Laserworld CS-2000RGB Manual de usuario

Manual / Bedienungsanleitung

Club Series

CS-1000RGB / CS-1000RGB SE

CS-2000RGB / CS-2000RGB SE

CS-4000RGB / CS-4000RGB SE

Please spend a few minutes to read this manual fully

before operating this laser!

Bitte lesen Sie diese Bedienungsanleitung sorgfältig

vor Inbetriebnahme dieses Showlasersystems!

03/2014

English

Deutsch

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 2 / 22

Rechtlicher Hinweis:

Die Firma Laserworld AG behält sich das

Recht vor, Änderungen an ihren Produkten

vorzunehmen, die der technischen Weiter-

entwicklung dienen. Diese Änderungen wer-

den nicht notwendigerweise in jedem Einzel-

fall dokumentiert.

Diese Betriebsanleitung und die darin ent-

haltenen Informationen wurden mit der ge-

botenen Sorgfalt zusammengestellt. Die Fir-

ma Laserworld AG übernimmt jedoch keine

Gewähr für Druckfehler, andere Fehler oder

daraus entstehende Schäden.

Die in dieser Bedienungsanleitung genann-

ten Marken und Produktnamen sind Waren-

zeichen oder eingetrageneWarenzeichen der

jeweiligen Titelhalter.

Legal notice:

Thank you for purchasing this Laserworld

product. Due to continual product develop-

ments and technical improvements, Laser-

world (Switzerland) AG reserves the right to

make modications to its products.

This manual and its content have been made

with due care but Laserworld (Switzerland)

AG cannot however, take any responsibility

for any errors, omissions or any resulting da-

mages forthwith.

The brands and product names mentioned

in this manual are trade marks or registered

trade marks of their respective owners.

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 3 / 22

Content:

1. Product and package contents

2. Preliminary warning notices

3. Initial operations, safety instructions

4. Working on the device

5. Service notes

6. Warnings and other notices on the device

7. Device connections

8. Operation

Final statement

Technical data sheet

Laser specications

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 4 / 22

1. Product and package contents

Please check if all listed parts are included and undamaged. Included in delivery:

1 x laser projector 1 x Interlock adapter

1 x power cable / power con (CS-4000RGB) 2 x key (for key switch)

1 x manual

3. Initial operations, safety instructions

1. Make sure to use correct voltage; see in-

formation on device & in this manual.

2. Make sure that the device is not connec-

ted to mains during installation.

3. Installation has to be done by technical

experienced and qualied persons ac-

cording to safety regulations of the res-

pective country.

4. Always ensure that maximum permis-

sible exposure (MPE) is not exceeded

in areas accessible to the public or

members of sta.

5. In some countries an additional ins-

pection by technical control institutes

could be necessary.

6. Connect an easily accessible inter-

lock connector or circuit breaker

to the projector.

7. The power supply should be easily acces-

sible.

8. When installing the laser mount it with

a minimum distance of 15 cm from walls

and objects.

9. For safe setup e.g. on walls or ceilings

please use a safety cord. The safety cord

should be able to withstand tenfold the

weight of the device. Please follow the

accident prevention regulations of pro-

fessional associations and/or comparable

regulations for accident prevention.

2. Preliminary warning notices

1. Please use this device only according to these operating instructions.

2. Do not use the device if there are any visible damages on housing, connector panels,

power supplies or power cords.

3. Never look directly into the light source of a laser projector. Danger of damage to the

eyes or even blindness in extreme circumstances!

4. Do not operate the device at high humidity, in the rain or in dusty environments.

5. Protect device against dripping or splashing water. Do not place any liquid lled

containers near to this device.

Any warranty claims are void if the warranty label is removed or tampered

with in any way.

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 5 / 22

10. If the device has been exposed to great

temperature changes, do not switch it

on immediately. Condensation (or any

moisture/water formed) may damage

device.

11. Never use dimmer, RC or other electroni-

cally switched sockets. Whenever possib-

le, do not use the laser projector together

with large appliances (especially fog ma-

chines) on the same mains!

12. Ensure sucient ventilation and do not

place the device on any warm or heat ra-

diating surface. Especially the ventilati-

on openings must not be covered!

13. Ensure that device does not get over-

heated. Make sure that the device is not

exposed to spotlights (especially moving

heads). Heat of spotlights could overheat

laser in a little while and leads to a degra-

dation of performance.

4. Working on the device

1. This product has no user serviceable parts inside and should

only be maintained and serviced by a qualied engineer.

2. Be sure that the mains plug is not connected to the power

supply while installing or opening the device (e.g. for

cleaning).

3. Take o all reecting things like rings, watches etc. befo-

re starting to work with or at the projector.

4. Only use non-reecting tools to work on device.

5. Wear protective clothing (like goggles, gloves etc.) according to laser power and wave-

length of the laser.

5. Service notes

• Moisture and heat can reduce lifetime of

the laser system dramatically and expires

any warranty claim.

• Quick on/o switching of this device will

reduce durability of the laser diode dra-

matically.

• Avoid sharp knocks and shocks to this

device and ensure sucient protection

during transportation. Look after your La-

serworld product.

• To increase durability of your laser,

protect device against overheating:

-Always ensure sucient ventilation.

-Do not face spotlights (especially mo-

ving heads) to the device.

-Check temperature after approx. 30

minutes with each new installation.

If necessary install the projector at a

place with dierent temperature.

-Keep the device dry. Protect it from

moisture, rain and damp.

-Switch o device when it is not nee-

ded. Diodes are switched on and can

wear out even if there is no visible la-

ser output.

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 6 / 22

• Open the device at regular intervals and

remove any dust, particularly around fans

and laser. Otherwise the risk of overhe-

ating is imminent and will void the war-

ranty.

• If there are traces of fog uid in the pro-

jector, clean it and change the position of

the fog machine.

• The devices of Ecoline, Evolution, Club

and Proline Series are not meant for pro-

fessional applications. After approx. one

hour of operation, the device should cool

down for about 15 minutes.

• As for troubleshooting, please check the

FAQ on our website www.laserworld.com

• Removal of the warranty label as well

as damages to the device caused by

improper handling, neglect of the sa-

fety instructions and service notes will

void the warranty.

6. Warnings and other notices on the device

Laser radiation!

Avoid exposure

to beam.

Laser class 4

Caution of

radiation if cover

is removed Power supply

& consumption

Model type

Wavelength

Output power

Production

year

Please read manual before operation

Use in enclosed spaces only!

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 7 / 22

connection

for power supply

DMX address

DMX outDMX in

ILDA in

switch

Interlockkey switch

microphone

LED signals

ILDA out

trim pot for

sensitivity control

7. Device connections

CS-1000RGB (SE) / CS-2000RGB (SE)

power con in

power con out

DMX address

DMX out DMX in

ILDA in

switch

fan fan

Interlock

key switch

microphone

LED signals

ILDA out

trim pot for sensitivity control

CS-4000RGB (SE)

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 8 / 22

8. Operation

1. Connect the power cable / power con to the device and then to the mains

2. Insert key and turn it‚ON‘

3. 3. Press„ON“ to switch the device on

4. 4. Please make sure, that the Interlock adapter is inserted

5. Your device runs in auto mode:

6. Your device runs in music mode:

Control the music-sensitivity by the trim pot at the rear side of the device. The LED is

ashing when the device is triggered.

7. Your device runs in DMX mode if ‘10‘ is switched o:

Connect a DMX controller to operate the laser.

Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-

ber. To dene a number use the preceding number and multiply it by 2:

The laser uses 13 DMX channels, so make sure that the next device uses an address that

doesn’t overlap with this range.

Switch 12345678910

Number 1 2 4 8 16 32 64 128 256 Mode Switch

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 9 / 22

Channel Value Function

1 0-63 Laser o

64-127 sound mode

128-191 automatic mode

192-255 DMX mode

2 0 - 255 Patterns

3 0 - 255 Eect channel: Strobe

Horizontal movement

4 0 no eect

1-167 (xed) movement

168-188 animated left to right with increasing speed

189-209 dto. right to left

210-255 dto. left to right and back.

5 0 - 255 vertical movement: analogous to horizontal

movement

Zoom

6 0-10 no eect

11-104 increasing size

105-154 growing with increasing speed

155-204 dto. shrinking

205-255 dto. growing/shrinking

Width (rotation over Y)

7 0-150 xed rotation

151-255 automatic rotation with increased speed

8 0 - 255 Height (rotation over X): analogous to width

Rotation

9 0-180 xed rotation

181-217 automatic with increased speed clockwise

218-255 do. counter clockwise

Manual: Club Series CS-1000RGB / CS-1000RGB SE / CS-2000RGB / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE

page 10 / 22

Please note that not each pattern can be combined with each eect.

8. ILDA control:

Connect your device („ILDA IN“) via an ILDA cable to an interface / controller. Use a laser

control software, e.g. Phoenix or Pangolin, to run the device. Use „ILDA OUT“ to connect

it to another device.

9. To turn o the device switch it o („OFF“), switch the key to„OFF“ and disconnect the

power cable /powle con from the mains.

Channel Value Function

Blanking

10 0-70 no eect

71-139 points are brighter

140-209 dashed lines

210-255 points only

11 0 - 255 Wave

12 0 - 255 Colour: 0 - 19 white; etc. 6 colours 139-164 rain-

bow static; 164-248 rainbow moving; 249-255

colour change

13 0 - 255 image format

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de iluminación de Laserworld

Laserworld

Laserworld BLUE-300-473 Manual de usuario

Laserworld

Laserworld RTI-Piko Series Manual de usuario

Laserworld

Laserworld CS-150G Manual de usuario

Laserworld

Laserworld Evolution ES-800S RGB 3D Manual de usuario

Laserworld

Laserworld GREEN-150 Manual de usuario

Laserworld

Laserworld LED-54 Manual de usuario

Laserworld

Laserworld HIGH PRO-OEM Manual de usuario

Laserworld

Laserworld SwissLas Purelight PL-8000G compact Manual de usuario

Laserworld

Laserworld EL-200 RGY Manual de usuario

Laserworld

Laserworld Garden Series Manual de usuario

Laserworld

Laserworld EL-60 G Manual de usuario

Laserworld

Laserworld LW25K Manual de usuario

Laserworld

Laserworld GREEN-2000 Manual de usuario

Laserworld

Laserworld EL-60 G Manual de usuario

Laserworld

Laserworld GREEN-8000 Manual de usuario

Laserworld

Laserworld BLUE-400-445 Manual de usuario

Laserworld

Laserworld LW-50k Manual de usuario

Laserworld

Laserworld GREEN-10000 Manual de usuario

Laserworld

Laserworld Evolution Series ES-800S RGB 3D Instrucciones de montaje

Laserworld

Laserworld Pro-3500RGB Manual de usuario

Laserworld

Laserworld PL-16.000RGB Manual de usuario

Laserworld

Laserworld Proline Series Manual de usuario

Laserworld

Laserworld EL 200 LED Manual de usuario

Laserworld

Laserworld PL-4000RGB Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario

Silvair

Silvair MESH-CEDRP Manual de usuario