Leica Lino ML90 Manual de usuario

Leica Lino

ML90, ML180

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1Start up

Leica Lino ML series 785880c en

User Manual

Version 785880b

English

Congratulations on your purchase of the Leica Lino

ML Series.

Before starting up the instrument

for the first time, please read

through the entire User Manual

paying special attention to the

section "Safety instructions".

Contents

Start up..................................................................1

Interface ................................................................4

Operation ..............................................................5

Working with receivers ...........................................9

Checking the accuracy .......................................... 16

Technical data...................................................... 19

Care and transport ............................................... 21

Safety instructions ............................................... 23

Warranty ..............................................................27

Start up

Inserting / replacing batteries

1 Lino ML90/180: Turn the release screw on the

battery compartment a 1/4 turn (clock wise) with

the help of a coin or a flat head screw driver to

unlock the battery compartment.

2 Open the battery compartment cover and insert

the batteries, observing the correct polarity.

XCR Catch:

RVL100:Lino ML90/180:

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Start up Leica Lino ML series 785880c en

3 Insert the battery compartment cover on the

bottom side first and then insert the compart-

ment completely until it is fully closed.

4 Then lock the compartment by turning the release

screw a 1/4 turn (counter clock wise).

The battery symbol 6 lights up when the

battery voltage is too low. Replace the batteries as

soon as possible.

• Insert the batteries observing the correct polarity

• Use alkaline batteries or rechargeable batteries

only.

• Remove the batteries if the instrument is not to

be used for a long period of time (to prevent

corrosion).

Charging the rechargeable battery

pack / first-time use

• In case that your Lino ML is equipped with a

rechargeable battery pack you can recharge the

battery pack with the supplied Lino ML charger

(Art Nr. 784967) by connecting the charger to the

jack on the battery door.

• The battery must be charged prior to first use

because it is delivered with as low an energy

content as possible.

• A full charging cycle takes 8 hours and the

charging will automaticly stop after a full cycle.

Each time the charger is connected to the unit a

charging cycle will be initiated. See also battery

status indications on the interface in section

"Interface" on page 4.

• The permissible temperature range for charging is

between 0°C and +40°C/+32°F and +104°F. For

optimal charging we recommend charging the

batteries at a low ambient temperature of +10°C

to +20°C/+50°F to +68°F if possible.

• It is normal for the battery to become warm

during charging.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

3Start up

Leica Lino ML series 785880c en

1LED off: not connected

2LED lights continuously: charging for 8h

3LED blinks: connected but not charging, online

operation possible

4Jack for battery charger

WARNING:

Using a battery charger not recommended by

Leica Geosystems can destroy the batteries. This can

cause fire or explosions.

Precautions:

Only use chargers recommended by Leica

Geosystems to charge the batteries.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Interface Leica Lino ML series 785880c en

Interface

Keypad and control elements

1LASER key

2Horizontal MODE key

3Vertical MODE key

Display

4LED 1 system indicator:

• off: system off

• permanent green: system on

5LED 2 level indication:

• off: levelled

• permanent red: out of level

6LED 3 battery indication:

• off: battery full

• blinking: approx. 2 hours of use

• permanent red: unit switched off due to

battery too low

Special display notices:

Falling below or exceeding the permissible tempera-

ture range: The laser switches off and all LEDs flash.

Environmental conditions might lead to shut off of

the laser before the actual operation temperature

limits are reached.

LASER

Lino

ML180

LASER

Lino

ML90

Lino ML180:Lino ML90:

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

5Operation

Leica Lino ML series 785880c en

Operation

Switching on/off

•ON: Briefly press the LASER key 1.

•OFF: Briefly press the LASER key 1.

Laser functions

Pressing the MODE key 2 and 3activates the

following laser functions:

The plumb beam will be on upon start up of

the unit and will automaticly turn off after 180 sec.

To switch the plumb beam back on short press any

mode key 2and 3(see page 4).

Key

press

ML90

vertical ML180

vertical horizontal

(key 3)(key3)(key2)

default laser A+Bon laser A+B+Con laser Don

1x laser Bon laser A+Bon laser Doff

2x all vertical

lasers off all vertical

lasers off repeat

default

3x repeat

default repeat

default

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Operation Leica Lino ML series 785880c en

Self-levelling and Lock functions

The instrument automatically levels itself within the

specified leveling range (Refer to section "Technical

data" on page 19) .

Leveling process is indicated by the LEDs. See Inter-

face desciption on page 4.

Using the Laser with a receiver

To be able to detect the laser lines over long

distances (> 15 m) or in unfavourable lighting condi-

tions, a laser receiver can be used. Laser lines can be

detected by a receiver that is able to detect pulsed

laser lines. The lines of the Lino ML are permanently

pulsed and are compatible with the range of recom-

mended Leica laser receivers.

See section "Working with receivers" on

page 9.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

7Operation

Leica Lino ML series 785880c en

Applications

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Operation Leica Lino ML series 785880c en

Manual fine adjustment of vertical

lines

The Lino ML90 and ML180 lasers feature the possi-

bility to manually turn the unit 360° around its center

axis and the possibility to fine adjust the unit by ± 4°

turning around the plumb axis. On the ML180 the fine

adjustment can be set to its 0° position by pressing

both mode keys 2and 3(see page 4) at the same

time for more than 2 seconds.

By turning the adjustment knob the laser beams can

be aligned manually.

Additionally to the manual fine adjustment

possibility described above, the Lino ML180 has the

possibility to automatically align itself to the position

of the Leica XCR Catch remote/receiver. For a detailed

description of all functions, please, refer to the

section "Working with receivers" from page 9.

360°

4°

4° 4°

4°

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

9Working with receivers

Leica Lino ML series 785880c en

Working with receivers

Leica RVL100

The Leica RVL100 is a robust and easy to use laser

receiver and can be used with all Leica Lino line lasers.

Keypad

1ON/OFF key: switch the receiver on/off

2Beeper key: change the sound level of the beeper

3Sensitivity key: switch sensitivity (±1mm/±3mm)

Display status symbols

1Sensitivity : fine ±1 mm (default)

2Sensitivity : coarse ±3 mm

3Battery status: full

4Battery status: low

5Beep medium

6Beep high

7Beep off

8Move receiver down

9Move receiver up

RVL100

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Otros manuales para Lino ML90

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Nivel láser de Leica

Leica

Leica Lino L4P1 Manual de usuario

Leica

Leica Jogger 20 Manual de usuario

Leica

Leica LINO L2Gs-1 Manual de usuario

Leica

Leica BLK ARC Manual de usuario

Leica

Leica Rugby 410 Manual de usuario

Leica

Leica Rugby 820 Manual de usuario

Leica

Leica DNA 10 Manual de usuario

Leica

Leica LINO L2P5G Manual de usuario

Leica

Leica DISTO D210 Manual de usuario

Leica

Leica Rugby 610 Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica Rugby 670 Manual de usuario

Leica

Leica Rugby 810 Manual de usuario

Leica

Leica Rugby 640G Manual de usuario

Leica

Leica Rugby 880 Manual de usuario

Leica

Leica Rugby 400 DG Manual de usuario

Leica

Leica NA720 Manual de usuario

Leica

Leica Sprinter 50 Manual de usuario

Leica

Leica Sprinter 150 Manual de usuario

Leica

Leica Rugby 300 SG Manual de usuario

Leica

Leica Rugby 260SG Manual de usuario

Leica

Leica DISTO S910 Manual de usuario

Leica

Leica LS10 Manual de usuario

Leica

Leica Rugby 620 Manual de usuario

Manuales populares de Nivel láser de otras marcas

Nedo

Nedo ET-5 Manual de usuario

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manual de usuario

LaserLiner

LaserLiner X2-Laser Manual de usuario

Spectra

Spectra LL300N Manual de usuario

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manual de usuario

Nedo

Nedo Crossliner 4 Manual de usuario

Lasertec

Lasertec FX360G Manual de usuario

Flex

Flex ALC 8 Manual de usuario

Black & Decker

Black & Decker LZR5 Manual de usuario

Johnson

Johnson 40-6692 Manual de usuario

Cocraft

Cocraft HL 20-SG Manual de usuario

Zircon

Zircon iLine Manual de usuario

HWH

HWH 310 SERIES Manual de usuario

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manual de usuario

LaserLiner

LaserLiner ActiveFinder XP Manual de usuario

DeWalt

DeWalt DW082 Manual de usuario

imex

imex EL20 Manual de usuario

Fixturlaser

Fixturlaser NXA D I-0912 Manual de usuario