Leica DMS1000 Manual de usuario
Leica DMS1000
User Manual
Leica DMS1000 User Manual 2
Contents
General Notes
General Notes 5
Important Safety Notes 6
Symbols Used 7
Safety Instructions 8
Introduction
Congratulations! 11
Standard Delivery and Optional Accessories 12
System Overview 13
Overview of the Instrument 14
Effective Displayed Section 15
Assembly
LeicaDMS1000 with Incident Light Base 17
Incident Light Base and Focusing Column 17
Microscope Carrier and LeicaDMS1000 18
LeicaDMS1000 with Transmitted Light Base 19
Transmitted Light Base and Focusing Column 19
Microscope Carrier and LeicaDMS1000 20
LeicaDMS1000 with Swing-arm Stand 21
Baseplate and Vertical Column 21
Safety Ring and Horizontal Arm 22
Microscope Carrier and LeicaDMS1000 23
Objective and Illumination 24
Standard Objective 24
Objective with Telecentric Optics 25
Illumination: Leica LED3000 RL 27
Illumination: Leica LED3000 NVI 29
Illumination: Leica LED5000SLI, Leica LED3000SLI 30
Installation
HD Mode (Standalone) 33
Cables and Terminals, Activating HD Mode (Standalone) 33
PC Mode 34
Connecting a Computer, Installing Software, Activating PC Mode 34
Limitations in PC Mode 35
Startup Procedure
LeicaDMS1000 37
Switching on the LeicaDMS1000 37
Switching on the Illumination 38
Focusing, Adjusting the Resistance of the Focus Drive 39
Changing Magnification, Click-stop Feature 40
Remote Control 41
Pairing Cameras With Remotes 43
Configuring the Front Button or Footswitch 44
Leica DMS1000 User Manual 3
Contents (Continued)
Operation
Operation in HD Mode (Standalone) 47
Checking Cables and Terminals 47
Switching on the LeicaDMS1000 48
Information about SD Memory Cards 49
Capturing Images without a Computer 50
Displaying Images and Videos without a Computer 51
White Balance 52
PC Mode 53
Checking Cables, Terminals and Software 53
Switching on the LeicaDMS1000 54
Additional Use of an HD Monitor in PC Mode 55
User Menu
Calling up the User Menu 57
Automatic White Balance 58
Manual White Balance 59
Exposure 60
Resolution 61
Camera Settings 63
User-defined Settings 65
Setting the Overlay (SETUP OVERLAY) 67
Scalable Display 69
Configuring Predefined Illumination Scenarios 70
Service
Care, Maintenance, Contact Persons 72
Spare Parts 75
Specifications
Technical Data 77
Optical Data – Field of View 81
Optical Data – Magnification and Depth of Field 82
Dimensional Drawings 84
LeicaDMS1000 84
LeicaDMS1000 with Incident Light Base 85
LeicaDMS1000 with Incident Light Base 86
LeicaDMS1000 with Transmitted Light Base 87
LeicaDMS1000 with Swing-arm Stand 88
Leica DMS1000 User Manual General Notes 4
General Notes
Leica DMS1000 User Manual General Notes 5
General Notes
Safety concept
Before using your Leica microscope for the first
time, please read the "Safety Concept" booklet
included with your instrument. It contains addi-
tional information on handling and care.
Use in clean rooms
The LeicaDMS1000 digital microscope system
can be used in clean rooms without any
problems.
Cleaning
ODo not use any unsuitable cleaning agents,
chemicals or techniques for cleaning.
ONever use chemicals to clean colored
surfaces or accessories with rubberized
parts. This could damage the surfaces,
and specimens could be contaminated by
abraded particles.
OIn most cases, we can provide special solu-
tions on request. Some products can be
modified, and we can offer other accesso-
ries for use in clean rooms.
Servicing
ORepairs may only be carried out by Leica
Microsystems-trained service technicians.
Only original Leica Microsystems spare
parts may be used.
Responsibilities of person in charge of
instrument
OEnsure that the Leica microscope is oper-
ated, maintained and repaired by autho-
rized and trained personnel only.
Leica DMS1000 User Manual General Notes 6
Important Safety Notes
User Manual
The Leica DMS1000 can be configured in a
variety of ways in the Leica product range.
You can find information on individual system
components on the interactive CD-ROM
together with all relevant user manuals in addi-
tional languages. Keep this CD-ROM in a safe
place, where it is available to the user. User
manuals and updates are also available for
you to download and print from our website
www.leica-microsystems.com.
This operating manual describes the special
functions of the Leica DMS1000 digital micro-
scope system and contains important instruc-
tions for its operational safety, maintenance,
and accessories.
The "Safety Concept" booklet contains addi-
tional safety information regarding the service
work, requirements and the handling of the
microscope, accessories and electrical accesso-
ries as well as general safety instructions.
You can combine individual system articles with
articles from external suppliers (e.g. cold light
sources, etc.). Please read the User Manual and
the safety instructions from the supplier.
Before installing, operating or using the instru-
ments, read the user manuals listed above. In
particular, please follow all safety instructions.
To maintain the unit in its original condition and
to ensure safe operation, the user must follow
the instructions and warnings contained in
these user manuals.
Leica DMS1000 User Manual General Notes 7
Symbols Used
Warning! Safety hazard!
•This symbol indicates especially impor-
tant information that is mandatory to
read and observe.
Failure to comply can cause the following:
OHazards to personnel
OFunctional disturbances or damaged
instruments
Warning of hazardous electrical voltage
This symbol indicates information that
must be read and observed.
Failure to comply can cause the following:
OHazards to personnel
OFunctional disturbances or damaged
instruments
Danger due to hot surface
This symbol warns against touching hot
surfaces, e.g. those of light bulbs.
Important information
This symbol indicates additional informa-
tion or explanations that are intended to
provide clarity.
Leica DMS1000 User Manual General Notes 8
Safety Instructions
Description
OThe individual modules fulfill the highest
requirements for observation and docu-
mentation with the LeicaDMS1000 digital
microscope system.
Intended Use
ORefer to "Safety Concept" booklet
Non-intended use
ORefer to "Safety Concept" booklet
Never use the LeicaDMS1000 or its components
for surgical procedures (such as eye surgery)
since it is not intended for such use.
The instruments and accessories described in
this User Manual have been tested for safety and
potential hazards. The responsible Leica affiliate
must be consulted whenever the instrument is
altered, modified or used in conjunction with
non-Leica components that are outside of the
scope of this manual!
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Place of use
ORefer to "Safety Concept" booklet
OElectrical components must be placed at
least 10 cm away from the wall and from
flammable substances.
OAvoid large temperature fluctuations, direct
sunlight and vibrations. These conditions
can distort measurements and micro-
graphic images.
OIn warm and warm-damp climatic zones,
the individual components require special
care in order to prevent the build-up of
fungus.
Responsibilities of person in charge of
instrument
ORefer to "Safety Concept" booklet
Ensure that:
OThe Leica DMS1000 digital microscope
system and accessories are operated, main-
tained and repaired by authorized and
trained personnel only.
OAll operators have read, understood and
observe this User Manual, and particularly
the safety regulations.
Leica DMS1000 User Manual General Notes 9
Safety Instructions (Continued)
Repairs, service work
ORefer to "Safety Concept" booklet
OOnly original Leica Microsystems spare
parts may be used.
OBefore opening the instruments, switch off
the power and unplug the power cable.
OAvoid contact with powered electrical
circuits, which can lead to injury.
Transport
OUse the original packaging for shipping or
transporting the individual modules of the
Leica DMS1000 digital microscope system
and the accessory components.
OIn order to prevent damage from vibrations,
disassemble all moving parts that (accord-
ing to the user manual) can be assembled
and disassembled by the customer and
pack them separately.
Integration in third-party products
ORefer to "Safety Concept" booklet
Disposal
ORefer to "Safety Concept" booklet
Legal regulations
ORefer to "Safety Concept" booklet
EC Declaration of Conformity
ORefer to "Safety Concept" booklet
Health risks
Workplaces with microscopes facilitate and
improve the viewing task, but they also impose
high demands on the eyes and holding muscles
of the user. Depending on the duration of unin-
terrupted work, asthenopia and musculoskel-
etal problems may occur. For this reason, appro-
priate measures for reduction of the workload
must be taken:
OOptimal arrangement of workplace, work
assignments and work flow (changing tasks
frequently).
OThorough training of the personnel, giving
consideration to ergonomic and organiza-
tional aspects.
The ergonomic optics concept and the design
of the LeicaDMS1000 digital microscope system
aim to limit the strain on the user to the lowest
possible level.
Leica DMS1000 User Manual Introduction 10
Introduction
Tabla de contenidos
Otros manuales de Microscopio de Leica
Leica
Leica SP5C Manual de usuario
Leica
Leica TCS SP2 Guía de referencia
Leica
Leica MC170 HD Manual de usuario
Leica
Leica M60 B Manual de usuario
Leica
Leica DM IRM Manual de usuario
Leica
Leica Stellaris 8 FALCON Guía de instalación
Leica
Leica TCS SP5 X Manual de usuario
Leica
Leica DM LM Guía de referencia
Leica
Leica WILD M690 Manual de usuario
Leica
Leica DM LSP Manual de usuario
Leica
Leica CME Manual de usuario
Leica
Leica DMIL Manual de usuario
Leica
Leica ARveo Manual de usuario
Leica
Leica DMi1 Manual de usuario
Leica
Leica Sp5 WLL STED Instrucciones de operación
Leica
Leica DMi8 Manual de usuario
Leica
Leica TCS SP8 Manual de usuario
Leica
Leica TCS SPE Manual de usuario
Leica
Leica DVM5000 Guía del usuario
Leica
Leica DMi8A Manual de usuario
Manuales populares de Microscopio de otras marcas
Nikon
Nikon ECLIPSE E200 POL Manual de usuario
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
Olympus
Olympus SZ61 Manual de usuario
AO
AO Cycloptic Manual de usuario
Celestron
Celestron 44345 Manual de usuario