laxihub O2 Manual de usuario
Outdoor Smart WiFi Camera
Quick Guide
O2
EN
FR
NL
ES
PT
DE
IT
RU
TU
Outdoor Wi-Fi Camera
Caméra Wi-Fi extérieure
wifi-camera voor buiten
Cámara wifi al aire libre
Câmera Wi-Fi externa
Wi-Fi-Außenkamera
Telecamera Wi-Fi esterna
Уличная камера Wi-Fi
Açık Wi-Fi Kamera
EN
Product description
EN
Constant blue
Blue slow flashing
Red flashing slowly
Red flashing fast
Connection succeeded
Manual configuration mode
Waiting to connect
Network abnormal
LED Indicator:
Set up Camera
• What you'll need：
1. Wi-Fi and a working broadband internet connection
with at least 2 Mbps upload speed.
2. A phone or tablet with iOS 9/Android 5.0 or later.
3. A power outlet.
4. A Phillips screwdriver or power drill with Phillips driver bit.
• Power on
Plug the power cable into the Micro-USB power port on
the back of the camera, the camera will automatically turn
on, wait for 30s, the indicator light will flash red slowly
means boot up is finished.
Please read this manual carefully before using the product
and keep it properly. Label information is located on the
side of the camera.
Packing list：
Camera, Power adaptor, Power cable, Mounting accessory
bag, Quick guide.
1. Microphone
2. LED indicator
3. SD card slot
4. Reset
5. Micro USB
6. Speaker
1
2
3
4
5
6
EN
EN
• Connect Arenti APP
Scan QR code to download and install the Arenti APP.
Also, you can search "Arenti" on App Store (IOS) or Play
Store (Android). Download and install Arenti APP. Open
APP home page, Click "+" at the right top page. Follow the
guide on the APP to add the camera step by step.
After connection is successful, the indicator is solid blue.
Troubleshooting
• Camera is not powering on:
1. Try to use another outlet.
2. Try to use another 5V power adapter/cable to power up.
• Failed to scan the QR code from Arenti APP:
1. Remove the film from the Camera Lens.
2. Keep distance 10-15 cm (4-6 inch) between the camera
and mobile phone.
3. Confirm the camera indicator is red flashing slowly.
• Failed to connect WiFi:
1. Confirm that scan QR code is successful: After scanning,
the camera has the prompt sound, and network indicator
turns to red fast flashing.
2. Make sure input correct WiFi password, the WiFi password
you set not contain special characters such as =\';.
3. Make sure the WiFi band meets the network requirement
of camera that camera only supports 2.4GHz.
4. Confirm camera is near the WiFi router.
If there doesn’t work please share the wifi router setting
screenshot and camera SN (Find on camera body) to
1m
2m
3m
2m 10m
Installation
EN
EN
Find a position where you can get the desired field of view.
Consider the below factors:
1. Avoid direct sunlight.
2. Keep it in range of your router WiFi.
3. Avoid the front of the lens facing the plant or porch
light; Avoid facing a busy road.
4. Place it 2-3 meters (79-118 inch) above the ground -
close enough to see someone's face and talk to them
through the camera. Make sure that the camera can see
what you want to see.
• Screw Bracket Installation
1. Fix the screw bracket on the wall with screws.
2. Install the device in the bracket and lock it with the
bottom screw.
EN
EN
Camera Using tips
• Live video viewing:
In the camera control interface of APP, you can view the
camera monitoring in real-time, adjust the resolution,
capture images, record video, and make 2-way talking.
• Infrared night vision:
The camera can automatically switch to night vision mode
(black&white) at night according to the degree of change
in surrounding light. With built-in red Infrared LED lights,
the night vision distance can reach 10 meters, and it can
be viewed super clearly in the dark.
• Motion detection:
The camera can detect the movement changes in the
camera's view, and push the notification of the movement
changes to the APP.
Set from: APP >> Device (tap device to live video page)
>> Settings >> Alert Settings >> Motion Detection.
Basic Parameter
Product name
Image sensor
Angle of view
Security
Working temp
Local storage
O2
1/2.8'' 3MP CMOS
110°
AES-128
−20 °C to 50 °C
Micro SD card
(up to 128GB)
Size
Resolution
Power
Waterproof
Supported
phone OS
Wireless
connection
137x65x75mm
2304(H)*1296(V)
DC 5V, 1A
IP65
iOS 9 / Android 5.0
and above version
IEEE802.11b/g/n
2.4GHz
ENEN
EN
• How to disable the LED indicator/blue light with my
camera?
Arenti APP >> Device (tap device to live video page) >>
Settings >> Basic Function >>Network Indicator: Disable it.
• How to change WiFi or update WiFi password for device?
Please delete the camera on APP, tap "Add" follow the steps
to use the new WIFI network to add the camera again.
•How to share Arenti devices with friends and family?
Arenti APP >> Device (Tap device to live video page) >>
Settings >> Device Share >> Add, follow the guide to share
your device.
•Failed to access the Live video, prompts offline?
1. Please ensure the camera is in the power-on state: camera
network indicator will on.
2. Check the WiFi network is in good condition and restart
the router.
3. Try to move the camera near the router, and check again.
4. Delete the camera from Arenti APP ad add it again.
Confirm the APP and camera firmware are the latest
versions.
If there doesn't work please share the camera indicator
status and camera SN (Find on camera body) to
FAQ
Precautions
•The applicable working temperature of this product is -20
℃~50℃, please do not use it in an environment where the
temperature is too high or too low use this product.
• To use this product better, avoid the front and side of the
lens close to the glass, white walls, etc. light objects, so as
not to cause the picture to be bright near, dark, or whitish
in the distance.
EN
EN
After-Sale Service and Technical Support
• Please make sure that the camera is installed within the
range covered by Wi-Fi signal, and placed as far as
possible on the location where the signal is better, and try
to install it away from metal and microwave ovens that
may affect the signal.
• Access Support Articles, Videos, and Documentation.
www.arenti.com/support/
• Access Support from the Arenti App, Simply login your
Arenti App tap to get support.
the camera issue, inform us the camera model and SN
from the camera body. We will reply to you in 24h.
Legal notice
Symbols: Direct current (DC)
Don't throw batteries or out of order products with
the household waste (garbage). The dangerous
substances that they are likely to include may harm
health or the environment. Make your retailer take
back these products or use the selective collect of
garbage proposed by your city.
Hereby, Laxihub, declares the radio equipment type
'O2' is in compliance with the Directive 2014/53/EU
The full test of the EU declaration of conformity is
available at the Internet address: www.laxihub.com
EN
Description du produit
FR
1. Micro
2. Indicateur LED
3. Fente pour carte SD
4. Réinitialiser
5. Micro-USB
6. Haut-parleur
Bleu constant
Bleu clignotant lentement
Rouge clignotant lentement
Rouge clignotant rapidement
Connexion réussie
Mode de configuration manuelle
En attente de connexion
Réseau anormal
Indicateur de réseau :
Configurer la caméra
• Ce dont vous aurez besoin：
1. Wi-Fi et une connexion Internet haut débit fonctionnelle
avec une vitesse de téléchargement d'au moins 2 Mbps.
2. Un téléphone ou une tablette avec iOS 9/Android 5.0 ou
version ultérieure.
3. Une prise de courant.
4. Un tournevis Phillips ou une perceuse électrique avec
embout Phillips.
• Allumer
Branchez le câble d'alimentation dans le port d'alimentation
micro-USB à l'arrière de l'appareil photo, l'appareil photo
s'allumera automatiquement, attendez 30 secondes, le
voyant clignotera lentement en rouge, ce qui signifie que le
démarrage est terminé.
Veuillez lire attentivement ce manuel avant d'utiliser le
produit et conservez-le correctement. Les informations sur
l'étiquette se trouvent sur le côté de la caméra.
Indicateur LED :
Caméra, adaptateur secteur, câble d'alimentation, sac
d'accessoires de montage, guide rapide.
1
2
3
4
5
6
EN
FR
• Connectez l'application Arenti
Scannez le code QR pour télécharger et installer l'application
Arenti. Vous pouvez également rechercher "Arenti" sur App
Store (IOS) ou Play Store (Android). Téléchargez et installez
l'application Arenti. Ouvrez la page d'accueil de l'application,
cliquez sur "+" sur la page supérieure droite. Suivez le guide
sur l'APP pour ajouter la caméra étape par étape.
Une fois la connexion réussie, le voyant est bleu fixe.
Dépannage
• La caméra ne s'allume pas :
1. Essayez d'utiliser une autre prise.
2. Essayez d'utiliser un autre adaptateur/câble d'alimenta-
tion 5 V pour mettre sous tension.
• Impossible de scanner le code QR depuis l'application Arenti :
1. Retirez le film de l'objectif de la caméra.
2. Gardez une distance de 10 à 15 cm (4 à 6 pouces) entre
l'appareil photo et le téléphone portable.
3. Confirmez que le voyant de l'appareil photo est rouge et
clignote lentement.
• Échec de la connexion Wi-Fi :
1. Confirmez que la numérisation du code QR a réussi : après
la numérisation, l'appareil photo émet un son d'invite et
l'indicateur de réseau devient rouge clignotant rapidement.
2. Assurez-vous d'entrer le mot de passe WiFi correct, le mot
de passe WiFi que vous définissez ne contient pas de
caractères spéciaux tels que =\';.
3. Assurez-vous que la bande WiFi répond aux exigences du
réseau de la caméra qui ne prend en charge que 2,4 GHz.
4. Confirmez que la caméra se trouve à proximité du routeur WiFi.
Si cela ne fonctionne pas, veuillez partager la capture d'écran
des paramètres du routeur Wi-Fi et le SN de la caméra
(Recherché sur le corps de la caméra) à support@aren-
ti.com pour obtenir de l'aide.
Otros manuales para O2
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de laxihub
