Leica Geosystems Builder Series Guía del administrador

Leica Builder Series

How to Guide

Version 1.0

English

Builder, Table of Contents

To use the product in a permitted manner, please refer to the detailed

safety instructions in the User Manual.

Table of Contents

In this manual Chapter Page

How to Getting Started 5

Description of the User Interface 5

Explanation of the Screen 9

Explanation of the Displayed Data 10

How to Set Up Builder Anywhere or over a Ground Point 12

How to Level Up Builder 14

1 How to Set Up Builder to Gain a Known Station 16

1.1 Set Up Anywhere Based on Given Control Line 16

1.2 Set Up over Control Line 18

1.3 Set Up Anywhere with Given Coordinates 20

1.4 Set Up over One Known Point with Second Known Point 24

1.5 Set Up Using Nails from Profile Boards 28

Builder, Table of Contents 3

2 How to Set Up Builder with Height 32

2.1 Transfer Elevation to Builder Placed over Height Benchmark 32

2.2 Transfer Height from Benchmark to Builder 34

3 How to Measure 38

3.1 Measure a Site Surface 38

3.2 Make a Site Survey with Point Descriptions 40

3.3 Measure the Centre of Trees or Columns 42

3.4 Measure the Angle between Inlet and Outlet of a Planned Concrete

Manhole 46

4 How to Layout 48

4.1 Layout Points from Memory 48

4.2 Layout Points from Plan with Line & Offset 50

4.3 Layout Nails on Profile Boards from Control Line 54

4.4 Layout Nails on Profile Boards from Coordinates 56

4.5 Layout Pins with Offset for Rounded Curbs 60

5 How to Measure Heights 64

5.1 Measure the Height of Inaccessible Points 64

5.2 Measure the Height Difference between Two Inaccessible Points 68

5.3 Place a Datum Line 70

5.4 Determine the Height of the Bottom of a Manhole 74

Builder, Table of Contents

6 How to Measure Areas & Volumes 78

6.1 Measure and Calculate a Plane Area 78

6.2 Measure and Calculate a Tilted Area 82

6.3 Measure and Calculate Volumes 86

7 How to Check Verticality 90

7.1 Check the Verticality of a Wall 90

8 How to Check Plane or Tilted Surfaces 94

8.1 Check a Plane Surface 94

8.2 Check a Tilted Surface 96

Builder, How to Getting Started 5

How to Getting Started

Depending on the Builder model some functions might not be available.

Description of the User Interface

Keyboard Builder 100, 200 and 300 Builder 400 and 500

a) Page key

b) Navigation keys

c) ESC

d) Light

e) Function keys

f) 10-digit keypad

g) EDM key

h) LED

ESC

Builder, How to Getting Started

Keys for all Builder models:

Key Description

Changes tab in the tab bar.

Press to switch between the CONFIG, THEO, PROG and DATA

tab pages.

• Move the focus on the screen.

• Start the edit mode for edit fields.

• Control the input bar in edit and input mode.

• Leaves the current menu or dialog without storing changes

made.

•IfTHEO mode is active: press for approximately 5 seconds

to access System Info.

Turns the display light including reticle illumination on and off.

Correspond to the three softkeys that appear on the bottom

of the screen when the screen is activated.

Builder, How to Getting Started 7

Keys only for Builder 400 and 500:

Key/LED Description

• Press button short: to access the EDM settings.

• Press button long: to toggle between red dot and prism.

Alphanumeric keys

• LED white: EDM type is prism.

• LED red: EDM type is red dot.

• LED flashes once if the EDM setting has changed by

toggling or when a measurement is taken.

• LED blinks if EDM measures in tracking mode.

ABC DEF GHI

JKL MNO PQR

STU VWX YZ

/$% _@& *?!

123

0.±

456

789

Builder, How to Getting Started

Sidecover keys

Switch key functionality

Key Description

On / Off key.

Switches the instrument on or off.

Switch key.

The top end of the Switch key is Switch Key 1, the lower end

is Switch Key 2.

Builder model Switch key 1 Switch key 2

100 series Sector beep on/off -

200 series Laser pointer on/off -

300 series Laser pointer on/off -

400 series EDM tracking on/off Switch between Measure/Record,

All in 1 and Measure

500 series Laser pointer on/off Switch between Measure/Record,

All in 1 and Measure

These settings or modes can also be changed in the CONFIG tab page.

Builder, How to Getting Started 9

Explanation of the Screen

Screen

a) Tab bar

b) Time

c) Icons

d) Screen area

e) Softkeys

Element Description

Tab bar The current active tab is shown in black.

Time Shows the current time provided that the setting is made in the

configurations.

Icons Shows the current status information of the instrument.

Screen area The working area of the screen.

Softkeys Commands can be executed using the Softkeys. The commands

assigned to the softkeys are screen dependent.

Builder, How to Getting Started

Explanation of the Displayed Data

Overview

Abbreviation Description

Indicated meteorological corrected slope distance between instru-

ment tilting axis and centre of prism/laser dot.

Indicated meteorological corrected horizontal distance.

Height difference between station and target point.

E, N, H

, N

, H

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Leica Geosystems

Leica Geosystems

Leica Geosystems Rugby 840 Manual de usuario

Leica Geosystems

Leica Geosystems BLK3D Manual de usuario

Leica Geosystems

Leica Geosystems DISTO S910 Manual de usuario

Leica Geosystems

Leica Geosystems GEB373 Manual de usuario

Leica Geosystems

Leica Geosystems BLK360 Manual de usuario

Leica Geosystems

Leica Geosystems iCON iCR70 Manual de usuario

Leica Geosystems

Leica Geosystems DISTO D810 touch Manual de usuario

Leica Geosystems

Leica Geosystems iCON gps 30 Manual de usuario

Leica Geosystems

Leica Geosystems DISTO S910 Manual de usuario

Leica Geosystems

Leica Geosystems BLK3D Manual de usuario

Leica Geosystems

Leica Geosystems iCON iCR80 Manual de usuario

Leica Geosystems

Leica Geosystems TPS700 Series Manual de usuario

Leica Geosystems

Leica Geosystems iCON iCT30 Manual de usuario

Leica Geosystems

Leica Geosystems Roteo 20HV Manual de usuario

Leica Geosystems

Leica Geosystems RoadRunner Manual del producto

Leica Geosystems

Leica Geosystems Leica DISTO E7500 Manual

Leica Geosystems

Leica Geosystems DISTO E7100i Manual de usuario

Leica Geosystems

Leica Geosystems Rugby 640 Manual de usuario

Leica Geosystems

Leica Geosystems Rugby 640G Manual de usuario

Leica Geosystems

Leica Geosystems DISTO D810 Manual de usuario

Leica Geosystems

Leica Geosystems Viva TPS Manual de usuario

Leica Geosystems

Leica Geosystems DISTO A2 Manual de usuario

Leica Geosystems

Leica Geosystems Disto D410 Manual de usuario

Leica Geosystems

Leica Geosystems DISTO WH15 Manual del producto

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario