a detail aimed at

improving the nal result: an

espresso that keeps its taste

and aroma intact through

each single bean from the

start to the very end.

Coffee Slide

A dispensing spout that can

be used for both one or two

cups and that allows the user

to see the coffee cream on

its way towards the cup.

Energy saving

When the machine is not

used for a long time, it au-

tomatically enters the power

saving mode. This saves

money for you and valuable

resources for the planet.

ATTENTION:

Read the safety notes carefully before using this

product.

1 11 17

in the equipment

box

Pic 2

PRO Line - MaraX - PL62X

2. Product overview

3. Factory settings

1. Mobile water tank cover

2. Heated surface for cup grate

3. Steam dispensing knob

4. Pilot light machine ready

5. Pilot light water tank full of water

6. Manometer for steam and pump

pressure during extraction

7. Multi-directional, anti-burn steam

wand

8. ON/OFF main switch (with lighted

frame)

9. Temperature mode switch

10. Water tank (2,6L)

11. Grate for heated surface

12. Hot water dispensing knob

13. Brewing group

14. Coffee group lever

15. Multi-directional, anti-burn hot

water wand

16. Use mode switch

17. Removable water drainage tray,

complete with grate

Use mode (16)

Coffee Mode (pre-set value)

Temperature mode (9)

Warm (pre-set value)

Stand by:

Resin lter:

Not inserted

MaraX has 2 functioning modes: Coffee Mode that gives priority to Coffee and

Steam Mode that gives priority to Steam. You can choose the right use mode

for your habits and always get the best possible performance: press the switch

(16) to change the functioning mode.

Both modes can run on specic temperature or pressure range: press the switch

(9) to change the range.

Read more about other functioning proles on Chapter 11.

4. Equipment box

A. 1 dose (9-11g) coffee lter

B. 2 doses PLUS (18-21g) coffee lter

C. Blind lter for backushing

D. Tamper in stainless steel with red

wood handle (PLA481R)

E. Raiser for espresso cups

F. First cleaning kit (with 3 detergent

powder single-dose bags and 1 sin-

gle-dose bottle)

G. Filterholder complete with 2 doses

(14-18g) coffee lter

H. LELIT 35L water resin lter

I. Brush for group head cleaning

J. Plastic spoon for coffee powder

K. Power cord

PRO Line - MaraX - PL62X

5. Packing

The packaging of your coffee machine has been studied and produced to be re-

used. Save the box and all the packaging material for the entire warranty period

and, if possible, even after.

Use the original box and all the packaging elements in case you need to send

the machine back to your reseller or to an authorized service centre, for ordinary

or extraordinary maintenance.

On our Lelit Espresso YouTube channel you will nd a video on how to pack the

machine properly, using the original box and packaging material.

Please also consult your LELIT reseller before shipping the machine away and

follow his eventual specic instructions.

6. First start-up

6.1 6.2 6.3

FRONT

sec

Attention. Remove the machine from its packing and follow the instructions printed

on the box.

Place the machine on a solid, at and dry surface and make sure the appliance is

stable; if needed, screw/unscrew the feet to adjust the position of the machine.

From the equipment box, take out the water drainage tray (17), the grate (11),

the mobile cover (1) and position them as indicated in Pic. 2.

Attention. Do not install the water lter, please run the rst start-up and proceed

with the water lter installation only aerwards.

Fill the water tank (10) with room temperature water up to the indicated maxi-

mum level and insert it in its seating (Pic 6.1).

Use the power cord (K) to connect the machine to the electrical mains and turn

ON the machine by pressing the ON/OFF (8) switch. If the water tank (10) is full

of water and properly inserted in its seating, the pilot light (5) goes ON (Pic 6.2).

The hydraulic circuit will need maximum 4 minutes from the 1st turn on to get

lled with water. Once the waiting time is over, the pilot light (4) will start ash-

ing. Lift the group lever (14) completely. The brewing group (13) will start dis-

pensing water (within 30 seconds). Let the water come out for about 30 seconds

and then return the group lever to its initial position (Pic 6.3).

Now the hydraulic circuit is lled up. The machine will start heating the water to

reach the pre-set values. This operation requires maximum 24 minutes: the pilot

light (5) remains rmly on, while the pilot light (4) ashes.

The machine is ready for use when the 2 pilot lights (4, 5) and the lighted frame

of the ON/OFF (8) switch are rmly on.

Attention. During the heating phase, a small quantity of water will drain in the

tray (17). is is normal and conrms the machine correct functioning (functions check).

Attention. MaraX has all the drains into the drip tray, including the one coming

from the overpressure valve. Check the drip tray, empty, and rinse it periodically!

7. How to install the water resin lter

7.1 7.2 7.3

min

Before installing the resin lter (H) in the water tank (10), immerse the resin lter

in a jug full of water for about 3 minutes, to eliminate the air inside the lter that

may cause a machine malfunction (Pic 7.1).

PRO Line - MaraX - PL62X

Take out the water tank (10) and remove the black rubber support placed on

the bottom of the tank. Insert the resin lter (H) in the bigger hole of the rubber

support, remove the charge tube from the small plastic lter and x it on the

nozzle of the resin lter (H) (Pic 7.2).

Re-place the support in its seating on the bottom of the tank (Pic 7.3), ll the

tank (10) with water and insert the tank (10) in its seating.

Note. e Lelit water lters are composed of sodium-based cationic resins. ese

lters placed inside the tank lter the water and capture the calcium and magnesium salts

which would normally precipitate and form scale deposits in the espresso machine circuit.

Once captured, these salts liberate sodium salts: a water rich in sodium is good for the

health and enhances the avour of the coee blend chosen for the coee brewing.

The Lelit water lters have a tested autonomy for 35 lt (PLA930S) and 70 lt

(PLA930M): once reached this quantity of water and anyway within 4 months

from the installation, the lter must be changed, because the cationic resin

inside is worn out.

8. Espresso and coffee

8.1 8.2 8.3

1OK

Choose your coffee lter, insert it into the portalter (G) and ll it with the ade-

quate quantity of ground coffee. Use the tamper (D) to press the coffee powder

in the portalter (G). Fix the portalter (G) into the brewing group (13) and make

sure the handle is aligned with padlock symbol present on the group (Pic 8.1).

Place the cup/s under the portalter and lift the group lever (14) to start the

coffee extraction (Pic 8.2).

Tabla de contenidos

Otros manuales de Cafetera de Lelit

Lelit

Lelit PL60T Manual de usuario

Lelit

Lelit PL2SVX-EU Manual de usuario

Lelit

Lelit PL60PLUST Manual de usuario

Lelit

Lelit PL60R1 Manual de usuario

Lelit

Lelit Pro Line - Mara PL62S Manual de usuario

Lelit

Lelit Kate PL82T Manual de usuario

Lelit

Lelit PL 046 Manual de usuario

Lelit

Lelit PL042EM Manual de usuario

Lelit

Lelit PRO Line MaraX PL62X Manual de usuario

Lelit

Lelit PL042EMI Manual de usuario

Lelit

Lelit PL41TEM Manual de usuario

Lelit

Lelit PL60T Manual de usuario

Lelit

Lelit PL41TEM/110 Manual de usuario

Lelit

Lelit PL41LEM Manual de usuario

Lelit

Lelit Grace PL81T Manual de usuario

Lelit

Lelit PL41QE Manual de usuario

Lelit

Lelit PL042E Manual de usuario

Lelit

Lelit PL61 Manual de usuario

Lelit

Lelit Kate PL82T Manual de usuario

Lelit

Lelit Pro Line MaraX Manual de usuario

Lelit

Lelit PL042TEMD Manual de usuario

Lelit

Lelit PRO Line MaraX PL62X Manual de usuario

Lelit

Lelit PL60 Manual de usuario

Lelit

Lelit Pro Line - Mara PL62S Manual de usuario

Manuales populares de Cafetera de otras marcas

Taurus

Taurus Livorno 6 Manual de usuario

Delta-q

Delta-q QUICK Manual de usuario

Bunn

Bunn LCA-1 Guía de solución de problemas

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Instrucciones de instalación

Saeco

Saeco Vienna Plus Sup 018M Manual de usuario

DeLonghi

DeLonghi DC300 Manual de usuario

INCAPTO

INCAPTO BXCO1470E Manual de usuario

Bosch

Bosch TASSIMO finesse TAS16B Series Manual de usuario

Exido

Exido 245-072 Manual de usuario

Animo

Animo OptiVend Choco Manual de usuario

Siemens

Siemens TQ505DF Series Manual de usuario

DeLonghi

DeLonghi ECI341 Manual de usuario

Krups

Krups KT406511 Manual de usuario

Cimbali

Cimbali M32 Classic Manual de usuario

Philips

Philips HL3844N Manual de usuario

Bosch

Bosch TES 515 SERIES Manual de usuario

Tekmatix

Tekmatix TMFM - 65 Manual de usuario

Scarlett

Scarlett SC-CM33005 Manual de usuario