Laguna Tools T800i Manual de usuario

OPERATING MANUAL

MT0T800I

T800i

Shaper

Dear Woodworker:

Thank you for your purchase and welcome to the Laguna Tools group

of discriminating woodworkers. I understand that you have a choice

of where to purchase your machines and appreciate the confidence

you have in our products.

Every machine sold by Laguna Tools has been carefully designed and

well thought through from a woodworker’s perspective. I cut on our

bandsaws, lathes, table saws and combination machines. Through

my hands-on experience, I work hard to make our machines better.

I strive to give you machines that inspire you to create works of art.

Machines that are a joy to run and work on, machines that encourage

your performance.

Twenty years ago Laguna Tools was founded to introduce European

woodworking machines to the North American woodworker. Today,

we offer high-performance machines with innovative solutions that

meet the needs of woodworkers and their ever-evolving craft.

I started Laguna Tools as a woodworker, and I still am.

Thank you again for becoming a Laguna Tools customer.

Torben Helshoj

President and Founder - Laguna Tools

Imagination, Innovation and Invention at Work.

Table of contents

Safety Rules

Warranty

Noise emission

Specification sheet

Receiving your machine

Unpacking your machine

Introduction to your machine

Parts of your machine

Assembly, setup and using your machine

Where to locate your machine

Assembling your machine

Maintenance

Troubleshooting

Accessories

Electrical drawing

Spare parts

Exploded view drawings and parts lists

Safety Rules

As with all machinery there are certain hazards involved with the operation

and use. Using equipment with caution will considerably lessen the

possibility of personal injury. However, if normal safety precautions are

overlooked or ignored, personal injury to the operator may result. If you

have any questions relative to the installation and operation, do not use the

equipment until you have contacted your supplying distributor.

Read carefully before operating the shaper:

1. Keep the working area clean and be sure adequate lighting is

available.

2. Do not wear loose clothing, gloves, bracelets, necklaces or

ornaments. Wear face, eye, respiratory and body protection devices

as indicated for the operation or environment.

3. Be sure that the power is disconnected from the machine before tools

are serviced or an attachment is to be fitted or removed.

4. Never leave the machine with the power on.

5. Do not use dull, gummy or cracked cutting tools.

6. Be sure that the keys and adjusting wrenches have been removed and

all the nuts and bolts are secured.

Limited Warranty

New woodworking machines sold by Laguna Tools carry’s a one year

warranty from the date of shipping. Laguna Tools guarantees all new

machines sold to be free of manufacturer’s defective workmanship, parts and

materials. We will repair or replace, without charge, any parts determined

by Laguna Tools, Inc. to be a manufacturer’s defect. We require the defective

item/part returned to Laguna Tools. In the event the item/part is determined

to be damaged due to lack of maintenance, cleaning or misuse/abuse the

customer will be responsible for the cost to replace the item/part, plus all

related shipping charges. This limited warranty does not apply to natural

disasters, acts of terrorism, normal wear and tear, product failure due to lack

of maintenance or cleaning, damage caused by accident, neglect, lack of or

inadequate dust collection, misuse/abuse or damage caused where repair or

alterations have been made or attempted by others.

Laguna Tools, Inc. is not responsible for additional tools or modifications sold

or performed (other than from/by Laguna Tools, Inc.) on any Laguna Tools,

Inc. woodworking machine. Warranty may be voided upon the addition of

such noted tools and/or modifications, determined on a case-by-case basis.

Normal user alignment, adjustment, tuning and machine settings are not

covered by this warranty. It is the responsibility of the user to understand

basic woodworking machinery settings and procedures and to properly

maintain the equipment in accordance with the standards provided by the

manufacturer.

Parts, under warranty, are shipped at Laguna Tools, Inc’s cost either by

common carrier, UPS ground service or similar method. Technical support

to install replacement parts is primarily provided by phone, fax or e-mail.

The labor required to install replacement parts is the responsibility of the

user.

Laguna Tools is not responsible for damage or loss caused by the freight

company or other circumstances not in our control.

Only new machines sold to the original owner are covered by this warranty.

For warranty repair information, call 1-800-332-4094.

Noise emission

Notes concerning noise emission :

Given that there exists a relationship between noise level and exposure

times, it is not possible to be precise enough to determine the need for

supplementary precautions. The factors affecting the true level of exposure

to operators are clearly the amount of time exposed, the characteristics of

the working environment, other sources of dust and noise, etc. For example,

adjacent machines affect the level of ambient noise. It is possible that

exposure level limits will vary from country to country.

Specification sheet

Description Specification

Table dimensions 800mm x 800mm 31 ½” x

31 ½’

Height. Ground to table 806mm 31 ¾”

Weight net 330kg 726lb

Motor power 4,8kW 6,4 hp 3 phase

Spindle speeds 1400 / 3500 / 6000 / 8000

rpm

Diameter of spindle 31,75mm 1 ¼”

Usable spindle length 175mm 6.9”

Spindle tilt 90 to – 45 Degrees

Noise level [machine only] 3500 rpm 69dB 8000 rpm

76dB

Receiving your machine

Note: It is probable that a third party will deliver your machine.

Before you unpack your new machine, you will need to first inspect the

packing, invoice and shipping documents supplied by the driver. Ensure that

there is no visible damage to the packing or the machine. You need to do this

prior to the driver leaving. All damage must be noted on the delivery

documents and signed by you and the delivery driver. You must then contact

the seller [Laguna Tools] as soon as practical. If damage is found after

delivery, contact the seller as soon as practical.

Introduction to shaper

This Shaper is designed to give you years of safe service. Read this owners

manual in its entirety before assembly or use.

Parts of the shaper

The machine does not have many parts. The major parts are discussed in

this manual. If you are not familiar with the machine, take the time to read

this section and become familiar with the machine.

Identification

There is a plate at the back of the machine listing all the manufacturing data

including the serial number, model, etc.

Cabinet

The cabinet has a large footprint and is a welded construction manufactured

from heavy gauge steel plate. The cabinet houses all the parts of the

Laguna T800I

machine and the heavy construction ensures that the machine is stable. This

weight also helps to absorb any vibration that is produced during cutting.

Table

The table is manufactured from cast iron [cast iron is a live material and will

move over time] and is provided with leveling bolts that clamp the table to

the cabinet and also level it.

Spindle housing

The spindle housing assembly is attached to the table and is of a heavy cast-

iron construction. It houses the motor, spindle, tilt mechanism, and vertical

movement adjustment. This is the heart for your machine and allows

adjustment of the cutter speed, angle and position.

Shaper fence system

The machine is supplied with a shaper fence system that incorporates the

following features: Dust port, aluminum adjustable fence system, hold

down, hold in assembly.

Electrical system

The electrical system consists of an electrical motor [with breaking system],

start switch, stop switch, limit switches, door switch, speed indicators,

contactor and internal breaker. No cable or plug is supplied as the length of

the cable and the type of plug will be dependent on your installation. There is

a CEE plug and socket fitted to the machine to allow easy connection and

disconnection of the electrical power to the machine.

Control panel

The control panel has the following features:

1. Forward / reverse switch.

2. Stop button.

3. Start switch.

4. Speed selected indicator lights [1400, 3500, 6000 and 8000rpm].

The spindle tilt, vertical movement handles and locking handles are located

on the sides of the machine.

Dust collection

A dust collection port is located at the back of the machine and is 4”

diameter. It connects to the bottom of the spindle housing. A second dust

collection port is located at the back of the shaper hood and has a diameter

of 4 3/4”

Table insert rings

On the machine there are 3 table insert rings and a blanking disc to allow for

different cutter configurations and sizes.

Mobility kit [optional]

The mobility kit is easy to fit, and the machine is located directly on the floor

when the mobility kit is not in use.

Unpacking your machine

To unpack your machine you will need tin snips, knife screw driver

[star] and a wrench.

1. Using the tin snips cut the banding

that is securing the box [If fitted].

WARNING: EXTREME CAUTION

MUST BE USED BECAUSE THE

BANDING WILL SPRING AND

COULD CAUSE INJURY. Then

dismantle the box or remove the

screws that secure the box to the

base [row of screws around the

bottom of the box].

2. Lift the box off and discard. This

may need two people.

3. Using the knife, cut the plastic wrap

and remove it.

4. Remove the boxes on the base of the box.

5. Remove the base mounting bolts that secure the machine to the base.

6. It is recommended that the machine be removed from the pallet by

lifting it with a hoist or forklift. Place a sling as shown and lift

vertically. Four lifting hooks are provided to assist you [“S” shaped]

that fit into the holes at the bottom of the cabinet.

7. Remove the pallet and lower to the floor.

The machine can be lifted using a forklift truck, by using a “SLING” as shown

with a minimum lifting capability of 2,000 Kg [4,400lb]

Note: The machine is heavy, and if you have any doubt about the

described procedure seek professional assistance. Do not attempt

any procedure that you feel is unsafe or that you do not have the

physical capability of achieving.

Laguna T800I

What you will receive with your machine

Lifting hooks Optional mobility kit

Shaper Fence system

Laguna T800I

Fitting the optional mobility kit [If

ordered]

Slide the axel through the lower inside holes

on the side of the machine and fit the spacer

[large washer] onto the axel.

Fit the wheel assembly, nut and

washer on to the axel.

To activate the moblity kit, insert the

handle into the tube and rotate so that

the machine is lifted. When in the up position, insert the sliding pin. Repeat

on the other side of the machine.

Fit the cast-iron bracket to the

front of the machine with the

bolts provided into the tapped

holes. Move the machine by

inserting the transport bar and

lifting.

Wheel

assembly

fitted Wheel

assembly

activated

Front bracket

and transport

handle

Axel fitted

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Laguna Tools

Laguna Tools

Laguna Tools DAKE Force 25DA Manual de operación y mantenimiento

Laguna Tools

Laguna Tools PP16 XC Pro Manual de usuario

Laguna Tools

Laguna Tools Dake 6-275 Manual de operación y mantenimiento

Laguna Tools

Laguna Tools P12 10 Manual de usuario

Laguna Tools

Laguna Tools PRO SERIES Manual de usuario

Laguna Tools

Laguna Tools DAKE Force 50DA Manual de operación y mantenimiento

Laguna Tools

Laguna Tools Dake SB-32V Manual de operación y mantenimiento

Laguna Tools

Laguna Tools MJOPL104200 Manual de usuario

Laguna Tools

Laguna Tools DAKE 4 Manual de usuario

Laguna Tools

Laguna Tools PP16 XC Pro Manual de usuario

Laguna Tools

Laguna Tools Platinum Series Manual de usuario

Laguna Tools

Laguna Tools MRS5000-0280 Manual de usuario

Laguna Tools

Laguna Tools DAKE Force 10DA Manual de operación y mantenimiento

Laguna Tools

Laguna Tools DAKE 5 Manual de usuario

Laguna Tools

Laguna Tools Dake Force 150 Manual de usuario

Laguna Tools

Laguna Tools Dake 972200 Manual de operación y mantenimiento

Laguna Tools

Laguna Tools P12 5 Manual de usuario

Laguna Tools

Laguna Tools SHEARTEC II Manual de usuario

Laguna Tools

Laguna Tools DAKE 3 Manual de usuario

Laguna Tools

Laguna Tools RPM5 Manual de usuario

Laguna Tools

Laguna Tools DAKE 1 Manual de usuario

Laguna Tools

Laguna Tools MJOIN 8012-0130 Manual de usuario

Laguna Tools

Laguna Tools DAKE 75H Manual de operación y mantenimiento

Laguna Tools

Laguna Tools DAKE 150H Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual