Lamona LAM8702 Manual de usuario
Installation Instructions
Washing Machine
(To be used in conjunction with User Instructions)
lPlease read these Installation Instructions to ensure safe,
correctttingofthisappliance.
lThewashingmachineshouldbettedbyasuitablycompetent,
qualiedperson.
lPleasekeeptheseinstructionsinasafeplaceforfuturereference.
lDangerofsuffocationkeeppackagingmaterialawayfromchildren.
LAM8702/03
Warning for hazardous
situations with regard to
lifeandproperty.
Warning for
electricshock.
Warning for
riskofre.
Throughout this manual the
followingsymbolsareused.
2
10mmopen
endedspanner Flat and
cross head
screw drivers
DO NOT use high
speedimpact
powertools.
www.howdens.com
Safety Information
Installation
Tools required
Twopersonlift. Riskofinjury:
Bewareofsharpmetal
edges.Usegloveswhen
handling.
NOTE:Iftheelectricity
cable is damaged it
mustbereplacedbya
competentperson.
Washing machine must
bexedsecurelyand
level.
Risk of damage to
property:
Take care of surrounding
area when moving the
appliancetoprevent
damagetoooring,wall
coverings,pipesetc..
Ensurethatallpacking
andtransitprotectors
have been removed
fromtheappliance
beforepositioning.
DO NOT PUSH
against the washing
machinefasciapanel.
Thisapplianceisnot
designed for stacking
withotherappliances.
3
B(3x15mm)
A(4.5x10)
x2
x1
x2 x2 x5
x1
www.howdens.com
1. Remove transit POLY BLOCK..........................p.4
2. Removetransitbolts...........................................p.4
3. Dimensions..........................................................p.5
4. Fitfascialletandanti-tiltsupport....................p.5
5. Preparethedécordoor.......................................p.6
6. Washing machine connections..........................p.7
7. Connecting water hose.......................................p.8
8. Positioning the washing machine......................p.9
9. Fitdécordoorandmagneticcatches...............p.10
10. Raise and level the machine..............................p.11
11.Drainhoseandlter............................................p.12
12. Plinth.....................................................................p.12
Parts supplied
Fitting guide
Copyright©2018HowdenJoineryLtd.Allrightsreserved.
4
IMPORTANT:
REMOVE POLY BLOCK.
10mmopen
endedspanner
www.howdens.com
1- Remove transit item
2- Remove transit bolts
5
Position the washing machine
relativetoserviceconnections.
Décor fillet
can be added
Example
nominal
set-up
Min 5mm
Max 15mm
Anti-tilt block
45-50mm
*25mm
Approx 830mm
*At nominal set up -
165mm from floor to the
base of cabinet.
min
15mm
817mm-
831mm
554mm 597mm
820-920mm
min
575mm
*600mm
www.howdens.com
3- Dimensions
4 - Fit décor llet and anti-tilt block
*Ensuretheoorislevelandstrongenough
tosupportafullyloadedwashingmachine.
6
edge of door
35mm
47mm
2mm
22.5mm
4.5mm
edge of door
45mm
2mm
31mm
468.5mm
597mm
716mm
384mm
84.5mm
*21.5mm
12mm
(+1mm) 35mm Dia.
Example
B(3x15mm)
Cross head
B(3x15mm)
TOP
TOP
Left hand hinged door
openingshown,
(righthandopposite).
*Check and drill
hole according to
the actual hole
drilling position of
door frontal range
being used.
www.howdens.com
5- Prepare the décor door
Ifrequired,thandlesatthisstage,
(screwsmayneedcountersinking).
7
REMOVE
CAP/END
max.
100mm
min
500mm min
300mm
max
1000mm
min
500mm
min
300mm
max
1000mm
www.howdens.com
Alldimensionsaretotheoor. DO NOT insertthehosetoodeepintothewastepipe,
(Maximum hose length, 3.2 metres).
6- Washing machine connections
WARNING!Thisappliance
mustbeearthed.
(Socket must be accessible
after tting).
Ensurecap/endisremovedfrom
wastepipespigot.
WARNING!Donotuseextension
cables/adapters.
Ensure water is turned on and
the isolator valve is accessible
after tting.
Hoseconnection-3/4”.
Coldwaterpressure-
0.1–1Mpa(0.3-1.0Bar)
NOTE: Ensure hoses are not
kinked or trapped behind the
washing machine.
NOTE: Ifnecessaryloosenand
rotate the water hose towards
thewatersupplyandre-tighten.
(Always use the new hose
supplied with the washing
machine).
Cold water supply
10-80 lpm.
8www.howdens.com
7 - Connect water hose (cold water supply only)
NOTE: Rotate the water hose
towardsthewatersupplyand
tighten.(Always use the
new hose supplied with the
washing machine).
Incorrectwastepipeconguration. Correctwastepipeconguration.
9
&
www.howdens.com
8- Positioning the washing machine
NOTE: Ensure hoses
are not kinked or
trapped behind the
washing machine.
DO NOT PUSH against the washing machine fascia panel.
DO NOT adjust the rear feet
until in nal position,
(NEVER move the washing
machine with the rear feet
extended).
10
A(4.5x10)
A(4.5x10)
x2
www.howdens.com
9- Fit décor door and magnetic catches
Otros manuales para LAM8702
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Arandela de Lamona
Lamona
Lamona LAM8720 Manual de usuario
Lamona
Lamona LAM8777 Guía
Lamona
Lamona LAM8776 Guía
Lamona
Lamona HJA8901 Manual de usuario
Lamona
Lamona LAM8702 Manual de usuario
Lamona
Lamona LAM8775 Manual de usuario
Lamona
Lamona HJA 8514 Manual
Lamona
Lamona FLM8700 Manual de usuario
Lamona
Lamona FLM8702 Manual de usuario
Lamona
Lamona LAM8720 Manual de usuario
