LECTURER LTC-S2007 Manual de usuario
Lecturer Tracking Cameras
User Manual V1.0
SAFETY NOTICE-IMPORTANT!!!
The following important notes must be followed carefully to run the camera and respective
accessories in total safety. The camera and relative accessories are called video system in
this section.
Before installing the camera, please read this manual carefully. Please follow installation
instructions indicated in this manual during installation. Please keep this manual for future
use.
The installation should be performed by qualified service personnel or system installers in
accordance with all local rules.
Before powering on the camera, please check the power voltage carefully. Make sure that
you are using the correct power source.
Please put the power cable, video cable and control cable in safe place.
Do not operate the camera beyond the specified temperature and humidity. Working
temperature range of the camera is between 0℃and +40℃. The ambient humidity range is
less than 95﹪.
During transporting, avoid violent shake or force to the camera.
To prevent electric shock, do not remove screws or housing of the camera. There are no
self-serviceable parts inside. Refer to qualified service personnel for servicing.
Video cable and RS485/RS232 cable should be kept far away from other cables. Shielded
and independent wiring is necessary for video and control cables.
Never aim the lens of the camera at the sun or other extremely bright objects. Otherwise, it
may cause damage.
When cleaning the camera, please use soft cloth. If the camera is very dirty, wipe it off
gently with a soft cloth moistened with a weak solution of water and a neutral kitchen
detergent. Wring all liquid from the cloth before wiping the camera, then wipe off all
remaining dirt with a soft, dry cloth. Use lens cleaning paper to clean the lens.
Do not move the camera head manually. In doing so would result in malfunction of the
camera. Do not hold the camera head when carrying the video camera.
Make sure the camera is not directly exposed to rain and water.
Make sure the camera is far away from area where radiation, X-rays, strong electric
waves, or magnetism is generated.
Attention
If you need to extend the power cable, please extend the
power cable from the part 1 on below picture (220V/110V), do
not extend from part 2 on below picture (DC12V), otherwise it
will cause unexpected damage to the device.
CONTENTS
ABOUT THE PRODUCT-------------------------------------------------------- 1
FEATURES -------------------------------------------------------------------------------- 1
CHARACTERISTICS &FUNCTIONS----------------------------------------------------------- 1
LIST OF PARTS &ACCESSORIES ----------------------------------------------------------- 2
MAIN PARTS &INTERFACES---------------------------------------------------------------- 2
CABLE CONNECTING INSTRUCTIONS --------------------------------------- 4
HD-SDI 1(FULL-VIEW CAMERA)INTERFACE ------------------------------------------------ 4
HD-SDI 2(TRACKING CAMERA)INTERFACE ------------------------------------------------- 4
CONTROL CABLE(RS485,RS232)---------------------------------------------------------- 4
POWER CONNECTION---------------------------------------------------------------------- 5
INSTALLATION INSTRUCTIONS----------------------------------------------- 6
WALL MOUNT INSTALLATION --------------------------------------------------------------- 6
PENDANT MOUNT INSTALLATION ----------------------------------------------------------- 7
PARAMETERS SETTING ------------------------------------------------------ 8
SETTING PROCESS ------------------------------------------------------------------------ 8
MAIN MENU ---------------------------------------------------------------------------- 10
ISMART PARAM SETPAGE----------------------------------------------------------------- 11
ADVANCED PARAM SETPAGE ------------------------------------------------------------- 12
FIRMWARE UPGRADE--------------------------------------------------------------------- 14
MENU SETTINGS ------------------------------------------------------------ 15
MENU CONFIGURATION ------------------------------------------------------------------- 15
MENU EXPLANATION---------------------------------------------------------------------- 19
VIDEO ---------------------------------------------------------------------------------- 20
EXPOSURE ---------------------------------------------------------------------------- 20
WHITE BALANCE----------------------------------------------------------------------- 22
PAN/TILT/ZOOM------------------------------------------------------------------------ 22
SYSTEM-------------------------------------------------------------------------------- 23
STATUS -------------------------------------------------------------------------------- 24
RESTORE DEFAULTS------------------------------------------------------------------ 24
ANNEX 1 TECHNICAL SPECIFICATIONS------------------------------------ 25
ANNEX 2 SIZE AND DIMENSION -------------------------------------------- 27
TROUBLESHOOTING-------------------------------------------------------- 28
1
ABOUT THE PRODUCT
ABOUT THE PRODUCT
Features
The Lecturer tracking camera adopts the most
advanced face recognition and tracking
algorithm based on image analysis to detect,
lock and track moving target ; it can realize
smooth tracking performance automatically; It
can precisely lock the moving target in the
center of the image.
With its stability, easy-to-use and excellent
performance, it is widely used in electronic
classroom, distance learning, technical
training and video conferencing room, etc.
Characteristics & Functions
Featured Advantages
Advanced face recognition and tracking
algorithm based on image analysis;
Integrated Full HD panoramic camera and Full
HD tracking camera. Both HD videos can be
outputted at 1080p60 simultaneously;
Tracking range can cover the whole
classroom, even the target is walking among
the students;
Precisely and stably track a specific target,
free from any light & moving interference;
Tracking camera and full-view camera can be
set to automatically switch mode.
Intelligent Tracking
Smooth tracking performance, free from
interference of other moving objects, also
even if the target turns around, stands still for
a long time or his / her other small gestures
will not affect the tracking effect;
Auto zoom performance during tracking.;
Suits all kinds of classroom with different size,
shape and type;
Smart AE technology to effectively avoid the
interference of complicated lights from
projectors, monitors etc.
Simple Configuration
1 priority zone, and 8 blocking zones can be
easily set through control software;
Customizable output code when target
appears or lost;
User-friendly interface, simple parameter
settings, parameters can be set via
RS-485/232.
2
List Of Parts & Accessories
When you open the box, check all accessories
according to the packing list.
Camera (1)
Power Adapter (1)
Cable Package (1)
Main Parts & Interfaces
Camera
Front View
1 Tracking Camera
2 Full-view Camera
Rear View
3 Audio (Not Supported Temporarily)
4 Debugging Interface (For Upgrading)
5 HD-SDI 1 Interface (Full-view Camera)
6 HD-SDI 2 Interface (Tracking Camera)
7 Control Interfaces (RS485, RS232)
8 Power Input (DC12V)
3
ABOUT THE PRODUCT
Bottom View
9 Mounting Hole
1/4”inch screw thread for fixing camera.
10 Locating Hole
To define installation direction of camera.
4
CABLE CONNECTING INSTRUCTIONS
Connect the camera to relative devices with the cables supplied with the camera.
HD-SDI 1 (full-view Camera) Interface
HD-SDI 2 (tracking camera) Interface
Control Cable(RS485,RS232)
Pin#
Pin Definition
1
/
2
/
3
TXD
4
GND
5
RXD
6
GND
7
485+
8
485-
Tabla de contenidos
