LanReady WUB1920RS Manual de usuario
2
802.11b/g /n USB Dongle
Model #
AWLL6077 V2 ;
WUB1920RS ;
WV-120N ;
UW-200NU2 ;
BS-WN-USB/1
User’s Manual
3
Table of Contents
1. Introduction ................................................................................................................. 4
1.1 Package Contents ................................................................................................. 4
1.2 Features ................................................................................................................ 4
2. Installation ................................................................................................................... 5
3. Configuring the Adapter ............................................................................................ 11
4. Wireless Utility ........................................................................................................ 17
4.1 Wireless Information ............................................................................................ 17
4.2 AP List ................................................................................................................. 18
4.3 Profile Settings..................................................................................................... 19
4.4 Configuring Encryption ........................................................................................ 21
4.5 Ad-hoc and Peer-to-Peer Wireless Networks ...................................................... 27
4.6 Wi-Fi Protected Setup (WPS) .............................................................................. 30
4.7 SoftAP…………………………............................................................................... 30
4.7 About ................................................................................................................... 38
Appendix A – Features.................................................................................................. 39
Appendix B – Information .............................................................................................. 40
Technical Support ......................................................................................................... 41
4
1. Introduction
Congratulations on your purchase of the Wireless N USB Adapter. Its high bandwidth
combined with extended wireless coverage delivers fast and reliable connection for all
of your networking applications when used with other Wireless N products.
A full range of security features such as WEP, WPA-PSK, and WPA2-PSK provide the
highest level of wireless network security. The bundled Wireless Utility allows you to set
up the adapter with an easy-to-use user interface. Best of all the Wireless N USB
Adapter works with 802.11g and 802.11b network devices ensuring compatibility with
your existing wireless products.
1.1 Package Contents
Before you begin the installation, please check the items of your package. The package
should include the following items:
xWUB1920RS Wireless N USB Adapter
xUSB Cable
xQuick Installation Guide
xInstallation CD (Driver/Utility/Manual)
1.2 Features
xIndustry’s highest wireless data rate with IEEE 802.11n draft specification 2.0
x64-bit/128-bit WEP encryption, Pre-shared Key (PSK), and Wi-Fi Protected
Access (WPA2 and WPA) support provide full protection for your wireless
connection
xHigher data rate increases the reliability and stability of wireless connections
xGreat for environments with higher wireless data traffic requirements
xFully backward-compatible with 802.11b/g devices
xWorks best with other Wireless N products
2. Installation
This section provides instructions on how to install the WUB1920RS Wireless N USB
Adapter. The driver is installed along with the utility.
Step 1 Insert the USB adapter into an available USB port and turn on your computer.
Step 2 After turning on the computer, Windows will launch the Found New Hardware
Wizard. The Found New Hardware Wizard appears differently depending on your
operating system. Click Cancel to quit the wizard and insert the Installation CD into your
CD drive.
5
Step 3 The Autorun screen will pop up. Select Install Utility and Driver from the menu.
6
Note: If the Autorun screen doesn’t appear automatically, or if you get a blank white
screen, go to Start,Run, and type D:\Utility\Setup.exe (where Dis the letter of your
CD drive) and click OK.
Windows Vista users:At this point, you may get a warning message like the one
below. Make sure that you click Allow to continue with the installation.
7
Step 4 Click Next at the welcome screen.
Step 5 Click Install to begin install.
8
Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click
Yes at the Digital Signature Not Found prompt).
9
For Windows Vista, click the Install this driver software anyway button when the
security warning appears.
Step 7 Click Finish.
10
3. Configuring the Adapter
This section describes how to connect your wireless adapter to a wireless network.
Note to Windows XP Users:
You must disable the Wireless Zero Configuration Utility in order to use the bundled
Wireless Utility. Please follow the steps below to disable XP’s wireless utility. Windows
Vista users can skip the following instructions and go to Step 1
Double-click on the Wireless Network Connection Icon in the system tray and then
click on Properties or Advanced.
When the new wireless network connection properties window appears, go to the
Wireless Networks tab, uncheck the “Use Windows to configure my wireless
network settings” check box and click OK.
11
Tabla de contenidos
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
