La Crosse Technology WS6210 Manual de usuario

WS6210 User Manual

Features:

 DCF Radio control time function

 Perpetual Calendar Up to Year 2099

 Day of week in 7 languages user selectable: English, German, Italian, French, Spanish, Netherlands and Danish

 Time in optional 12/24 hour format

 Daily Alarm Function

 Automatic snooze function (OFF or 5~60min)

 The moon phase display

 Barometric pressure:

— Barometric pressure measurement ranges: 600hPa/mb (17.72inHg) to 1100hPa/mb (32.50inHg)

— Pressure alternatively in hPa/mb or inHg

 Humidity: Indoor & Outdoor measurable range: 20%RH ~ 95%RH

 Temperature:

— Indoor temperature measurement ranges: -9.9°C (15°F) to 50°C (122°F)

— Outdoor temperature measurement ranges: -40°C (-40°F) to 70°C (158°F)

— Temperature alternatively in °C or °F.

— Outdoor thermometer and frost alert

 Minimum/maximum display for air humidity and temperature

 Wireless Outdoor Sensor:

— Wall Mount or Table Stand

— One Wireless Thermo Sensor Included

— 433.92MHz RF transmitting frequency

— 60 meters transmission range in an open area

 The weather forecasting function

 Power Supply:

Weather Station:

Battery: 2 x LR6 AA

Dimensions : 148.3 x 85 x 44.4 mm

Wireless Outdoor Sensor:

Battery:2 x LR03 AAA

WS6210 User Manual

Weather Station Appearance

Part A-Positive LCD

A1: Weather Forecasting,

A2: Barometric pressure

A3: Outdoor Temperature

A4: Indoor Temperature

A5: Outdoor Humidity

A6: Indoor Humidity

A7: Time/Calendar or Alarm time/ Week

A8: Time Moon Phase

Part B – Back button and power

B1: “SNOOZE/LIGHT” touch field

B2: Keypad

B3: Battery compartment

WS6210 User Manual

Part C –Wireless Remote Sensor:

C1: LCD display – Temperature

C2: LCD display – Humidity

C3: Transmit signal LED

C4: “°C/°F” button

C5: “TX” button

C6: “CHANNEL 1 or 2 or 3” switch

C7: Battery compartment

WS6210 User Manual

Initial operation:

 Open Weather Station battery compartment cover

 Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]

 When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will hear a

beep tone, and detect indoor temperature & humidity.

 The Weather Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3

minutes and is displayed by a flashing reception RF antenna symbol in the “OUTDOOR” display area on the receiver.

 This now, open Wireless Outdoor Sensor battery compartment cover ,Insert 2 x AAA batteries observing polarity [ “+”

and “–“ marks]

 After receiver has created a connection to the outdoor remote sensor, it will then b enters the Radio control time

receive mode.

Reception of the Radio signal:

 The clock automatically starts the DCF signal search after 7 minutes of any restart or changing of new fresh batteries.

The radio mast icon starts to flash.

 At 1:00 /2:00 / 3:00, the clock automatically carries out the synchronization procedure with the DCF signal to correct

any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio mast icon disappears from

the display), the system will automatically attempt another synchronization at the next full one hour. This procedure is

repeated automatically up to total 5 times.

 To start manual DCF signal reception, press and hold down the “+” button for two seconds. If no signals received

within 7 minutes, then the DCF signal search stops (the radio mast icon disappears) and start again at the next full one

hour.

 During RC reception，to stop searching radio signal, press the “+” button once.

F.Y.I.:

 A flashing radio mast icon indicates that the DCF signal reception has started

 A continuously displayed radio mast icon indicates that the DCF signal was received successfully

 We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or computer

monitors

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme circumstances,

place the system close to the window.

 During the RC receive mode, only the “+” button function, other button operation have no function, If you want

WS6210 User Manual

to carry out other functions of operation, please press “+” button to exit the RC receiving mode.

Manual time setting:

 Press once “ ” button, can switch the display calendar or second or alarm time

 Press and hold down the “ ” button for 2 seconds, the unit of temperature display starts to flash. Now use

the “+” and “-” button to set the temperature of the unit, the unit of temperature can be set to “°C” or “°F”

 Press “ ” to confirm your setting, the unit of pressure display starts to flash. Now use the “+” and “-” button

to set the pressure of the unit, the unit of t pressure can be set to “hPa” or “inHg”

 Press “ ” to confirm your setting, the 12/24 hour mode display starts to flash. Now use “+” and “-” buttons

to set the correct 12/24 hour mode.

 Press “ ” to confirm your setting, the RCC icon display starts to flash, Now use “+” and “-” buttons set the

RCC receive function to activate(ON) or close(OFF)

 Press “ ” to confirm your setting, the Time zones start to flash, Now use “+” and “-” buttons set a correct

time zone (-12 to +12).

 Press “ ” to confirm your setting, the Hour display starts to flash. Now use “+” and “-” buttons to set the

correct hour.

 Press “ ” to confirm your setting, the Minute displays starts to flash. Now use“+” and “-” buttons to set the

correct minute.

 Press “ ” button to confirm your setting, the Month and Date icon display starts to flash. Now use “+” and

“-” buttons to set the date display on Month/Date or Date/Month.

 Press “ ” button to confirm your setting, the Year display 2014 starts to flash. Now use “+” and “-” buttons

to set the correct year.

 Press “ ” button to confirm your setting, the Month display starts to flash. Now use “+” and “-” buttons to

set the correct month.

 Press “ ” button to confirm your setting, the Date display starts to flash. Now use “+” and “-” buttons to set

the correct date.

 Press “ ” button to confirm your setting, the language selection for the Weekday displays starts to flash.

Now use “+” and “-” buttons to select a language.

Language Sunday

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

German, GE SO MO DI MI DO FR SA

English, EN SU MO TU WE TH FR SA

WS6210 User Manual

French, FR DI LU MA ME JE VE SA

Italian, IT DO LU MA ME GI VE SA

Spanish, SP DO LU MA MI JU VI SA

Dutch, DU ZO MA DI WO DO VR ZA

Danish, DA SO MA TI ON TO FR LO

 Press“ ” to confirm your setting and to end the setting procedures, enter the clock mode

F.Y.I.:

 After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time Mode.

 There are 7 languages of Weekday: English, German, Italian, French, Spanish, Dutch and Danish.

Setting the daily alarms:

 Press once “ ” button, the display conversion to alarm activation mode, In this mode, press the “ ”

button again to activate the alarm function, which is displayed as "ON", while the alarm icon " " is displayed。Also, in

this mode the alarm has been activated, and then press “ ” button, you can turn off the alarm function, the

display show "OFF" and the alarm icon " " does not show

 Press and hold down “ ” button for 2 seconds until Alarm Time hour display of the Alarm time starts to flash.

Use the “+” and “-” buttons to set the required hour.

 Press “ ” button to confirm your setting, The Minute display of the Alarm time starts to flash. Use the “+” and

“-” buttons to set the required minute.

 Press “ ” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “+” and “-”

buttons to set the minute of snooze you need.

 Press “ ” button to confirm your setting and to end the setting procedure

F.Y.I.:

 After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock

mode.

 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be

repeated automatically after 24 hours.

 Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.

 the snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit is

minutes.

WS6210 User Manual

Switching off the alarm signal

 The alarm sound when the trigger, press any button except the “ ” button or press hold the

“ ” button for 2 seconds to stop the alarm signal.

Snooze function:

 Touch the “ ” field or press the “ ” button the alarm signal sounds to get to SNOOZE

mode. The alarm signal sounds again after already been set.

 In snooze mode, press any button except the “ ” button or press hold the “ ” button for

2 seconds to exit the snooze mode.

F.Y.I.:

When the snooze function is set to OFF, the alarm sound when the trigger, press “ ” does not have this

snooze function.

Lunar phases:

 The weather station has a display which automatically displays the current lunar phase

New

moon

Waxing

half-moon

Half-moon

Waxing full

moon

Full

moon

Waning full

moon

Half-moon

Waning

half-moon

Comfort display

 Indoor comfort level is calculated according to the indoor temperature and humidity, a total of 5 levels.

Comfortable too cold or too hot

Displaying temperature/humidity/ barometric pressure and temperature/humidity trend

 The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoors) are

shown in the LCD display.

WS6210 User Manual

 After successfully connecting with the outdoor sensor, the weather station can display the outdoor

temperature/humidity and the temperature/humidity trend (outdoor)

 You may see the following displays:

The temperature/humidity is rising.

The temperature/humidity is remaining constant.

The temperature/humidity is falling.

RF Transmission Procedure:

 The weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature

& humidity after batteries inserted.

 The outdoor sensor will automatically transmit temperature and humidity signal to the Weather Station after batteries

inserted.

 If Weather Station failed to receive transmission from outdoor sensor (“- -”display on the LCD), press and hold “-”

button for 3 seconds to receive transmission manually. RF icon “ ” flashes on the LCD，The Weather Station to receive

the outdoor sensor.

Maximum/Minimum Temperature/Relative Humidity

 To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “MEM” button:

Once to show the maximum temperature and humidity values.

Twice to sow the minimum temperature and humidity values

Three times to return to the current temperature and humidity levels

 To reset the maximum and minimum temperature and humidity, press and hold down the “MEM” button about 2

seconds. This will reset all minimum and maximum data recorded to the current displayed values.

F.Y.I.:

 If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above ranges, the

HH.H will be displayed.

Outdoor Temperature alert setting

 Press and hold down the “ ” button for 2 seconds until the icon for the Temperature Alert” starts to flash

 The icon of Upper limit of the Temperature alarm starts to flash. Use the “+” and “-” buttons to set the required

WS6210 User Manual

maximum temperature. Press “ ” to confirm your setting.

 The icon of the Lower limit of the Temperature alarm starts to flash. Use the “+” and “-” buttons to set the required

minimum temperature. Press “ ” button to confirm your setting and to end the setting procedure

Temperature and frost alert

 Press “ ” button to activate or deactivate the remote temperature alert, When the remote temperature alarm is

activated, the temperature alarm icon is displayed in the remote sensor bar

 When the remote channel temperature value exceeds the set temperature range, will activate the alarm, the weather

station will every minute continuous alarm 5 times, at the same time, temperature alarm in alarm icon “ ” flashes,

its temperature value and alarm upper limit icon “Hi” or lower limit icon “Lo” also flashes

 When the temperature of outdoor sensor is –1°C (+30°F) to + 3°C (+ 37°F), the frost alarm will be activated, the frost

alert icon “ ” flashing.

F.Y.I.:

 When the temperature is higher than the upper limit of the alarm temperature setting, the activation of the upper limit

alarm, symbol “Hi” flashing,

 When the temperature is lower than the lower limit of the alarm temperature, the lower limit alarm is activated, and the

symbol “Lo” flashes

Low battery:

If the battery icon “ ” appears the batteries in the outdoor sensor should be replaced as soon as possible.

The weather forecast:

 The weather station calculates a weather forecast for about the next 12 hours based on the barometric pressure trend.

Of course this forecast can‘t compare to that of professional weather services supported by satellites and high

performance computers, but merely provides an approximate indication of current developments. Please take the

weather forecast from your local weather forecasting service into account as well as the forecast from your weather

station. If there are discrepancies between the information from your device and from the local weather forecasting

service, please take the advice of the latter as authoritative.

 The weather station displays the following weather icon:

WS6210 User Manual

sunny slightly cloudy cloudy rainy Heavy rainy Snowy

 The weather station can display the barometric pressure trend.

 You may see the following displays:

The barometric pressure will rise.

The barometric pressure will remain constant.

The barometric pressure will fall.

Background lighting

 Touch the “ ” field or press the “ ” button. Backlight lit 15 seconds.

LIABILITY DISCLAIMER：

•The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or

in unauthorized grounds strongly damages the environment.

•Please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective

collection.

•All electronic instruments must from now on be recycled. User shall take an active part in the reuse, recycling and

recovery of the electrical and electronic waste.

•The unrestricted disposal of electronic waste may do harm on public health and the quality of environment.

•As stated on the gift box and labeled on the product, reading the “User manual” is highly recommended for the benefit

of the user. This product must however not be thrown in general rubbish collection points.

•The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that

occur should an inaccurate reading take place.

•This product is designed for use in the home only as indication of the temperature.

•The plug on the power adapter (if included) is intended to serve as the disconnect device, the socket-outlet shall be

installed near the equipment and shall be easily accessible.

•This product is not to be used for medical purposes or for public information.

Tabla de contenidos

Otros manuales de Estación meteorológica de La Crosse Technology

La Crosse Technology

La Crosse Technology C87214 Guía de instalación

La Crosse Technology

La Crosse Technology WS-2310TWC Manual de usuario

La Crosse Technology

La Crosse Technology WS6827 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2812U-IT Manual de usuario

La Crosse Technology

La Crosse Technology V50EU Guía de instalación

La Crosse Technology

La Crosse Technology 308-1451H Manual de usuario

La Crosse Technology

La Crosse Technology 308-1412-3TX Manual de usuario

La Crosse Technology

La Crosse Technology V15 Manual de usuario

La Crosse Technology

La Crosse Technology 330-2315 Manual de usuario

La Crosse Technology

La Crosse Technology S77925 Dimensiones

La Crosse Technology

La Crosse Technology 308-1416v2 Manual de usuario

La Crosse Technology

La Crosse Technology WS-8035 Manual de usuario

La Crosse Technology

La Crosse Technology WA-1030U Manual de usuario

La Crosse Technology

La Crosse Technology WS-7025U Manual de usuario

La Crosse Technology

La Crosse Technology V16 Manual de usuario

La Crosse Technology

La Crosse Technology WS-9047UIT-CA Manual de usuario

La Crosse Technology

La Crosse Technology WS-7047U Manual de usuario

La Crosse Technology

La Crosse Technology 328-1414BW Manual de usuario

La Crosse Technology

La Crosse Technology V21-WTHV3 Manual de usuario

La Crosse Technology

La Crosse Technology WS2307 Manual de usuario

La Crosse Technology

La Crosse Technology WS-8158U-IT Manual de usuario

La Crosse Technology

La Crosse Technology S88785 Manual de usuario

La Crosse Technology

La Crosse Technology WS-7213U Manual de usuario

La Crosse Technology

La Crosse Technology WS-2813U-IT Hoja de especificaciones

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario

TFA

TFA 30.3013.IT Manual de usuario

Alecto

Alecto WS-1200 Manual de usuario

Oregon Scientific

Oregon Scientific RMR966PA Manual de usuario