La Crosse Technology WS9123IT Manual de usuario

TEMPERATURE AND HUMIDITY WEATHER STATION

Model WS9123IT Instruction Manual

!!Please read carefully before operating!!

INTRODUCTION:

Congratulations on purchasing this tiny 915MHz Temperature and Humidity Weather

Station which displays the time, indoor temperature, and up to three outdoor temperatures

and humidity readings. With only two easy to use keys, this product is ideal for use in the

home or office.

« Instant Transmission+» is the up and coming state-of-the-art new

wireless transmission technology, exclusively designed and developed by

LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured

from the transmitters: follow your climatic variations in real-time!

FEATURES:

The Temperature Station

LCD

Display

Function

Keys

Hanging

Hole

Battery

compartment

cover

Removable

stand

Quartz clock in 12 or 24-hour time display (hour and minute, manually set)

Indoor and outdoor temperature reading in degree Celsius (°C) or Fahrenheit (°F)

Outdoor humidity reading in %RH

Can receive up to three outdoor transmitters

Minimum and Maximum records of indoor temperature, outdoor temperature and

outdoor humidity

Low battery indicator

Table standing or wall mountable

The Outdoor Thermo-Hygro Transmitter

Remote transmission of outdoor temperature and humidity to

Temperature Station by 915 MHz signals

Displays alternately the measured temperature and humidity

readings on LCD

Shower proof casing

Wall mounting case. Mounting at a sheltered place. Avoid direct

rain and sunshine.

SETTING UP:

When one transmitter is to be used

1. First, insert the batteries to the transmitter (see “How to install and replace

batteries in the Thermo-hygro transmitter”below).

2. Within 2 minutes of powering up the transmitter, insert the batteries to the

Temperature Station (see “How to install and replace batteries in the

Temperature station”below). Once the batteries are in place, all segments of the

LCD will light up briefly. Following the indoor temperature and the time as 12:00 will

be displayed. If they are not shown in LCD after 60 seconds, remove the batteries

and wait for at least 60 seconds before reinserting them. Once the indoor data is

displayed user may proceed to the next step.

3. After the batteries are inserted, the Temperature Station will start receiving data

signal from the transmitter. The outdoor temperature and humidity should then be

displayed on the Temperature station. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 915 MHz transmission however, this should under good

conditions be a distance no more than 100 metres between the final position of the

Temperature Station and the transmitter (see notes on “Positioning” and “915 MHz

Reception”).

When more than one transmitter is to be used

1. User shall remove all the batteries from the temperature station and transmitters

and wait 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries to the

Temperature Station. Once the batteries are in place, all segments of the LCD will

light up briefly. Following the indoor temperature and the time as 12:00 will be

displayed. If they are not displayed in the LCD after 60 seconds, remove the

batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity from the first transmitter (channel 1) should

then be displayed on the Temperature station. Also, the signal reception icon will be

displayed. If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

and humidity readings from the first transmitter are displayed on the temperature

station.

Note: User shall insert the batteries into the second transmitter within 30 seconds of

reception of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the

"channel 2" icon should then be displayed on the Temperature station. If this does

not happen after 2 minutes, the batteries will need to be removed from all the units

and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and

outdoor data are displayed on the temperature station. Then within 2 minutes, the

channel 3 outdoor data from the third transmitter will be displayed and the channel

icon will shift back to "1" once the third transmitter is successfully received. If this

does not happen, user shall restart the setting up from step 1.

Note: User shall insert the batteries into the third transmitter within 30 seconds of

reception of the second transmitter.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION

The Temperature Station uses 2 x AAA, IEC LR3, 1.5V batteries.

When batteries need to be replaced, the low battery icon will appear

on the LCD. To install and replace the batteries, please follow the

steps below:

1. Lift up the battery compartment cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

Tabla de contenidos

Otros manuales de Estación meteorológica de La Crosse Technology

La Crosse Technology

La Crosse Technology CA76669 Dimensiones

La Crosse Technology

La Crosse Technology WS-6010U-IT Manual de usuario

La Crosse Technology

La Crosse Technology C84428 Manual de usuario

La Crosse Technology

La Crosse Technology WS-1610TWC-IT Hoja de especificaciones

La Crosse Technology

La Crosse Technology 327-1418BW Manual de usuario

La Crosse Technology

La Crosse Technology 082616 Manual de operación y mantenimiento

La Crosse Technology

La Crosse Technology 9245 Manual de usuario

La Crosse Technology

La Crosse Technology CA74962 Manual de usuario

La Crosse Technology

La Crosse Technology WS-7136U Manual de usuario

La Crosse Technology

La Crosse Technology 308A-146 Manual de usuario

La Crosse Technology

La Crosse Technology V10v2 Manual de usuario

La Crosse Technology

La Crosse Technology 308-179OR Manual de usuario

La Crosse Technology

La Crosse Technology S84107 Manual de usuario

La Crosse Technology

La Crosse Technology S88907 Manual de usuario

La Crosse Technology

La Crosse Technology WS-7044U Manual de usuario

La Crosse Technology

La Crosse Technology T83646v2 Dimensiones

La Crosse Technology

La Crosse Technology WS-7391UD Manual de usuario

La Crosse Technology

La Crosse Technology WS-2510 Manual de usuario

La Crosse Technology

La Crosse Technology Wireless Weather Station Manual de usuario

La Crosse Technology

La Crosse Technology WS-450B Manual de usuario

La Crosse Technology

La Crosse Technology V30V2 Dimensiones

La Crosse Technology

La Crosse Technology WS-9016TWC Manual de usuario

La Crosse Technology

La Crosse Technology 308-1414WBV2 Manual de usuario

La Crosse Technology

La Crosse Technology V22-WRTH Manual de usuario

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario

TFA

TFA 30.3013.IT Manual de usuario

Alecto

Alecto WS-1200 Manual de usuario

Oregon Scientific

Oregon Scientific RMR966PA Manual de usuario