Leckey KIT Manual de usuario
KIT Seating System
User Instructions
Il sistema di postura KIT
Istruzioni per l’uso
Das KIT-Sitzsystem
Bedienungsanleitung
Le système d’assise KIT
Consignes d’utilisation
El sistema KIT de asiento
Instrucciones de Usuario
1. Intended Use
The KIT Seating System is a seat that
has been designed for use by adults
and teenagers (from 12 years old) with
disabilities, in the home, in day centres,
in schools and outdoors, if used on a
mobility base. The seating system has a
maximum user weight of 75kg (165lbs).
The seating system is modular and can be
used with a choice of indoor or outdoor
chassis. The Hi-low chassis has been
designed for indoor use but can also be
used outdoors on an even surface. The
Hi-low chassis should never be exposed
to the elements as this may corrode the
metal components.
The Kit seat unit will interface with a
range of mobility bases, the details of
which can be found on our website,
www.leckey.com.
2. Declaration of Conformity
James Leckey Design Ltd as manufacturer
with sole responsibility declares that
the Kit Seating System conforms to the
requirements of the 93/42/EEC Guidelines,
Medical Device Regulations 2002 and EN
12182 Technical aids for disabled persons
and test methods.
3. Terms of Warranty
The warranty applies only when the
product is used according to the
specified conditions and for the intended
purposes, following all manufacturers’
recommendations (also see general terms
of sales, delivery and payment). A two
year warranty is provided on all Leckey
manufactured products and components.
4. Product History Record
Your Leckey product is classified as a
Class 1 Medical Device and as such
should only be prescribed, set up or
reissued by a technically competent
person who has been trained in the use
of this product. Leckey recommend that
a written record is maintained to provide
details of all set ups, reissue inspections
and annual inspections of this product.
5. Product Training Record
(Parents, Teachers & Carers)
Your Leckey product is classified as a
Class 1 Medical Device and as such
Leckey recommend that parents, teachers
and carers using the equipment should
be made aware of the following sections
of this user manual by a technically
competent person:
Section 6
Safety Information
Section 8
Clinical Set up for Postural Management
Section 9
Cleaning and Care
Section 10
Daily Product Inspection
Leckey recommend that a written record
is maintained of all those who have trained
in the correct use of this product.
6.1 Always read instructions fully before
use.
6.2 Users should not be left unattended at
any time while using Leckey equipment.
6.3 Only use Leckey approved components
with your product. Never modify the
product in any way. Failure to follow
instructions may put the user or carer
at risk and will invalidate the warranty on
the product.
6.4 If in any doubt to the continued safe
use of your product or if any parts should
fail, please cease using the product and
contact our customer services department
or local dealer as soon as possible.
6.5 Carry out all positional adjustments
and ensure that they are securely fastened
before you put the user into this product.
Some adjustments may require the use of
a tool which is provided with each product.
Keep all tools out of reach of children.
6.6 When placing the user into a seating
system, for safety and positional reasons,
always secure the Pelvic Cradle first.
6.7 When the product is stationary ensure
that all wheels are locked and facing away
from the base as this will improve product
stability. This is especially important
when the tilt in space or back recline
facility is in use.
6.8 When the seat is in use on the Hi-low
chassis we do not recommend that the
users are moved over uneven surfaces
when in the equipment. All due care
and attention should be taken when
transporting the user in and out of the seat.
6.9 Never leave the product on a sloping
surface, greater than 5 degrees. Always
remember to lock all the wheels.
6.10 Only use the push handles to steer
and move the seat from one area to
another. Never use the tray for this
purpose.
6.11 The product contains components
which could present a choking hazard to
small children. Always check that locking
knobs and bolts within the user’s reach are
tightened and secure at all times.
6.12 Leckey products comply with fire
safety regulations in accordance with
EN12182. However the product contains
plastic components and therefore should
be kept away from all direct sources of
heat including naked flames, cigarettes,
electric and gas heaters.
6.13 Do not place hot items greater than
40º centigrade on the tray.
6.14 Clean the product regularly. Do
not use abrasive cleaners. Carry out
maintenance checks on a regular basis to
ensure your product is in good working
condition.
6 Safety Information
The KIT Seating System has been crash
tested and passed for use in vehicles.
It has been tested in its complete
configuration on a surrogate base with a
Leckey head support attached.
If the KIT Seating System is being used
in a vehicle, the following points must be
adhered to:
The KIT Seating System must be
positioned forward facing and used
with an Unwin Restraint System and a
Leckey head support, which should be
suitably positioned at all times during
transportation. The head support is
available as an optional accessory with
the KIT Seating System.
The KIT Seating System is crash tested
and meets the requirements of ISO 16840
part 4. The seat has also been tested and
meets the requirements of ISO 7176-19.
The crash tests were carried out using
a chest harness and Pelvic Cradle.
For further details please contact our
Customer Service Department.
Important
If you are using the KIT Seating System
on a wheelchair base, please refer to the
wheelchair manufacturer’s handbook for
crash test details.
KIT Seating System –
Crash Test
6.15 When the product is not in use, it
should be stored in a dry place that is not
subjected to extremes of temperature. The
safe operating temperature range of the
product is +5 to +40 degrees Celsius.
6.16 Always check the ratchet handles on
the push handle are tightened securely
before you move the seat unit.
6.17 Before using the seating system
always check that the interface handle
on the seat unit is fully engaged with the
chassis and the locking pin is engaged.
If the handle is not engaged properly, the
seat unit may come loose and could cause
serious injury to the user or carer.
Das
Auspacken und
Aufbauen des
Sitzsystems
sowie das
Anbringen der
Polster 7
Das Überprüfen der Teile
Wir beglückwünschen Sie zum Kauf eines
KIT-Sitzsystems. Achten Sie beim Öffnen
des Kartons darauf, nicht durch das Band
zu schneiden, da Sie sonst einige der darin
enthaltenen Teile beschädigen könnten. Alle
Teile sind einzeln in deutlich beschrifteten
Plastiktüten verpackt. Packen Sie die Teile
vorsichtig aus den Schachteln aus und
überprüfen Sie alle Teile, die Sie bestellt
haben.
Sicherheit geht vor
Halten Sie die Plastiktüten von Kindern
fern.
Einige Zubehörteile müssen zuerst
aufgebaut werden, bevor Sie diese an das
Sitzuntergestell, das Sie erworben haben,
anbringen. Sorgen Sie dafür, dass Sie zuerst
den Adapter an das Untergestell montieren,
falls Sie den Sitz an ein bewegliches
Untergestell anbringen möchten. Die
Anweisungen zum Anbringen des
Zwischenstücks an spezifische Untergestelle,
werden mit dem Adapter geliefert. Sobald
Sie alle Bauteile überprüft haben, steht
Ihnen beim Aufbau des KIT-Sitzsystems
und dem Anbringen an sein Untergestell
nichts mehr im Wege. Folgen Sie bitte der
vorgeschlagenen Reihenfolge, da es oft
einfacher ist die Polster anzubringen, bevor
Sie das Gerät aufbauen.
Werkzeuge
Einige der Anpassungen erfordern den
Gebrauch von Universalwerkzeug, eines
Inbusschlüssels oder eines 13 mm
Schraubenschlüssels, enthalten in jedem Set.
7.1 Das Anbrigen der Sitzeinheit
an das Hi-Low-Fahrgestell
Vor dem Befestigen der Sitzeinheit an das
Untergestell, heben Sie das Fahrgestell bis
zu seinem Maximum an, um die Gefahr einer
Rückenverletzung zu vermindern.
Entfernen Sie den Sicherungsstift vorne am
Sitz, indem Sie den Stift (A) herausziehen,
und ihn um 90 Grad drehen. Kippen Sie den
Sitz vorsichtig, und platzieren Sie ihn auf das
Fahrgestell, indem Sie den Kanal (B) auf der
Rückseite des Sitzes über der Röhre hinten
am Fahrgestell (C) ausfindig machen.
Ziehen Sie den Handgriff (D), der sich vorne
an der Sitzeinheit befindet hoch, und dann
schwenken Sie den Sitz nach unten. Sobald
der Sitz vollständig abgesenkt ist, lösen Sie
den Handgriff, und drücken ihn vorwärts,
um sicherzustellen, dass er am Vorderrohr
vollständig eingerastet ist. Drehen Sie den
Sicherungsstift (A), sodass er vor dem
Handgriff einrastet.
Überprüfen Sie stets, ob Handgriff und
Sicherungsstift vollständig eingerastet
sind, bevor Sie den Benutzer in das
Sitzsystem platzieren. Falls der Handgriff
nicht richtig eingerastet ist, kann sich die
Sitzeinheit lösen, und der Benutzer könnte
somit ernsthafte Verletzungen erleiden.
DA
A
B
C
7.2 Die abnehmbare
Rückenstange
Die Rückenstange wird für den Transport
abmontiert.
Setzen Sie die Rückenstange in die
Seitenbleche der Sitzeinheit ein, indem Sie
den vorderen Steckstift (A) in den vorderen
Schlitz (B)auf beide Seiten der Sitzheinheit
stecken. Klappen Sie die Stange zurück.
Stecken Sie den Steckstift (C) durch das
Ende der Stange.
C
A
B
B
A
Otros manuales para KIT
1
Tabla de contenidos
Idiomas:
Otros manuales de Silla de ruedas de Leckey
Leckey
Leckey Mygo Manual de usuario
Leckey
Leckey Mygo Manual de usuario
Leckey
Leckey leeway Manual de usuario
Leckey
Leckey Tour Mobility Base Manual de usuario
Leckey
Leckey Mygo Manual de usuario
Leckey
Leckey Comfee Seat Manual de usuario
Leckey
Leckey firefly splashy BIG Manual de usuario
Leckey
Leckey ls105-05 Manual de usuario
Leckey
Leckey LS240-04 Manual de usuario
Leckey
Leckey Everyday Activity Seat Manual de usuario
