Lathem 100E Manual de usuario

ENGLISH

Model 100E

User’s Guide

WARNING

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his or her own expense.

Caution: Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

This digital apparatus does not exceed the class A limits for radio noise

emissions from digital apparatus as set out in the radio interference regulations

of the canadian department of communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant

les limites applicables aux appareils numériques de classe A prescrites dans le

règlement sur le brouillage radioélectrique édicté par le ministère des

communications du canada.

Lathem Time Corporation

www. lathem. com

(800) 241-4990

1. INTRODUCTION & FEATURES1. INTRODUCTION & FEATURES

• Quartz time clock

• Dot matrix printer

• Perpetual calendar

• Automatic daylight saving time

• Automatic print activation

• Prints in 4 languages

• 12 or 24-hour format

• Regular minute, 1/10 or 1/100 of an hour

• 2 or 4-digit year imprint

• 13 preprogramed comments

• Digital LCD display (Date, Hour,

Minute, Day of the week indication)

• Adjustable print position

•

ENGLISH

INTRODUCTION

Features

Main applications: Payroll/job cost recorder or time stamp

ENGLISH

READ THIS FIRST

CAUTION

Avoid placing the unit in environments that are:

• humid or dusty.

• exposed to direct sunshine.

• subject to frequent or continuous vibrations.

• outside the temperature range between -5˚C and 45˚C (+23˚F and 113˚F).

• affected by chemicals or ozone.

Place the time clock close to the wall outlet so that it is easily accessible to disconnect.

Do not put a heavy object on the clock, or not forcefully press the cover of the clock. It may cause

mechanism trouble and danger especially when the unit is hung on the wall.

Lithium battery contains perchlorate material - special handling may apply.

Please go to web site http://www.dtsc.ca.gov/hazardouswaste/perchlorate for information about proper

methods of disposal.

Only use the AC adapter supplied with the unit. Using a different AC adapter may cause

electrical shock or fire, or damage the unit. Do not use the AC adapter with any other unit.

ACCESSORIES

• VIS6011 - Ribbon Cartridge (Black)

• VIS6008 - Ribbon Cartridge (Purple)

• VIS6007 - Ribbon Cartridge (Red)

• 25-9EX - Time Card Rack, 9" Cards, 25 Pockets, Expanding

For questions about the operation of this time clock, or to order supplies and accessories, please

contact Lathem Time at (800)241-4990 or visit www.lathem.com.

PACKAGE CONTENTS

Wall-mount fittings

Screws (2 pcs.)

Ribbon cassette

(installed at

the factory)

Key

User's manual

Cover

Display

Key hole

CONTENTS

In addition to the 100E and AC adapter:

OVERVIEW

(Cover off)

(Back view)

(Front view)

Wall-mount holes

(Upper side)

AC adapter

Display

Program modes Ribbon cassette

Print head

Control buttons

AC outlet

QUICK EASY SETUP

NOTICE: Remove the PROTECTION INSERT before you plug the AC adapter into the AC outlet.

To setup your time clock, follow next steps:

Step 1

Unlock and remove the cover. Remove the PROTECTION INSERT, and

plug the AC adapter into the time clock.

Plug the AC adapter into the AC outlet

and program the clock.

Replace the cover, lock and insert a time

card.

Step 2

Step 4Step 3

Protection Insert

First

Second

Card

AC outlet

QUICK EASY SETUP

NOTICE: Remove the PROTECTION INSERT before you plug the AC adapter into the AC outlet.

To setup your time clock, follow next steps:

Step 1

Unlock and remove the cover. Remove the PROTECTION INSERT, and

plug the AC adapter into the time clock.

Plug the AC adapter into the AC outlet

and program the clock.

Replace the cover, lock and insert a time

card.

Step 2

Step 4Step 3

Protection Insert

First

Second

Card

Install the supplied wall-mount screws

into a wall by using the template located

on the inside back cover.

Be sure to keep about 6 mm of the screw

head away from the wall.

Step 1

Unlock the key and remove the cover.

And then hang it on the wall.

Step 2

Replace the cover and lock.

Step 3

WALL MOUNTING

Caution: The supplied screws are intended for use on a thick wooden wall or wooden column.

Do not use them on any other materials. The time clock may come off if used on other materials.

WALL

(Upper side)

To enter the program setting mode, you should plug the AC adapter into the AC outlet and

remove the cover. Thereafter press the SELECT button once. Then the clock goes into the

program mode showing the " " on the display positioned at the "TIME".

Function of 3 control buttons

SELECT : You can select the desired program setting mode by pressing this SELECT button.

Selected program setting mode is indicated by the " " mark on the display.

CHANGE : When you press the CHANGE button, you can increment the set value.

SET : You can set the value selected on the display by pressing the SET button. Thereafter you

press this SET button again, you can return the clock to the normal operation mode.

HOW TO PROGRAM THE CLOCK

Program modes

Control buttons

FACTORY SETTINGS

Item

Time

Date

Display Hours Format

Print Order

Print Year Digits

Print Hours

Print Minutes

Print Leading Zero

Print Comment

Print Language

Print Direction

*Daylight Saving Time

*Start

*Daylight Saving Time

*End

Password

Default Settings

Current Eastern Time

Current Date

12 Hour (AM/PM)

Month, Date, Hours,

Minutes

2 (YY)

12 Hour

0-60

Disabled

RCVD (if set in Print Order)

English

Right

2nd Sunday in March

1st Sunday in November

Disabled (0000)

Options

Change Time

Change Date

24 Hour

18 Formats Available

4 Digit (YYYY)

24 Hour

1/10, 1/100 of an hour

Enabled

13 Comments Available

French, Spanish, Portuguese

Left

Change Start, Disable

Change End, Disable

Enable

Page

IMPORTANT

This unit has been preset to perform automatic Daylight Saving Time (DST) changes. If your

location does not observe DST changes YOU MUST DISABLE DST CORRECTION before

use. (See page 22 for detailed instructions).*

SET PRINT POSITION ON TIME CARD

The print position from the card edge is adjustable by pressing and sliding the print position

button located on the right outside bottom of the recorder.

ADJUST PRINT POSITION

JAN 31AM12:00

JAN31A

15mm

30mm

Print position adjuster

Located on the bottom

of the 100E.

The print position from the card edge is

adjustable by pressing and sliding the

print position button on outside bottom.

Tabla de contenidos

Otros manuales de Reloj de Lathem

Lathem

Lathem 900E Manual de usuario

Lathem

Lathem 2000 Manual de usuario

Lathem

Lathem TruAlign 800P Manual de operación

Lathem

Lathem 1000E Manual de usuario

Lathem

Lathem DDC2-RS Manual de operación

Lathem

Lathem LTR-512 Instrucciones de montaje

Lathem

Lathem 900E Manual de usuario

Lathem

Lathem 700E Manual de usuario

Lathem

Lathem 2000 Manual de usuario

Lathem

Lathem 1000E Manual de usuario

Lathem

Lathem 2000 - 4000 Series Manual de usuario

Lathem

Lathem DDC2 Series Manual de usuario

Lathem

Lathem 2121 Manual de usuario

Lathem

Lathem 1200 Series Manual de usuario

Lathem

Lathem PC700 Manual de usuario

Lathem

Lathem DWA-4000 Manual de usuario

Lathem

Lathem Airtime AT-DDC4 Manual de operación

Lathem

Lathem 4000 Series Manual de usuario

Lathem

Lathem DWA Series Manual de funcionamiento

Lathem

Lathem Airtime AT-DDC4 Manual de operación

Lathem

Lathem LTR4-512 Manual de operación

Lathem

Lathem 1600E Manual de usuario

Lathem

Lathem LTR4-512 Manual de usuario

Lathem

Lathem Airtime AT-DDC4 Manual de operación

Manuales populares de Reloj de otras marcas

Silicon Laboratories

Silicon Laboratories SI5324 Manual de usuario

Heathkit

Heathkit GC-1005 Manual de usuario

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manual de usuario

Andrew O'Malley

Andrew O'Malley DOTKLOK Manual de usuario

ALGE-Timing

ALGE-Timing ASC3 Manual de usuario

Bodet

Bodet Profil 960 Manual de usuario

Nixie Clock

Nixie Clock Divergence Meter Manual de usuario

La Crosse Technology

La Crosse Technology WS-8256-AL Manual de usuario

Mini Gadgets

Mini Gadgets MCPro Manual de usuario

Casio

Casio TMR-200 Manual de usuario

Progetti

Progetti ILTEMPOSTRINGE Manual

BVItech

BVItech BV-101 Manual de usuario

Progetti

Progetti KALIMERO Manual

La Crosse Technology

La Crosse Technology WT-3141b Manual

La Crosse Technology

La Crosse Technology W86531 Manual de usuario

Sharp

Sharp SPC900 Manual de usuario

La Crosse Technology

La Crosse Technology 404-50447 Manual de usuario

Datexx

Datexx DF0063 Manual de usuario