Laird SSD40NBT Guía de configuración rápida

SSD40NBT

HARDWARE INTEGRATION GUIDE

VERSION 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

REVISION HISTORY

Version

Revision Date

Change Description

1.0 07/29/11 Initial Release Version (after preliminary versions)

Finalized mechanical drawings. Revisions to pin table (I/O)

1.1

08/03/11

Corrected Control Signal Timing diagram and text

1.2

08/05/11

Changed Power Type column of Pin Definitions table

1.3

08/28/11

Added PCM Timing information

1.4 10/06/11

Added Wi-Fi/BT power consumption numbers

Added note regarding the need for an external clock (pin 47)

Updated antenna port information

Added Appendix A: Schematic

Added SSD30AG/SSD40NBT Pin Comparison table

Added BT/AUX antenna port note

1.5

10/27/11

Added PCM defaults.

1.6 12/01/11

General edits including:

Revisions to pin table

Finalized Specifications data

Added “Integration Considerations” section

1.7 12/02/11

Updated the MSD40NBT schematic.

Updated Current Consumption numbers in the Specifications table.

Added series resistors information to the “Integration Considerations” section

Added product image

1.8

01/03/12

Updated Specification table

1.9

02/08/12

Add pin note and power notes

1.10

02/17/12

Updated Transmit Power numbers in the Specs table

2.0 4/17/12

Add AS/NZS (Australia, New Zealand) certifications

Changed the name of Pin 20

Updated AS/NZS links

2.2

6/29/12

Updated BT Transmit Power

2.3

7/11/12

Updated schematic, Certifications, Typical Receiver Sensitivity

2.4

8/15/12

Updated Operating Temperature

3.0 Updated format (converted to Laird)

Added “Note” with Figure 3

4.0 1/29/13 Updated Receive Sensitivity data

Re-added MIC frequency band and operating channel information.

4.1 1/30/13

Updated 5Ghz channel data and frequency data

Updated Operating Temperature data

4.2

17 May 2013

Added BT Priority

Important

note to the Block Diagram.

4.3 11 Oct 2013 Removed references to summitdata.com

Update mechanical drawing

4.4

26 Feb 2014

Added BT SIG certification section

4.5 25 March 2014 Added note regarding the following pins: CHIP_PWD_L, SYS_RST_L, BT_RST_L,

VDDIO_DR

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

CONTENTS

SSD40NBT ..................................................................................................................................................... 1

Revision History............................................................................................................................................ 2

Contents ....................................................................................................................................................... 3

Scope............................................................................................................................................................. 4

Operational Description.............................................................................................................................. 4

Block Diagram.............................................................................................................................................. 5

Specifications ............................................................................................................................................... 6

Recommended Operating Conditions and DC Electrical Characteristics ............................................... 11

SDIO Timing Requirements .................................................................................................................. 12

UART Timing Requirements ................................................................................................................. 13

PCM Interface Timing .......................................................................................................................... 13

Control Signal Timing Requirements .................................................................................................... 18

Pin Definitions............................................................................................................................................ 19

SSD30AG and SSD40NBT Pin Comparison Table.................................................................................. 22

Electrical Considerations ...................................................................................................................... 23

Integration Considerations................................................................................................................... 25

Mechanical Specifications ......................................................................................................................... 26

Mounting................................................................................................................................................. 27

Recommendations: .............................................................................................................................. 28

RF Layout Design Guidelines..................................................................................................................... 29

Regulatory.................................................................................................................................................. 30

Certified Antennas ................................................................................................................................... 30

Documentation Requirements.................................................................................................................. 31

FCC ..................................................................................................................................................... 31

Industry Canada................................................................................................................................... 32

European Union................................................................................................................................... 33

Bluetooth SIG Approvals ........................................................................................................................... 36

Subsystem Combinations ......................................................................................................................... 36

Assumptions ............................................................................................................................................ 36

Additional Assistance ............................................................................................................................... 37

Appendix A: Schematic.............................................................................................................................. 38

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

Scope

This document describes key hardware aspects of the Laird SSD40NBT radio module. This document is

intended to assist device manufacturers and related parties with the integration of this radio into their host

devices. Data in this document are drawn from a number of sources and include information found in the

Broadcom BCM4329data sheet issued in June of 2009.

Please contact Laird or visit the Laird to obtain the most recent version of this document:

http://www.lairdtech.com/Products/Embedded-Wireless-Solutions/Summit-Wi-Fi-Radio-Modules/SDC-

SSD40NBT/

OPERATIONAL DESCRIPTION

This device is an SDC-SSD40NBT radio module which supports IEEE

802.11a/b/g/n standards via an SDIO (Secure Digital Input/Output)

interface and Bluetooth version 2.1 via a serial UART (Universal

Asynchronous Receiver/Transmitter) interface. The radio operates in

unlicensed portions of the 2.4 GHz and 5 GHz radio frequency spectrum.

The device is compliant with IEEE 802.11a, 802.11b,802.11g, and

802.11n standards using Direct Sequence Spread Spectrum (DSSS),

Orthogonal Frequency Division Multiplexing (OFDM), and supports

Bluetooth 2.1 using Frequency Hopping Spread Spectrum (FHSS). The

device supports all 802.11a, 802.11b, 802.11g, 802.11n, and Bluetooth

data rates and automatically adjusts data rates and operational modes based on various environmental

factors.

When operating on channels in the UNII-2 and UNII-2 Extended bands that are in the 5GHz portion of the

frequency spectrum and are subject to Dynamic Frequency Selection requirements, the SDC-SSD40NBT fully

conforms to applicable regulatory requirements. In the event that specified types of radar are detected by the

network infrastructure, the SDC-SSD40NBT fully conforms to commands from the infrastructure for radar

avoidance.

The SDC-SSD40NBTis a System in Package (SiP) Quad Flat pack, No leads (QFN) module and interfaces to host

devices via a 56-padedge connector. The device is based on the Broadcom BCM4329chip which is an

integrated device providing a Media Access Controller (MAC), a Physical Layer Controller (PHY or baseband

processor), and fully integrated dual-band radio transceiver. To maximize operational range, the SDC-

SSD40NBT incorporates a 5 GHz power amplifier (PA) to increase transmit power. The frequency stability for

both 2.4 GHz (802.11b and 802.11g) and 5 GHz (802.11a) operation is +/- 20 ppm.

The SSD40NBT has its own RF shielding and does not require shielding provided by the host device into which

it is installed in order to maintain compliance with applicable regulatory standards. As such, the device may

be tested in a standalone configuration via an extender card.

The device buffers all data inputs so that it will comply with all applicable regulations even in the presence of

over-modulated input from the host device. Similarly, the SDC-SSD40NBT incorporates power regulation to

comply with all applicable regulations even when receiving excess power from the host device.

The SDC-SSD40NBT provides two diplexed antenna interfaces to support dual band transmit and receive

diversity. Supported host device antenna types include dipole and monopole antennas.

Note: When using a single antenna, it must be connected to the AUX port. BT does not function on the

Main port alone.

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

Regulatory operational requirements are included with this document and may be incorporated into the

operating manual of any device into which the SDC-SSD40NBT is installed. The SDC-SSD40NBT is designed

for installation into mobile devices such as vehicle mount data terminals (which typically operate at distances

greater than 20 cm from the human body) and portable devices such as handheld data terminals (which

typically operate at distances less than 20 cm from the human body). See “Documentation Requirements” for

more information.

BLOCK DIAGRAM

Figure 1: Block Diagram

Note: Transmitter frequencies for Wi-Fi are 2412-2462 MHz and 5180-5805 MHz. Transmitter

frequencies for BT are 2402-2480 MHz.

Note: BT functions on the AUX port and

not

on the Main port. For Wi-Fi and BT single-antenna

implementations, the AUX port

must

be used.

IMPORTANT: When BT is transmitting high priority traffic (such as during a scan and/or when

sending audio traffic) Wi-Fi receive is sent to the main antenna port (even when set to

AUX only)

When high priority transmission ends, Wi-Fi receive functionality returns to the AUX port (when set

to AUX only). For optimal Wi-Fi performance, we recommend that you populate both the Main

and the AUX ports with an antenna.

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

SPECIFICATIONS

Table 1: Specifications

Feature

Description

Physical Interface

0.4mm pitch QFN (Quad Flat Pack, No Leads)

Wi-Fi Interface

1-bit or 4-bit Secure Digital I/O

Bluetooth Interface

Host Controller Interface (HCI) using High Speed UART

Main Chip

Broadcom BCM4329

Input Voltage Requirements

3.3 VDC ± 10% (core)

I/O Signaling Voltage

1.8 to 3.3 VDC ± 10%

Average Current Consumption,

VDDIO = 3.3 volts

(At maximum transmit power

setting)

Note:

Standby

refers to the radio

operating in PM1 powersave

mode.

802.11a

(with BT in standby)

Transmit: 282 mA (931 mW)

Receive: 92 mA (304 mW)

Standby: TBD

802.11b

(with BT in standby)

Transmit: 314 mA (1036 mW)

Receive: 92 mA (304 mW)

Standby: TBD

802.11g

(with BT in standby)

Transmit: 288 mA (950 mW)

Receive: 92 mA (304 mW)

Standby: TBD

802.11n

(2.4 GHz) (with BT in standby)

Transmit: 292 mA (964 mW)

Receive: 92 mA (304 mW)

Standby: TBD

802.11n

(5 GHz) (with BT in standby)

Transmit: 270 mA (891 mW)

Receive: 92 mA (304 mW)

Standby: TBD

Bluetooth (with Wi-Fi in standby)

Transmit: TBD

Receive: TBD

Operating Temperature

-30° to 80°C (-22° to 176°F)

Operating Humidity

10 to 90% (non-condensing)

Storage Temperature

-30° to 85°C (-22° to 185°F)

Storage Humidity

10 to 90% (non-condensing)

Maximum Electrostatic Discharge

8 kV

Length

15.0 mm (0.59”)

Width

15.0 mm (0.59”)

Thickness

2.50 mm (0.1”)

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

Feature

Description

Weight

1.0 g (0.04 oz.)

Mounting

See the “Mounting” section for more information.

Wi-Fi Media

Direct Sequence-Spread Spectrum (DSSS)

Complementary Code Keying (CCK)

Orthogonal Frequency Divisional Multiplexing (OFDM)

Bluetooth Media

Frequency Hopping Spread Spectrum (FSSS)

Wi-Fi Media Access Protocol

Carrier sense multiple access with collision avoidance (CSMA/CA)

Network Architecture Types

Infrastructure and ad hoc

Wi-Fi Standards

IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h,

802.11i, 802.11n

Bluetooth Standards

Bluetooth version 2.1 with Enhanced Data Rate

Wi-Fi Data Rates Supported

802.11a (OFDM) 6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11b (DSSS, CCK) 1, 2, 5.5, 11 Mbps

802.11g (OFDM) 6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11n (OFDM, MCS 0-7) 6.5, 7.2, 13.0, 14.4, 19.5, 21.7, 26.0,

28.9, 39.0, 43.3, 52.0, 57.8, 58.5, 65.0, 72.2 Mbps

Modulation

BPSK @ 1, 6, 6.5, 7.2 and 9 Mbps

QPSK @ 2, 12, 13, 14.4,18, 19.5 and 21.7 Mbps

CCK @ 5.5 and 11 Mbps

16-QAM @ 24, 26, 28.9, 36, 39 and 43.3 Mbps

64-QAM @ 48, 52, 54, 57.8, 58.5, 65, and 72.2 Mbps

802.11n Spatial Streams

1 (Single Input, Single Output)

Bluetooth Data Rates Supported

1, 2, 3 Mbps

Bluetooth Modulation

GFSK@ 1 Mbps

Pi/4-DQPSK@ 2 Mbps

8-DPSK@ 3 Mbps

Regulatory Domain Support

FCC (Americas, Parts of Asia, and Middle East)

ETSI (Europe, Middle East, Africa, and Parts of Asia)

MIC (Japan) (formerly TELEC)

KC (Korea) (formerly KCC)

2.4 GHz Frequency Bands

ETSI

2.4 GHz to 2.483 GHz

FCC

2.4 GHz to 2.473 GHz

MIC

2.4 GHz to 2.495 GHz

KCC

2.4 GHz to 2.483 GHz

2.4 GHz Operating Channels

ETSI: 13 (3 non-overlapping)

FCC: 11 (3 non-overlapping)

MIC 14 (4 non-overlapping)

KCC: 13 (3 non-overlapping)

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

Feature

Description

5 GHz Frequency Bands

ETSI

5.15 GHz to 5.35 GHz

5.47 GHz to 5.725 GHz

FCC

5.15 GHz to 5.35 GHz

5.47 GHz to 5.725 GHz

5.725 GHz to 5.82 GHz

MIC

(Japan)

5.15 GHz to 5.35 GHz

5.725 GHz to 5.82 GHz

5 GHz Operating Channels

ETSI: 19 non-overlapping

FCC: 23 non-overlapping

MIC (Japan): 8 non-overlapping

KC: 12 non-overlapping

Transmit Power

Note:

Transmit power varies

according to individual country

regulations. All values nominal,

+/-2 dBm.

Note:

Laird 40 series radios

support a single spatial stream

and 20 MHz channels only.

802.11a

6 Mbps

16 dBm (40 mW)

54 Mbps

14 dBm (25 mW)

802.11b

1 Mbps

17 dBm (50 mW)

11 Mbps

16 dBm (40 mW)

802.11g

6 Mbps

15 dBm (32 mW)

54 Mbps

13 dBm (20mW)

802.11n

(2.4 GHz)

6.5 Mbps (MCS0)

15 dBm (32 mW)

65 Mbps (MCS7)

11 dBm (13 mW)

802.11n

(5 GHz)

6.5 Mbps (MCS0)

16 dBm (40 mW)

65 Mbps (MCS7)

13 dBm (20 mW)

Bluetooth

1 Mbps

0 dBm (1mW)

2 Mbps

0 dBm (1mW)

3 Mbps

0 dBm (1mW)

Typical Receiver Sensitivity

Note:

All values nominal, +/-3

dBm.

802.11a:

6 Mbps -90 dBm

24 Mbps -84 dBm

54 Mbps -75 dBm (PER <= 10%)

802.11b:

1 Mbps -96 dBm

11 Mbps -89 dBm (PER <= 10%)

802.11g:

6 Mbps -90 dBm

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

Feature

Description

24 Mbps -84 dBm

54 Mbps -74 dBm (PER <= 10%)

802.11n (2.4 GHz)

MCS0 Mbps -90 dBm

MCS4 Mbps -79 dBm

MCS7 Mbps -72 dBm

802.11n (5 GHz)

MCS0 Mbps

MCS4 Mbps

-89 dBm

-79 dBm

MCS7 Mbps -71 dBm

Bluetooth:

1 Mbps TBD

2 Mbps TBD

3 Mbps TBD

Operating Systems Supported

Windows Mobile 6.5

Windows Mobile 6.1

Windows Mobile 6.0

Windows Mobile 5.0

Windows Embedded CE 7.0

Windows Embedded CE 6.0 R3

Windows Embedded CE 6.0 R2

Windows Embedded CE 6.0

Windows Embedded CE 5.0

Linux, 2.6.x, 3.x.x kernel

Security

Standards

Wireless Equivalent Privacy (WEP)

Wi-Fi Protected Access (WPA)

IEEE 802.11i (WPA2)

Encryption

Wireless Equivalent Privacy (WEP, RC4 Algorithm)

Temporal Key Integrity Protocol (TKIP, RC4 Algorithm)

Advanced Encryption Standard (AES, Rijndael Algorithm)

Encryption Key Provisioning

Static (40-bit and 128-bit lengths)

Pre-Shared (PSK)

Dynamic

802.1X Extensible Authentication Protocol Types

EAP-FAST

EAP-TLS

EAP-TTLS

PEAP-GTC

PEAP-MSCHAPv2

PEAP-TLS

LEAP

SSD40NBT

Hardware Integration Guide, version 4.5

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2923-0610

www.lairdtech.com/wireless

Laird Technologies

Feature

Description

Compliance

ETSI Regulatory Domain

EN 300 328 (Wi-Fi®)

EN 300 328 v1.7.1 (BT 2.1)

EN 301 489-1

EN 301 489-17

EN 301 893

EN 60950-1

EU 2002/95/EC (RoHS)

FCC Regulatory Domain

FCC 15.247 DTS – 802.11b/g (Wi-Fi) – 2.4 GHz & 5.8 GHz

FCC 15.407 UNII – 802.11a (Wi-Fi) – 2.4 GHz & 5.4 GHz

FCC 15.247 DSS – BT 2.1

Industry Canada

RSS-210 – 802.11a/b/g/n (Wi-Fi) – 2.4 GHz, 5.8 GHz, 5.2 GHz, and 5.4 GHz

RSS-210 – BT 2.1

AS/NZS

AS/NZS 4268:2008 +A1:2010 (RLAN device)

AS/NZS 4268:2008 +A1:2010 (BT device)

Certifications

Wi-Fi Alliance

802.11a, 802.11b, 802.11g , 802.11n

WPA Enterprise

WPA2 Enterprise

Cisco Compatible Extensions

(Version 4)

Bluetooth SIG Qualification

Warranty

Limited Lifetime

All specifications are subject to change without notice

Note: The BCM4329 has an internal power-on (POR) circuit. The device will be held in reset for a

maximum of 110 ms after VDDC and VDDIO have both passed the 0.6V threshold. Wait at least

110 ms after VDDC and VDDIO are available before initiating SDIO accesses. The external reset

signals are logically ORed with this POR. SO if either the internal POR or one of the external resets

are asserted, the device will be reset.

Tabla de contenidos

Otros manuales de Unidad de control de Laird

Laird

Laird CF10G Guía de configuración rápida

Laird

Laird SDC-SSD30AG Guía de configuración rápida

Laird

Laird SDC-CF20G Guía de configuración rápida

Laird

Laird BL600-SA Guía de configuración rápida

Laird

Laird RM024 Guía de configuración rápida

Laird

Laird BT85 Series Manual de usuario

Laird

Laird BT740-SA Guía de configuración rápida

Laird

Laird MSD45N Guía de configuración rápida

Laird

Laird BTM410 Guía de configuración rápida

Laird

Laird BL600 Series Instrucciones de instalación y funcionamiento

Laird

Laird MSD50NBT Manual de usuario

Laird

Laird BTM420 Manual de usuario

Laird

Laird BT800 series Guía de configuración rápida

Laird

Laird RM186 Guía de configuración rápida

Laird

Laird BTM510 Manual de usuario

Laird

Laird BTM410 Manual de usuario

Laird

Laird BTM410 Manual de usuario

Laird

Laird BTM521 Manual de usuario

Laird

Laird BT830 Guía de configuración rápida

Laird

Laird CL4790 Manual de usuario

Laird

Laird BTM44 Series Guía de configuración rápida

Laird

Laird BTM430 Manual de usuario

Laird

Laird BT900-SA-0x Guía de configuración rápida

Laird

Laird LSR Sterling-LWB5 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario