Laser PJT-BYCBL-040 Manual de usuario
Laser Backyard Cinema Bundle
PJT-BYCBL-040
User Manual
WHAT’S IN THE BOX
• Inatable screen with built-in blower
• Detachable white movie screen
• Carry Bag
• 6 x tie down ropes
• 6 x tether stakes
• Projector
• Remote
• AC Power Adapter
• Lens cover
• Mini Bluetooth Soundbar
• USB-A to USB-C cable (for power)
SELF-INFLATABLE SCREEN
PROJECTOR
SOUNDBAR
WHAT’S IN THE BOX
LASER BACKYARD
CINEMA BUNDLE
Additional items you may need for
setting up:
1. 2x AAA batteries for the projector
remote control
2. Power extension cord with double
adaptor
3. HDMI cable
4. 3RCA to 3.5mm AV cable (optional to
connect with devices without an HDMI
output)
LASER BACKYARD
CINEMA BUNDLE
For best use, please note the following:
When setting up the screen and projector
outdoors, please be aware of wind
conditions and obstructions. The projector
works best in dark conditions, so other light
sources from street lighting, backyard lights,
and mobile devices may impact the clarity
of the projected image. For an optimal
viewing experience, we recommend a
120-inch image or less, with the projector
placed 3.6 metres from the screen.
A 144-inch screen is possible, however the
projector would need to be 4.4 metres from
the screen, meaning brightness and image
quality may be compromised.
continued...
LASER BACKYARD
CINEMA BUNDLE continued...
LASER BACKYARD
CINEMA BUNDLE
SETTING UP
1. Select an area large enough to erect the
projector screen.
2. Unpack the projector frame and lay it
out on the ground with the front of the
screen facing upwards, and without
blocking the air pump.
continued...
LASER BACKYARD
CINEMA BUNDLE
3. Attach the white movie screen to the
frame.
4. Connect the air pump to power and
inate the screen.
5. Secure the inated screen to the ground
using supplied stakes and ropes.
6. Unpack the projector and connect it
to power. Use the rst illustration on the
previous page as a guide to position the
projector.
7. Reposition the projector to get the best
image on the screen. You can use Focus
and Keystone rotators on the projector to
help you.
continued...
LASER BACKYARD
CINEMA BUNDLE continued...
LASER BACKYARD
CINEMA BUNDLE
9. Connect the mini soundbar to power
using the supplied USB-A to USB-C
power cable. We recommend that you
use a 5V, 1A USB adaptor, however you
can use the USB port on the projector
as well.
10. Turn on the speaker. Bluetooth mode
is the default mode on the speaker. If not,
press and hold the Mode button to switch
to Bluetooth mode.
11. Turn on Bluetooth on the projector by
going to Menu > Option > Bluetooth. Wait
for a list of nearby BT devices to appear.
Select, PJT-BYCBL-040-C and click OK
to connect. Audio played on the
projector can now be heard through the
mini soundbar.
continued...
SELF-INFLATABLE SCREEN
PRODUCT CARE
• Before using and reusing, inspect the
product carefully.
• Do not mount or place near gas or
electric heaters, replaces, candles, or
other similar sources of heat.
• Unplug the product when not in use.
Store neatly in a cool, dry location
protected from sunlight.
• Do not place it where small children
can reach it.
• Do not hang ornaments or other
objects from hooks and ropes.
SELF-INFLATABLE SCREEN
continued...
• Protect the electric fan and power
cord from direct exposure to water.
This precaution will reduce the risk of
electrical shock.
• When the temperature is below 10°F
(-14°C), the motor may temporarily stop
running. The motor will begin functioning
again in higher temperatures.
• Do not attempt to inate the item
during unusually strong winds. If it
becomes too windy for safe operation,
simply allow the item to deate and wait
for better conditions before re-inating.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
SELF-INFLATABLE SCREEN
continued...
supervision or instruction concerning use
of the appliance by a person responsible
for their safety. Children should be
supervised to ensure that they do not
play with the appliance.
• If the power cord is damaged, it must
be replaced by the manufacturer, its
service agent, or similarly qualied
persons in order to avoid a hazard.
Otros manuales para PJT-BYCBL-040
1
Tabla de contenidos
Otros manuales de Oradores de Laser
Laser
Laser SPK-BT540LED Manual del propietario
Laser
Laser SPK-LED690BLK Manual de usuario
Laser
Laser SPK-BT550LED Manual del propietario
Laser
Laser SPK-BTCLD Manual de usuario
Laser
Laser AO-BT620S-BLK Manual del propietario
Laser
Laser SPK-T360 Manual de usuario
Laser
Laser SPK-BTWP Manual de usuario
Laser
Laser SPK-BTLPP Manual de usuario
Laser
Laser SPK-F228 Manual de usuario
Laser
Laser SPK-BT313 Manual de usuario
Laser
Laser SPK-BT15 Manual de usuario
Laser
Laser PAD-A4 Manual de instrucciones
Laser
Laser SPK-BTSTP Manual de usuario
Laser
Laser SPK-BT520 Manual del propietario
Laser
Laser SPK-BT510OD Manual del propietario
Laser
Laser SPK-BTRB Manual de usuario
Laser
Laser SPK-WFQ10 Manual del propietario
Laser
Laser SPK-BT660 Guía del usuario
Laser
Laser SPK-F200 Manual de instrucciones
Laser
Laser Soundtec Party Blaster Manual de usuario
