LEGRAND C2G31017 Manual de usuario



-



-



-





............................................

..........................................................

...........................................

 ............................................

........................................................

 .........................................

..........................................................

...............................

 ..............................................................

 ..............................................

.................................................

’ .....................................

........................................

 .........................................................

..................................................

 ..................................................

..............................

 ......................................................

 ................... 

................................................. 

 .................................. 

 ...................................... 

........................................................ 

 ............................................ 

 ........................................................ 

 ................................

............................................................... 

  













-

Transmier Transmier

8 SELECT Input selection button.

9 IR SENSOR Receives IR signal from IR remote.

10 EDID EDID Switch for VGA EDID management. For more

information, see EDID Management section.

REAR PANEL DESCRIPTION

11 HDBT OUT HDBaseT Output. Connect to an HDBaseT receiver.

12 Power IN For local DC 12V input.

13 Power OUT For DC 12V output when the “Power In” port is connected

to local power supply. If the transmitter is powered by

PoC, this port doesn’t output power.

14 RS232 For RS232 pass-through.

15 IR OUT IR signal output. Connect to an IR emitter using the 2-pin

phoenix connector provided.

FRONT PANEL DESCRIPTION

1 VGA IN VGA input. Connect to a VGA source.

2 VGA AUDIO Audio input embedded with VGA input.

3 HDMI IN HDMI input. Connect to an HDMI source.

4 UPDATE Micro USB port. Connect to a PC for firmware upgrade.

5 Input Selection LEDs LED On: Corresponding input channel is selected.

6 HDCP LED

On: HDCP protected content is being transmitted.

Blinking: Non-HDCP protected content is being transmitted.

Off: No content is being transmitted.

7 LINK LED On: HDBT link is normal.

Off/Blinking: No HDBT link or link error.

①

②

③

④⑤

⑥

⑦

⑧

⑨

⑩

⑫

⑪

⑬⑭⑮





• HDMI and VGA inputs AV switching transmier.

• Supports automac switching.

• HDMI input up to 4K@60Hz (YUV 4:2:0) and HDCP 2.2, VGA input up to 1920x1200@60Hz.

• Via a Cat 6a/7 cable, transmits 4K@60Hz (YUV 4:2:0) up to 40m/131 and 1080P@60Hz

signal up to 70m/230.

• Via a Cat 5e/6 cable, transmits 4K@60Hz (YUV 4:2:0) signal up to 35m/115 and

1080P@60Hz signal up to 60m/197.

• Supports RS232 and IR pass-through over HDBaseT.

• Supports one-way PoC funcon, the transmier can be powered by the receiver with PSE

module.

• Can be powered by local DC 12V power supply and share power with near device via the

2-pin phoenix power out connector.

• Independent DIP switch provided for VGA EDID management.

• HDMI input EDID is copied from HDBaseT receiver.

• Supports rmware update.



• 1 x Wall Plate Transmier

• 1 x Wall Plate Plasc Panel (2‐Gang US,

with Screws)

• 1 x Phoenix Male Connector (3.5mm, 3 Pins)

• 3 x Phoenix Male Connectors (3.5mm, 2 Pins)

• 4 x Mounng Screws

• 1 x Manual





-







-



Warnings:

• Before wiring, disconnect the power from the device.

• During wiring, connect and disconnect the cables gently.

Steps for device wiring:

1. Connect HDBT: Connect HDBT OUT of the transmier to

HDBT IN of an HDBT receiver via a Cat 5e/6/6a/7 cable.

2. Connect an HDMI display to the receiver.

3. Connect power adapter to the receiver.

4. Connect a power adapter to the transmier (If the receiver

includes PSE module, it can send power to the transmier

and no addional power adapter is required at transmier

side).

5. Connect the video sources to the transmier.

6. Power on all aached devices.

7. Select a desired video source through automac or manual

switching funcon.



Input Select Buon and Switching

• This transmier will select an acve input or the rst-come rst-served if both inputs are acve.

• The input select buon can select either input source only if both inputs are acve.

Key funcon descripon:

1. If HDMI IN and VGA IN are both connected to the source devices, and HDMI IN is selected as current source, pressing the input select buon

will switch to VGA as source. If the VGA source is unplugged, it will switch back to HDMI IN automacally.

2. If only HDMI IN is connected to the source device, and HDMI IN is selected as current source, pressing the input select buon will have no

eect and it will remain as HDMI IN.







-



The transmier equips a 3-pin DIP switch on front panel for EDID conguraon of VGA input.

By default, the EDID switch is set in “010” posion. To congure EDID for VGA input, refer to

the following table:

Note:

• The EDID conguraon changes of VGA input will take

eect immediately.

• HDMI input EDID is copied from HDBaseT receiver.



This product supports rmware upgrading through Micro USB port. Please contact your supplier to get the latest upgrade tool “Legrand Product

Firmware Updater”. Note：Don’t power o the device during upgrade process.

Steps to upgrade FW:

1. Connect the Micro USB port of the device to a PC.

2. Connect the power adapter provided to the device, and power on the device.

3. Click to run the “Legrand Product Firmware Updater” soware. The interface of the soware is as follows:

Introducon of the “Firmware Updater”:

• 1: Select C2G31017.

• RS232:

• Port: Select the correct COM Port number.

• Baud rate: Select the correct baud rate, the correct baud rate for

upgrading is 57600.

• Connect: Click the buon to connect with the device.

• FW version: Click “Check” buon to check the current FW version

of the device aer successful connecon.

• Update File:

• Click “Browse” to select the FW upgrade bin le from the local PC.

• Update:

• Click the buon to start upgrading FW aer the bin le is uploaded.

• Log: Show the log of the operaons on the soware and returning

informaon of the device.

• Clear: Click the buon to clear up all the log in the white box.

• 2: The progress bar will show the upgrading process.







-



4. Click “Browse” to select the upgrade bin le from the local PC and click “Update” to start upgrading rmware of the device.

Note: Don’t power o the device during upgrade process.







-





-







’

















--

Tabla de contenidos

Idiomas:

Otros manuales de Extensor de LEGRAND

LEGRAND

LEGRAND QMotion QMOLEEDZRX Manual de usuario

LEGRAND

LEGRAND QMOLEEDZRX Manual de usuario

LEGRAND

LEGRAND C2G C2G30010 Manual de usuario

LEGRAND

LEGRAND C2G30018 Manual de usuario

LEGRAND

LEGRAND C2G C2G30017 Manual de usuario

LEGRAND

LEGRAND 0 517 38 Manual de usuario

LEGRAND

LEGRAND 0 517 38 Manual de usuario

LEGRAND

LEGRAND C2G RapidRun 60218 Manual de usuario

LEGRAND

LEGRAND C2G60220 Manual de usuario

LEGRAND

LEGRAND C2G C2G41003 Manual de usuario

LEGRAND

LEGRAND C2G30011 Manual de usuario

LEGRAND

LEGRAND CHIEF FCAX08 Manual de usuario

LEGRAND

LEGRAND C2G31012 Manual de usuario

LEGRAND

LEGRAND C2G30012 Manual de usuario

LEGRAND

LEGRAND C2G RapidRun 60218 Manual de usuario

LEGRAND

LEGRAND C2G30055 Manual de usuario

LEGRAND

LEGRAND C2G 29975 Manual de usuario

LEGRAND

LEGRAND C2G C2G30013 Manual de usuario

LEGRAND

LEGRAND C2G 29298 Manual de usuario

LEGRAND

LEGRAND C2G30022 Manual de usuario

LEGRAND

LEGRAND C2G31020 Manual de usuario

LEGRAND

LEGRAND AC1030 Manual de usuario

LEGRAND

LEGRAND C2G C2G54278 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario