Lava Octopus-550 Manual de usuario

LAVA Octopus-550

Installation Manual

Rev. C00

LAVA

COMPUT ERS

OCTOPUS PCI

P.N. MOKO L81.2

MADE

CANADA

MOKO S3/S4

FN16F-000

0837

RoHS

Windows NT 4.0 Installation

1. With the power turned off, insert the Octopus-550 card into any free

PCI slot in your PC. Boot NT logging on as“Administrator”.

2. Place the Octopus-550 Installation CD into your computer and

select Run from the Start Menu.When prompted type:

A:\NT4.0\Setup.

3. After the necessary files have been copied, select My Computer and

start Control Panel. A new icon will appear called“LavaPort.”This

applet should now be used to configure ALL Com Ports in your PC –

not just LAVA serial ports.

Please note that Com 1 may not appear in this applet if you have your

mouse attached to Com 1.

DOS & Windows 3.x Installation

1. With the power turned off, insert the Octopus-550 card into any free

PCI slot in your PC.Turn your PC on. Boot to DOS.

2. Place the Octopus-550 installation CD into your computer. In the

Win3.11 subdirectory of this CD you will find a file called

“Lavaconf.exe”. Copy this file to your hard drive and run it.

3. When run, Lavaconf.exe will display two sets of four I/O addresses

and one IRQ.These correspond to the addresses and IRQ chosen by

your PC when configuring the Octopus-550. Make a note of them.

4. If you are using Windows 3.x, start Windows and go to Control Panel

| Ports. Choose Com 3 for Port 1 and Com 4 for Port 2 on the

Octopus-550. Click the Advanced button and enter the I/O address

and IRQ for each port as reported by Lavaconf.exe. Reboot your PC

for these changes to take effect.

Note: Native DOS and Windows 3.X support a maximum of four Com

ports in a PC. If you wish to use four ports on the Octopus-550, you must

disable the existing ports on your motherboard. Users running DOS or

Windows 3.x exclusively on a system with an Octopus-550 will be

unable to access four of the card's ports, regardless of configuration.

1. With the power turned off, insert the Octopus-550 card into any

free PCI slot in your PC. Make sure the card is well seated. Attach

the cable.Turn your PC on and start Windows.

2. Windows will automatically detect the Octopus-550 as a new PCI

Serial Controller and ask you to insert the Installation CD.The

installation files are located in the root directory of this CD.

Windows XP/Vista/7 may display a message to the effect that the

drivers are not digitally signed.This warning can be ignored.

3. After the necessary files have been copied,Windows will

complete the full installation of the Octopus-550. During this

process, two Octopus-550 parents will be created in Device

Manager under Multi-Function Adapters, and eight child ports

will be created under Control Panel | System | Device Manager |

Ports.

Windows 95/98/Me/2000/

Vista/Win 7 Installation

The hardware appears in Device Manager in two

places: under the Multi-function Adapters tree and as part of the

Ports tree. Please note that any changes to the Resources (I/O

Address & IRQ) used by any one of the eight ports on the Octopus-

550 must be made through the Resources page of the appropriate

Octopus-550 PARENT – not through the individual Ports pages.

Modifying I/O Address and IRQ Resources is NOT

recommended.

Octopus-550

Changing the Com numbering of your

Octopus-550 ports (Windows 95/98/Me

only)

Unless you already have more than 4 Com ports installed in your

PC,Windows will by default configure the Octopus-550 ports as

Com 5 through Com 12.To change the Com number of any of

these ports (e.g. reassign Com 5 to be Com 3), please use the Lava

Com Port Redirect Utility included in the “Utils\Redirect“

subdirectory of your Installation CD. Such a reassignment may be

necessary because some communications applications programs

do not recognize port designations beyond Com 4.The Com Port

Redirect utility will allow you to change the Com numbering of

your ports without changing I/O address resources.

To install the Port Redirect Utility on your hard drive, insert the

Installation CD into your computer, click Start, Run and type

A:\Utils\Redirect\Setup.

Changing the Com numbering of your Octopus-

550 ports (Windows 2000/XP/Vista/Win 7 only)

In Windows 2000 and later, Com port numbering can be changed by

double-clicking the serial port entry displayed in Windows' Device

Manager. Go to Port Settings | Advanced, and choose Com Port #.

LAVA Computer MFG Inc.

LAVA

Technical Support

9:00 am to 5:30 pm Monday to Friday (Eastern Time)

Tel: +416 674-5942

Fax: + 416 674-8262

E-mail: tech@lavalink.com

Internet: www.lavalink.com

This device complies with part 15 of the FCC Rules.Operation is subject

to the following conditions:(1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Tabla de contenidos

Otros manuales de Tarjeta PCI de Lava

Lava

Lava Parallel-PCI DB-25 Manual de usuario

Lava

Lava Lava Parallel LAVA SP-PCIe Manual de usuario

Lava

Lava 16550 UARTs Manual de usuario

Lava

Lava 2SP-PCI Manual de usuario

Lava

Lava LAVA SSerial-PCIe Manual de usuario

Lava

Lava Dual Parallel-PCI Manual de usuario

Lava

Lava LAVA Dual Parallel-PCI Manual de usuario

Lava

Lava SP-PCI Manual de usuario

Lava

Lava Enhanced Parallel Port Board Manual de usuario

Lava

Lava LavaPort-Quad Manual de usuario

Lava

Lava Dual Parallel-PCI Manual de usuario

Lava

Lava Lava Parallel LAVA SSerial-PCIe/LP Manual de usuario

Lava

Lava DSerial-PCI Powered Manual de usuario

Lava

Lava Lava Port 650 Manual de usuario

Lava

Lava LAVA SP-PCI Manual de usuario

Lava

Lava FireHost Manual de usuario

Lava

Lava Parallel-PCIe Manual de usuario

Lava

Lava LAVA SSerial-PCI/LP Manual de usuario

Lava

Lava Parallel-PCI/LP Card Manual de usuario

Lava

Lava SSerial-PCI/LP Manual de usuario

Lava

Lava QUATTRO-PCI 3.3V Manual de usuario

Lava

Lava Quattro-PCI/LP Manual de usuario

Lava

Lava Lava 2SP-PCI Manual de usuario

Lava

Lava QUATTRO-PCI Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario