Lanner NCA-2510 Manual de usuario

The rackmount rail kit can be purchased as an accessory for existing system

including models: NCA-2510, NCA-2512, NCA-2520, NCA-4010, NCA-4012,

NCA-4112, NCA-4025.

The rackmount kit contains the following items:

2x Fixed Brackets

2x Adjustable Brackets

4x Flat-head Screws

Ensure that you have the following parts and tools available:

2x Mounting Ears (Provided with system)

6x Mounting Ear screws

8x Rack-mounting screws

1x Screwdriver, number 2

You can mount the network appliance on four posts in a 19-in rack or cabinet by

using the rackmount kit.

Note: Installing the system in a rack requires two people: one person lifts the system

while the other secures it to the rack.

If you are installing multiple systems in one rack, install the lowest one first and

proceed upward in the rack.

1. Attach the mounting ears to the front of the system chassis, using three (3)

mounting ear screws on each side to secure. Then, attach the fixed brackets to

the sides of the system, using two (2) flat-headed screws on each side to secure.

2. Slide the system into the rack, and secure the mounting ears to the rack, using

two (2) rack-mounting screws on each side.

Note: Ensure the rear of the system is supported throughout the process of

mounting the system into the rack.

P/N: 086W000457000

3. Slide the adjustable brackets into the fixed brackets attached to the sides of the

system.

4. Secure the adjustable brackets to the rack, using two (2) rack-mounting screws

on each side.

5. Installation is complete.

Mounting Installation Precautions:

The following should be considered for rack-mount or similar mounting installations:

The installation of this product must be performed by trained specialists; otherwise, a

non-specialist might create the risk of the system’s falling to the ground or other

damages.

For fixed mounting only. To prevent hazards, do not slide unit out on brackets or hang

unsecured system from brackets.

Do not stack additional weight on top of rack mount system.

Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient

strength for supporting the system or use of inappropriate installation components.

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than room

ambient. Therefore, consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature (Tma) specified by the

manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the

amount of airflow required for safe operation of the equipment is not compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the equipment

to the supply circuit and the effect that overloading of the circuits might have on

overcurrent protection and supply wiring. Appropriate consideration of equipment

nameplate ratings should be used when addressing this concern.

Reliable Grounding - Reliable grounding of rack mounted equipment should be

maintained. Particular attention should be given to supply connections other than direct

connections to the branch circuit (e.g. use of power strips).

P/N: 086W000457000

Otros manuales para NCA-2510

Este manual sirve para los siguientes modelos

Otros manuales de Hardware de red de Lanner

Lanner

Lanner ECA-4027 Manual de usuario

Lanner

Lanner uCPE NCA-4020 Manual de usuario

Lanner

Lanner NCA-4035 Manual de usuario

Lanner

Lanner ECA-4025 Manual de usuario

Lanner

Lanner NCA-6530 Manual de usuario

Lanner

Lanner NCA-5230 Manual de usuario

Lanner

Lanner IIOT-I530 Manual de usuario

Lanner

Lanner FW-8756 Manual de usuario

Lanner

Lanner NCA-2522 Manual de usuario

Lanner

Lanner NCS2-VT04 Manual de usuario

Lanner

Lanner R6S Manual de usuario

Lanner

Lanner NCA-5540 Manual de usuario

Lanner

Lanner HLM-1101 Manual de usuario

Lanner

Lanner FW-8771 Manual de usuario

Lanner

Lanner NCA-1040 Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Lanner

Lanner LEC-3340 Manual de usuario

Lanner

Lanner FW-8760 Manual de usuario

Lanner

Lanner NCA-4030 Manual de usuario

Lanner

Lanner EAI-I130 Manual de usuario

Lanner

Lanner NCA-1516 Manual de usuario

Lanner

Lanner NCA-4220 Manual de usuario

Lanner

Lanner NCA-6520 Manual de usuario

Lanner

Lanner NCA-1611A Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Cantek

Cantek NR310-4 Manual de usuario