LEGRAND PRO 21 7756 36 Manual de usuario

PRO 21™

No neutral switch

7756 36

Characteristics

Incandescent lamp

Halogen lamp

ELV halogen lamp with ferromagnetic or electronic



N0064HA4/00

110 V Min. 60 W 60 W 60 VA

Max. 150 W 150 W 150 VA

230 V Min. 60 W 60 W 60 VA

Max. 300 W 300 W 300 VA

Important :

Ferromagnetic transformers must be charged to more

than 60% of their nominal power.

Take account of the efficiency of the ferromagnetic

transformers when calculating the permissible power.

(eg. transformer for a 50 W bulb with efficiency of 0.78

=> actual power consumed by the transformer = 64 VA)

Connection

Voltage 100 - 240 V AC

Frequency 50 - 60 Hz

2 x 1,5 mm2

Depth = 40 mm min.

Radio frequency 868.3 MHz

Range about 200 m, in free field

+ 5°C to + 45°C

Characteristics

Important :

A load must be

connected

before starting

product learning

in a scenario.

ON / OFF

Description

LEARN indicator light

Control

buttons

Identification No.

LEARN button

Communication media

RF => Radio Frequency

Factory settings

On first powering up, pressing the

buttons ON or OFF controls the

lighting point connected to the cut

phase terminal.

Pressing LEARN twice cancels this

general control function.

Operation

The no neutral switch controls the load that is connected to its cut phase terminal ($) using the ON or OFF buttons, or fol-

lowing a command received from a Leader (transmitter) product that it was linked to during the learning(1) of a scenario(2).

It is then the Actor (receiver) of a scenario and can take part in a maximum of 16 scenarios.

It can also command radio products through the RF/PLC interface Cat. No.036 06.

(1) Learn phase :Operation to associate products so that they can be controlled simultaneously from a central point.

This association is carried out by applying the learn scenario procedure on page 5

(2) Scenario :Corresponds to the set of products (actors) that are associated with a command key.







Learn scenario

Key

The indicator lamp

goes off

Press LEARN Press the command key that is to

control the scenario

Press LEARN

Press the command key that is to be

associated with the leader

The indicator lamps of all the products go off.

The scenario is recorded.

Step 1 : Start the learn phase (on the LEADER)

Step 2 : Add an actor to the scenario (on the ACTOR)

Step 3 : Record the scenario (on the LEADER)

To add a number of products to the scenario, repeat operations and for each actor.

The indicator lamp

blinks slowly

The indicator lamp

blinks quickly

The indicator lamp

flashes









Modification of a scenario

Press LEARN Press the command key

that controls the scenario

The indicator lamps of all the product

in the scenario blink.

Press the command key

that is to be associated

Step 1: Open the scenario (on the LEADER)

Press LEARN

To remove the product from the

scenario, go to step 3

Step 2 : Modify the state of an actor in the scenario (on the ACTOR)

Step 3 : Record the scenario (on the LEADER)

Press LEARN

The indicator lamps of all the products go off.

The scenario is recorded.



Clearing a scenario

Press LEARN

The scenario is cleared

Press the command key

and hold it down for 10 s

Clear all the scenarios linked with the command key (on the LEADER)

Press LEARN

Return the product to

factory configuration

Press LEARN and hold

down for 10 s

Clear all the scenarios linked to this product (on the LEADER)

5 s

DECLARATION DE CONFORMITE

Nous déclarons que les produits satisfont aux dispositions de :

We declare that the products satisfy the provisions of

La Directive 1999/5/CE du Parlement européen

et du Conseil du 9 mars 1999 "R&TTE"

sous réserve d'une utilisation conforme à sa destination

on condition that they are used in the manne

et/ou d'une installation conforme aux normes en vigueur

intended and/or in accordance with the curren

et/ou aux recommandations du constructeur

installation standards and/or with the manufacturer'

recommandantion

Ces dispositions sont assurées pour la directive 1999/5/CEE par la conformité aux normes suivantes :

These provisions are ensured for directive 1999/5/CEE by conformity to the following standards

EN 300220-3

EN 55022

EN 60669-2-1

PRO 21™

Funk- Schalter ohne Neutralleiter

7756 36

Technische Daten

Glühlampe

Hochvolt Halogenlampe

Niedervolthalogenlampen mit konventionellem trafo



110 V Min. 60 W 60 W 60 VA

Max. 150 W 150 W 150 VA

230 V Min. 60 W 60 W 60 VA

Max. 300 W 300 W 300 VA

Wichtig :

Die Last der elektronischen Trafos muss mehr als 60 %

ihrer Nennleistung betragen.

Bei der Berechnung der zulässigen Höchstlast muss

der Wirkungsgrad der elektronischen Trafos berück-

sichtigt werden.

(Beispiel: Trafo für eine Lampe mit 50 W mit einem

Wirkungsgrad von 0,78 => effektive Leistungsaufnahme

des Trafos = 64 VA)

Hinweis :

El. Trafos haben in der Regel einen Wirkungsgrad nahe

1 (0,98). Daher ist diese Berechnung in vielen Fällen

nur bei gewickelten Trafos erforderlich.

Anschluss

Spannung 100 - 240 VA

Frequenz 50 - 60 Hz

2 x 1,5 mm2

Einbautiefe = min. 40 mm

Funkfrequenz 868.3 MHz

Reichweite ca. 200 m ohne Hindernisse

+ 5°C bis + 45°C

Technische Daten

Wichtig :

Vor dem Einlernen

des Gerätes muss

eine Last ange-

schlossen werden.

Tabla de contenidos

Idiomas:

Otros manuales de Cambiar de LEGRAND

LEGRAND

LEGRAND VANTAGE CIS10-DIN Manual de usuario

LEGRAND

LEGRAND DW-311 Manual de usuario

LEGRAND

LEGRAND 882 10 Manual de usuario

LEGRAND

LEGRAND Wattstopper WS-301 Manual de usuario

LEGRAND

LEGRAND Luxul AV Series Manual de usuario

LEGRAND

LEGRAND Pro 21 7756 44 Manual de usuario

LEGRAND

LEGRAND HS4658 Manual de usuario

LEGRAND

LEGRAND 916 30 Manual de usuario

LEGRAND

LEGRAND Raritan Dominion User Station Manual de usuario

LEGRAND

LEGRAND WattStopper RS-150U Manual de usuario

LEGRAND

LEGRAND 0 670 26A Manual de usuario

LEGRAND

LEGRAND Valena Life 7 521 90 Manual de usuario

LEGRAND

LEGRAND WNRL64 Manual de usuario

LEGRAND

LEGRAND Plexo 697 06 Manual de usuario

LEGRAND

LEGRAND Qmotion QIS Manual de instalación

LEGRAND

LEGRAND 0 672 33 Manual de usuario

LEGRAND

LEGRAND Niloe LE-764500 Manual de usuario

LEGRAND

LEGRAND Wattstopper InteliSwitch AS-100 Manual de usuario

LEGRAND

LEGRAND LEXIC 037 23 Manual de usuario

LEGRAND

LEGRAND HPM Vivo EVM970L Series Manual de usuario

LEGRAND

LEGRAND PRO 21 Galea Sistena NGS Solfa Smart Control 7759... Manual de usuario

LEGRAND

LEGRAND Plexo 698 50 Manual de usuario

LEGRAND

LEGRAND Galion 282418-C1 Manual de instrucciones

LEGRAND

LEGRAND In One Mosaic 916 19 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario