LEGRAND PRO 21 7756 29 Manual de usuario
PRO 21™
Radio central shutter switch
7756 29
Characteristics Connection
N0064HB7/00
Power supply 1 lithium battery CR 2032
Radio frequency 868,3 Mhz
Range approx. 200 m in free field
+ 5°C to + 45°C
2
Description
LEARN indicator light
Control buttons
Identification No.
LEARN key
Communication media
RF => Radio Frequency
Factory setting
When first powered up, pressing
the Up - Stop - Down buttons
controls all the opening points (rol-
ler shutter or blind) of the “In One
by Legrand” installation.
Pressing Learn(1) cancels this gene-
ral control function.
(1) Programming or learning button.
3
Operation
The radio central shutter switch can simultaneously control a group of products (actors) linked to it during the learning(1)
using its Up - Stop - Down buttons; it is then the scenario Leader(2).
It is only necessary to learn the Up key. The Stop and Down keys are learned automatically.
The radio central shutter switch is always the central control point (Leader) of a scenario.
It can control either radio or mains borne signalling products through the RF /PCL interface Cat. No. 036 06.
(1) Learning: action of linking products to be controlled simultaneously from a central point. This linking is performed
by applying the scenario learning procedure on page 4.
(2) Scenario: corresponds to all the products (actors) that are linked to a control button.
4
Learn scenario
Key
The indicator lamp
goes off
Press LEARN Press the command key that is to
control the scenario
Press LEARN
Press LEARN
Press the command key that is to be
associated with the leader
The indicator lamps of all the products go off.
The scenario is recorded.
Step 1 : Start the learn phase (on the LEADER)
Step 2 : Add an actor to the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)
To add a number of products to the scenario, repeat operations and for each actor.
The indicator lamp
blinks slowly
The indicator lamp
blinks quickly
The indicator lamp
flashes
5
Modification of a scenario
Press LEARN Press the command key
that controls the scenario
The indicator lamps of all the product
in the scenario blink.
Press the command key
that is to be associated
Step 1: Open the scenario (on the LEADER)
Press LEARN
or
Press LEARN
To remove the product from the
scenario, go to step 3
Step 2 : Modify the state of an actor in the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)
Press LEARN
The indicator lamps of all the products go off.
The scenario is recorded.
6
Clearing a scenario
Press LEARN
The scenario is cleared
Press the command key
and hold it down for 10 s
Clear all the scenarios linked with the command key (on the LEADER)
Press LEARN
Return the product to
factory configuration
Press LEARN and hold
down for 10 s
Clear all the scenarios linked to this product (on the LEADER)
5 s
5 s
7
Battery replacement
8
DECLARATION DE CONFORMITE
Nous déclarons que les produits satisfont aux dispositions de :
We declare that the products satisfy the provisions of :
La Directive 1999/5/CE du Parlement européen
et du Conseil du 9 mars 1999 "R&TTE"
sous réserve d'une utilisation conforme à sa destination on condition that they are used in the manner
et/ou d'une installation conforme aux normes en vigueu
r
intended and/or in accordance with the current
et/ou aux recommandations du constructeu
r
installation standards and/or with the manufacturer's
recommandantions
Ces dispositions sont assurées pour la directive 1999/5/CEE par la conformité aux normes suivantes :
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards :
EN 60669-2-1
EN 300220-3
CEI 61000
9
PRO 21™
Zentraler Funk-Rollladenschalter
7756 29
Technische Daten Anschlüsse
Spannungsversorgung
1 x Lithiumbatterie CR 2032
Funkfrequenz 868,3 Mhz
Reichweite ca. 200 m freies Feld
+ 5°C bis + 45°C
10
Werkseinstellung
Bei erstmaliger Inbetriebnahme
(Spannungsversorgung) werden
alle Teilnehmer innerhalb einer
Anlage über die AUF-STOP-AB
Tasten zentral angesteuert
(Zentralbefehl).
Diese Werkseinstellung kann durch
zweifaches Drücken der LEARN-
Taste gelöscht werden.
(1)Programmiertaste („Lerntaste“)
Beschreibung
Leuchtdiode der LEARN-Taste
Bedientasten
Gerätenummer
LEARN-Taste
Kommunikationsmedien
RF = Funkfrequenz
Tabla de contenidos
Idiomas:
Otros manuales de Cambiar de LEGRAND
LEGRAND
LEGRAND 2500 W RF Manual de usuario
LEGRAND
LEGRAND HS4658 Manual de usuario
LEGRAND
LEGRAND Wattstopper DSW-302 Manual de usuario
LEGRAND
LEGRAND WattStopper UW-100 Manual de usuario
LEGRAND
LEGRAND Pass & Seymour 1595SWT Manual de usuario
LEGRAND
LEGRAND Wattstopper LMSW-101 Manual de usuario
LEGRAND
LEGRAND Celiane 67 Series Manual de usuario
LEGRAND
LEGRAND Adorne sofTap WNAL10 Manual de usuario
LEGRAND
LEGRAND Wattstopper HDLS1SS Manual de usuario
LEGRAND
LEGRAND Wattstopper LMDM-101 Manual de usuario
LEGRAND
LEGRAND LIMOGES Cedex 87045 Manual de usuario
LEGRAND
LEGRAND Pass & Seymour RRW600V Manual de usuario
LEGRAND
LEGRAND Raritan Dominion User Station Manual de usuario
LEGRAND
LEGRAND WNRL64 Manual de usuario
LEGRAND
LEGRAND Arteor Manual de usuario
LEGRAND
LEGRAND Chief Kontour KPWR Series Manual de usuario
LEGRAND
LEGRAND 672 63 Manual de usuario
LEGRAND
LEGRAND 0 672 21 Manual de usuario
LEGRAND
LEGRAND adorne WNAL23 Manual de usuario
LEGRAND
LEGRAND 036 12 Manual de usuario
