Laser Technology IMPULSE LR Manual de usuario

IMPULSE

IMPULSE LR

Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

LIMITEDWARRANTY

Laser Technology, Inc. (LTI) warrants the Impulse to be in good working order for a period of one year from the date

of purchase from LTI or an authorized LTI product dealer. Should the product fail to be in good working order at any

time during the warranty period, LTI will, at its option, repair or replace the product at no additional charge, except as

set forth below. Repair parts and replacement parts and products become the property of LTI. This limited warranty

does not include service or repair of damage to the product resulting from accident, disaster, misuse, abuse, or non-

LTI modification of the product.

To activate your warranty, return the warranty card from the front of this manual to LTI within 30 days of purchase. To

obtain limited warranty service, deliver the product during the one-year period to the Laser Technology Service

Center and provide proof of the purchase date. If the product is delivered by mail, you agree to insure the product or

assume the risk of loss or damage in transit, and to prepay the shipping container or equivalent.

LTI hereby disclaims all other express and implied warranties for the product, including warranties of merchantability

and fitness for a particular purpose. (Some states do not allow the exclusion of implied warranties, so the above

limitation may not apply to you.)

Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

LIMITEDWARRANTY

If the product is not in good working order as warranted above, your sole remedy shall be repair

or replacement as provided above. In no event will LTI be liable to you for any damages,

including any lost profits, lost savings, or other incidental or consequential damages arising from

the use or inability to use such product. Furthermore, LTI shall not be held responsible if any LTI

authorized dealer has been advised of the possibility of such damages, or for any claim by any

other party.

Note: The Warranty Validation Card (at the front of this manual) must be

completed and activated in order to benefit from this warranty. No

exceptions.

In the unlikely event that your new LTI laser should require warranty or repair service, call us to

receive a Return Merchandise Authorization (RMA) number before returning your product.

Laser Technology Phone: 303-649-1000

7070 South Tucson Way Fax: 303-649-9710

Englewood, CO80112 USA Web Site: www.lasertech.com

Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

PRECAUTIONS

Avoid staring directly at the laser beam for prolonged periods of time.

The Impulse is designed to meet stringent F.D.A. eye safety requirements and is classified as eye-safe to Class 1

limits, which means that virtually no hazard is associated with directly viewing the laser output under normal

conditions. As with any laser device, however, it is recommended that you avoid staring into the transmit aperture for

prolonged periods while firing the laser.

Never attempt to view the sun through the scope.

Looking at sun through the scope may permanently damage your eyes.

Never point the instrument directly at the sun.

Exposing the lens system to direct sunlight, even for a brief

period, may permanently damage the laser transmitter.

Do not expose the instrument to extreme temperatures.

Impulse components are rated for a temperature range of -30°C (-22°F) to +60°C (+140°F). Do not expose the

instrument to temperatures outside of that range.

Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

FOREWORD

The Laser Technology, Inc. Impulse is a light-weight, hand-held laser ranging instrument that allows you to quickly

and conveniently measure distances, heights, and vertical angles. The Impulse uses sensors to measure distances

and vertical angles, and menu-driven software to convert sensor readings to meaningful measurements.

The Impulse can be held easily in one hand and features simple three-finger operation: you execute most primary

operations simply by sighting your target through the scope and briefly pressing one of three buttons conveniently

located at your fingertips.

This manual covers the options, characteristics, and operation of these Impulse models: Impulse 200, Impulse

200LR, Impulse 100, and Impulse 100LR. Your particular Impulse may not have all the options described.

The Impulse 100 and 100LR take The Impulse 200 and 200LR take

these measurements: these measurements:

- Slope Distance - Slope Distance

- Cumulative and Difference Distance - Horizontal distance

- Vertical Distance

-Height

- Inclination

- Cumulative and difference distance

The LR (“long range”) models function identically to a standard Impulse, but provide

longer ranging capability to non-cooperative targets.

TABLEOF CONTENTS

Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

GETTING STARTED QUICKLY................ 1

BASICIMPULSE PACKAGE

................................. 1

ACCESSORIES..................................................... 1

INSERTINGTHEBATTERIES

............................... 2

POWERINGON AND OFF.................................... 3

TAKING A MEASUREMENT ................................ 4

THE ANATOMYOF THE IMPULSE ......... 6

SENSORS

............................................................ 6

SIGHTINGSCOPE................................................ 7

FRONT AND BACK PANELS

................................ 7

INSTRUMENT OPTIONS AND

INDICATORS ................................................. 8

MEASUREMENT MODES

.................................... 9

MEASUREMENT MODIFIERS

............................ 10

INDICATORS / WARNINGS................................ 11

SETTINGS/ OPTIONS........................................ 12

ERROR CONDITIONS

........................................ 14

USING THE BUTTON PANELS ................ 15

SETTING UP FOR LEFT-HANDED

OPERATION................................................. 18

SWITCHINGTHEHAND STRAP......................... 18

RECONFIGURINGTHE BUTTON PANELS

.......... 19

TAKING A BASIC MEASUREMENT .......20

UNGROUPING SENSORS - IMPULSE200............22

SETTINGTHESCOPEDOT INTENSITY...............23

SETTINGTHEMEASUREMENTUNITS

...............23

PERCENT SLOPE

...............................................24

RANGE RESOLUTION........................................24

POWER CONSERVATION INTERVALS................24

TURNING THE BEEPER ON AND OFF.................26

TAKING A HEIGHTMEASUREMENT ...27

HEIGHTPIVOT OFFSET.....................................30

ADDITIONAL NOTES.........................................32

Calculating a Pivot Offset ...........................33

TAKING A MULTIPLE

MEASUREMENT..........................................34

DIFFERENCE MEASUREMENTS

.........................34

CUMULATIVE MEASUREMENTS

.......................36

TARGETING .................................................39

LISTENINGTOTHEINSTRUMENT......................40

AIMING POINT

..................................................41

SETTINGTHERANGEOFFSET...........................42

SETTINGA GATE WINDOW

..............................43

Turning On the Gates..................................44

TABLEOF CONTENTS

Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

Setting a Short Gate Value.......................... 45

Setting a Long Gate Value .......................... 45

Clearing Gate Values.................................. 45

USINGTHE FILTER OPTION.............................. 46

NOTES ON MEASUREMENT MODIFIERS........... 47

THE EDIT MODE ........................................ 49

DOWNLOADING DATA............................. 51

DOWNLOADING

............................................... 51

THE DNLD OPTION......................................... 52

DISCARDINGERRORMESSAGES

...................... 54

OPTIONAL REMOTE TRIGGER.......................... 54

SERIAL INTERFACESPECIFICATIONS............... 55

IMPULSE (IP200 OR IP100) FORMAT............... 55

Queries........................................................ 55

Download Messages................................... 56

CR400 FORMAT............................................... 57

NMEA Compliance..................................... 57

Queries........................................................ 58

Download Messages................................... 59

SPECIFIC MESSAGE FORMATS

......................... 60

Version ID................................................... 61

Basic Measurement &HorizontalVector... 62

Range Difference.........................................64

Range Cumulative........................................65

Height ..........................................................66

USING A TRIPOD OR MONOPOD...........67

YOKE................................................................67

YOKE MOUNT

..................................................68

COMPASS MOUNT

............................................70

COMPASS..........................................................70

NOTE FOR CRITERIONUSERS...........................71

CARE AND MAINTENANCE.....................72

OPERATINGTEMPERATURE

.............................72

MOISTURE AND DUSTPROTECTION.................72

SHOCK PROTECTION.........................................72

CLEANINGAND STORAGE

................................72

CARING FORTHESCOPE...................................73

CHECKINGTHE DISPLAYSCREEN

....................73

CHECKINGTHE BATTERIES

..............................74

REALIGNING THESCOPE

..................................74

ALIGNING THETILT SENSOR - IMPULSE 200....76

SPECIFICATIONS........................................80

GETTINGSTARTEDQUICKLY

Page 1Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

When you receive your Impulse laser instrument,

check to see that you have received everything you

ordered and that it all arrived undamaged.

Basic Impulse Package

• Impulse laser instrument

• Belt clip

• Hand strap

• Two AA batteries

• User’s manual

• Padded carrying case

Accessories

In addition, you may have ordered one or more of

these optional accessories:

• Tripod yoke and mount

• Compass and mount

• Monopod

• Two Impulse download cables:

-Turck4-pin to DB 9-pin cable

-Turck4-pin to HP 200/48 10-pin cable

• Data collector and software

GETTINGSTARTEDQUICKLY

Page 2Electronic Copy of LTI’s Impulse User’s Manual 8th Edition © October 1998

Inserting the Batteries

Load the batteries by inserting them positive-end-

first into the battery compartment on the Impulse’s

back panel.

Twist the battery compartment cap

clockwise, finger tight, to secure it.

Warning: Do not use the new style of AA

batteries with the “voltage check” feature built

into the cell.

The “voltage check” cells are slightly larger in

diameter and will cause problems when inserting

into and extracting from the battery compartment.

The diameter of the battery tube on your Impulse

was chosen carefully to allow easy in/out of normal

AA batteries with no excess room for cell shifting

and possible loss of contact. Note that voltage

check batteries will cause similar problems with

most standard metal tube AA flashlights. Laser

Technology will not be responsible for damage to

the unit as a result of trying to force these new style

cells in or out of the battery tube. Do not peel off

the voltage check wrapper; this can cause an

instrument short circuit.

In addition, the instrument has its own battery

voltage monitor, thus eliminating the need for

voltage check cells.

Tabla de contenidos

Otros manuales de Instrumento de medición de Laser Technology

Laser Technology

Laser Technology TruPulse 200X Manual de instrucciones

Laser Technology

Laser Technology TruSense S300 Series Manual de usuario

Laser Technology

Laser Technology LTI 20/20 TruSpeed Manual de usuario

Laser Technology

Laser Technology MapStar TruAngle Manual de usuario

Laser Technology

Laser Technology TruPoint 300 Manual de usuario

Laser Technology

Laser Technology TruPulse 200 Manual de usuario

Laser Technology

Laser Technology TruPulse 200 Manual de usuario

Laser Technology

Laser Technology TruPoint 200h Manual de usuario

Laser Technology

Laser Technology LTI 20/20 TruSpeed Manual de usuario

Laser Technology

Laser Technology TruPulse L2 Manual de usuario

Laser Technology

Laser Technology TruPulse 200X Manual de usuario

Laser Technology

Laser Technology TruPulse 200X Manual de usuario

Laser Technology

Laser Technology esri TruPoint 300 Manual de usuario

Laser Technology

Laser Technology TruPulse 200X Manual de usuario

Laser Technology

Laser Technology TruPulse 360R Manual de usuario

Laser Technology

Laser Technology CR40C Manual de usuario

Laser Technology

Laser Technology LaserSoft SpeedCapture Manual de usuario

Laser Technology

Laser Technology UltraLyte LR B Manual de usuario

Laser Technology

Laser Technology Criterion RD 1000 Manual de usuario

Laser Technology

Laser Technology TruPulse 200L Manual de usuario

Laser Technology

Laser Technology TruPulse 200X Manual de usuario

Laser Technology

Laser Technology UltraLyte Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario