La Crosse Technology WS-9025U Manual de usuario

even in excerpts, or duplicated or processed using electronic,

mechanical or chemical procedures without written permission of the

publisher.

This handbook may contain mistakes and printing errors. The

information in this handbook is regularly checked and corrections made

in the next issue. We accept no liability for technical mistakes or

printing errors, or their consequences.

All trademarks and patents are acknowledged.

FCC ID: OMO-01RX (receiver), OMO-01TX (sensor)

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL

INTERFERENCE, AND

2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

WS-9025U

WEATHER PROJECTION STATION

POSTE METEO A PROJECTION

ESTACION CON PROYECCIÓN DEL ESATDO

DEL TIEMPO

Instruction Manual

Mode d’emploi

Manual de Instrucciones

Battery

compartment

LCD

Display

Function

keys

WEATHER PROJECTION STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather

projection station as an example of innovative design and quality

piece of engineering. Providing radio controlled time, date,

calendar, moon phase, indoor and outdoor temperature, indoor and

outdoor relative humidity, this unit will never keep you guessing on

current and future weather conditions. Operation of this product is

simple and straightforward. By reading this operating manual, the

user will receive a better understanding of the weather projection

station together with the optimum benefit of all its features.

FEATURES:

The Weather Projection Station

Projector

Function

SNOOZE

key

•WWVB Radio controlled time with manual setting option

•Time reception ON/OFF (user selectable)

•12/24 hour time display

•DST ON/OFF (daylight saving time)

•US time zone map

•Time zone option ±12 hours

•Month, date, weekday calendar display

•Alarm setting with snooze function

•Automatic daylight saving time

•Display 12 moon phases throughout the year with moon/tide indication

•Weather forecasting with 3 weather icons

•Weather tendency indicator

•Indoor comfort indicator

•Temperature display with MIN/MAX records and time of reception

•Indoor and outdoor temperature display in ºC/ºF

•Humidity data with MIN/MAX records

•Indoor and outdoor humidity display as RH%

•Can receive up to 3 sensors

•Time projection display (hour and minute)

•Outdoor temperature projection display (degrees ºC or ºF)

•Alternate projection display mode selectable

•Projection with adjustable projection orientation

•LCD contrast selectable

•LED back light

•Low battery indicator

•Table standing

•AC/DC power adapter included

The Outdoor Thermo-hygro Sensor

•Remote transmission of outdoor temperature and humidity to Weather

Projection Station by 433 MHz

•Rain proof casing

•Wall mounting case

Rain protection

cover

Wall mounting

base

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

PROJECTION STATION

The Weather Projection Station uses 3 x AA,

IEC LR6, 1.5V batteries. To install and

replace the batteries, please follow the steps

below:

1. Insert finger or other solid object in

the space at the bottom center of the

battery compartment and lift up to

remove the cover.

2. Insert batteries observing the correct

polarity (see marking).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-

HYGRO SENSOR

The Thermo-hygro sensor uses 2 x AA, IEC LR6, 1.5V batteries. To install and

replace the batteries, please follow the steps below:

1. Remove the battery cover.

2. Insert the batteries, observing the correct

polarity (see marking).

3. Replace the battery cover on the unit.

Note:

In the event of changing batteries in any of the units,

all units need to be reset by following the setting up

procedures. This is due to a random security code

assigned by the sensor at start-up. This code must be

received and stored by the Weather Projection Station

in the first 3 minutes of power being supplied to the

sensor.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to

ensure optimum accuracy of these units.

Please participate in the preservation of the environment.

Return used batteries to an authorized depot.

SETTING UP

The Weather Projection Station can be either batteries-operated or

BATTERY INSTALLATION:

1. First, insert the batteries into the Weather Projection Station (see “To

install and replace batteries in the Weather Projection Station”).

Once the batteries are in place, all segments of the LCD will light up

briefly and a short signal tone will sound. Then the ALM1 6:00, the indoor

temperature and humidity, the time as 12:00, the date as WE 1.1., the

moon icon, the weather icons (sun and clouds) will be displayed. If the

indoor temperature and indoor humidity are not displayed after 15

seconds, remove the batteries and wait for at least 3 minutes before

reinserting them. Once the indoor data is displayed proceed to step 2.

2. Within 4 minutes of activating the Weather Projection Station, place the

batteries into the sensor (see “To install and replace batteries in the

Thermo-hygro Sensor“).

3. After inserting the batteries into the sensor, the Weather Projection

Station will start receiving data from the sensor. The outdoor temperature

and humidity should then be displayed on theWeather Projection Station.

If this does not happen after 3 minutes, the batteries will need to be

removed from both units and reset from step 1.

4. The Weather Projection Station can receive up to 3 remote Outdoor

Thermo-hygro sensors. If you have purchased additional sensors, repeat

from step 3 for all extra sensors. However, ensure that you leave 10

seconds in between the reception of the last sensor and the set-up of the

following sensor. The Weather Projection Station will number the sensors

in the order of set-up, i.e. the first sensor will have the

temperature/humidity displayed with the number 1 against it and so on.

5. With less than 3 sensors received, the Weather Projection Station will try

to pick up the remaining one in approximately another 3 minutes. If 3

sensors are received, the Weather Projection Station will stop further

reception.

6. Once the outdoor temperature and the humidity have been received and

displayed on the Weather Projection Station, the WWVB time code

reception is automatically started. This takes typically between 6-8

minutes in good conditions.

7. If after 10 minutes, the WWVB time has not been received, use the SET

key to manually enter a time initially. The clock will automatically attempt

to receive the WWVB time from 12:00 to 6:00 a.m. for a successful

reception. When WWVB reception signal is successful, the received time

will override the manually set time. The date is also updated with the

received time. The next reception attempt will occur on the following day.

(Please refer to notes on “About WWVB Radio controlled Time” and

“Manual Time Setting”).

Your Weather Projection Station is now operational!

Note:

If the batteries are used as the main power source:

1. Projected image brightness, alarm volume and back-light strength will

be weaker when batteries are low

2. Battery life time will be much less than 1 year; depending on the

frequency of projection and alarm.

TO USE THE PROJECTOR POWER ADAPTER

The unit comes with an AC-DC adapter for using the projector for an extended

period of time, such as throughout the night.

To connect the AC-DC adapter:

Important!

Make sure that your household voltage is 120V! Otherwise it can result in

damaging your Weather Projection Station.

1. Connect the AC-DC adapter to a wall socket. Plug the adapter into the

jack at the side of the Weather Projection Station. All segments of the

LCD will light up briefly and a short signal tone will sound. Then the

ALM 1 6:00, the indoor temperature and humidity, the time as 12:00,

the date as WE 1.1., the moon icon, the weather icons (sun and clouds)

will be displayed. If the indoor temperature and indoor humidity are not

displayed after 15 seconds, remove the batteries and wait for at least 3

minutes before reinserting them.

2. Within 4 minutes of activating the Weather Projection Station, place the

batteries into the sensor (see “To install and replace batteries in the

Thermo-hygro Sensor“).

3. After inserting the batteries into the sensor, the Weather Projection

Station will start receiving data from the sensor. The outdoor

temperature and humidity should then be displayed on the Weather

Projection Station. If this does not happen after 3 minutes, the batteries

will need to be removed from both units and reset from step 1.

4. The Weather Projection Station can receive up to 3 remote Outdoor

Thermo-hygro sensors. If you have purchased additional sensors,

repeat from step 3 for all extra sensors. However, ensure that you leave

10 seconds in between the reception of the last sensor and the set-up

of the following sensor. The Weather Projection Station will number the

sensors in the order of set-up, i.e. the first sensor will have the

temperature/humidity displayed with the number 1 against it and so on.

5. With less than 3 sensors received, the Weather Projection Station will

try to pick up the remaining one in approximately another 3 minutes. If

3 sensors are received, the Weather Projection Station will stop further

reception.

6. Once the outdoor temperature and the humidity have been received

and displayed on the Weather Projection Station, the WWVB time code

reception is automatically started. This takes typically between 6-8

minutes in good conditions.

7. If after 10 minutes, the WWVB time has not been received, use the SET

key to manually enter a time initially. The clock will automatically

attempt to receive the WWVB time from 12:00 to 6:00 a.m. for a

successful reception. When WWVB reception signal is successful, the

received time will override the manually set time. The date is also

updated with the received time. The next reception attempt will occur on

the following day. (Please refer to notes on “About WWVB Radio

controlled Time” and “Manual Time Setting”).

Your Weather Projection Station is now operational!

Note:

If the Weather Projection Station is powered through the AC-DC adapter, the

projection will be constantly ON.

If the Weather Projection Station is battery operated, only when the SNOOZE

key is pressed, the projection will turn ON. Once the SNOOZE key is released,

there will be no projection.

USING BOTH BATTERIES THE POWER ADAPTOR

If the Weather Projection Station is first powered by batteries and the AC-DC

adapter is subsequently used for extended period of time, the main power

source of the Weather Projection Station will switch to AC power. The

batteries will then act as a backup power source in the case of power failure.

RESETTING

The Weather Projection Station and the Thermo-hygro sensor need to be

reset when one of the following conditions occur:

•Unsuccessful 433MHz signal reception.

•Malfunction on the units.

•Batteries replacement.

For resetting, remove all batteries from the units and unplug the AC-DC

adapter from any power source. Wait at least for 3 minutes before powering

up the Weather Projection Station again. Proceed from step 1 in “Setting

Up”,“Battery Installation” or “How to use the Projector Adaptor”.

HOW TO USE THE PROJECTOR

The projector projects the current time and the current outdoor temperature

onto the ceiling, preferable within a darkened room. The projection image

can also be adjusted in 4 upright positions, each with a rotation of 90º by

using the key .

TO PROJECT THE TIME OR TEMPERATURE ONTO A FLAT

SURFACE:

The projector will only project the current time, outdoor temperature or

alternate between time/outdoor temperature only.

1. Point the projection lens to the appropriate direction (maximum distance

of the projection is 6 feet/2 meters).

2. Press the DISPL key to select the desired mode for the projection.

There are 3 display modes:

M0 – projecting the current time only.

M1 – projecting the current outdoor temperature only.

M2 – projecting by switching the display of the current time and the

current outdoor temperature for every 5 seconds.

3. Adjust the projection image in an upright position with the key.

Note:

If more than one Thermo-hygro Sensor is used, only the temperature from

sensor 1 will be projected.

Note:

The projection brightness is not adjustable as it is constantly set at its brightest

level.

ABOUT WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology—Time and

Frequency Division) WWVB radio station is located in Ft. Collins, Colorado,

and transmits the exact time signal continuously throughout the United States

at 60 kHz. The signal can be received up to 2,000 miles away through the

internal antenna in the Weather Projection Station. However, due to the nature

of the Earth’s Ionosphere, reception is very limited during daylight hours. The

Weather Projection Station will search for a signal every night when reception

is best.

The WWVB radio station receives the time data from the NIST Atomic clock in

Boulder, Colorado. A team of atomic physicists is continually measuring every

second, of every day, to an accuracy of ten billionths of a second per day.

These physicists have created an international standard, measuring a second

LARM 1 ke

HOUR/IN key MIN/OUT key

LARM 2 ke

DIRECTION key

SET key CH/+ key

DISPL key

SNOOZE key

as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. For more

detail, visit http://www.boulder.nist.gov/timefreq.htm. To listen to the NIST

time, call (303)499-7111. This number will connect you to an automated time,

announced at the top of the minute in “Coordinated Universal Time”, which is

also known as Greenwich Mean Time (GMT). This time does not follow

Daylight Saving Time changes. After the top of the minute, a tone will sound

for every second. It is possible that your Weather Projection Station may not

be exactly on the second due to the variance in the quartz. However, the clock

will adjust the quartz timing over the course of several days to be very

accurate; under 0.10 seconds per day.

FUNCTION KEYS:

Weather Projection Station:

The Weather Projection Station has 9 easy to use function keys; 4 on the

front, 4 on the back, and 1 on the top of the unit:

SET key

•Enter manual setting modes: LCD contrast, time zone, DST ON/OFF,

Time reception ON/OFF, 12/24 hour display, manual time setting,

calendar, snooze function, temperature °F or °C, and weather icon

sensitivity setting

•Stop the alarm during alarm ringing

•Stop snooze mode

•Back-light on

CH/+ key

•Increase value in all setting modes

•Stop the alarm during alarm ringing

•Toggle between the outdoor sensor 1, 2 and 3 (if more than 1 sensor is

used)

•Stop snooze mode

•Back-light on

Key (DIRECTION key)

•Project the image direction (can display 4 different orientations)

•Back-light on

DISPL key

•Toggle between the time and outdoor temperature or automatic

alternates time/outdoor temperature every 5 seconds display mode for

projection

•Back-light on

ALARM 1 key

•Enter/exit the alarm 1 setting mode

•Active/de-active the alarm time 1 (even inside snooze mode)

•Stop the alarm during alarm ringing

•Back-light on

HOUR/IN key

•Press to set the alarm hour (inside alarm setting mode)

•Press shortly to toggle between MIN/MAX and current indoor

temperature and humidity data

•Press and hold for 4 seconds to reset the MIN/MAX indoor temperature

and humidity data

•Stop the alarm during alarm ringing

•Stop snooze mode

•Back-light on

Otros manuales para WS-9025U

Tabla de contenidos

Otros manuales de Estación meteorológica de La Crosse Technology

La Crosse Technology

La Crosse Technology WS-7013U Manual de usuario

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-9043U Manual de usuario

La Crosse Technology

La Crosse Technology 308-1414M Manual de usuario

La Crosse Technology

La Crosse Technology WS-9730U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-7013U Manual de usuario

La Crosse Technology

La Crosse Technology 308-145 Manual de usuario

La Crosse Technology

La Crosse Technology V30 Dimensiones

La Crosse Technology

La Crosse Technology 308-1451 Manual de usuario

La Crosse Technology

La Crosse Technology Wireless Weather Station Manual de usuario

La Crosse Technology

La Crosse Technology WS-9037U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-2810U-IT Hoja de especificaciones

La Crosse Technology

La Crosse Technology WS-9066U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-2812U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-8025SU Manual de usuario

La Crosse Technology

La Crosse Technology C85845 Manual de operación y mantenimiento

La Crosse Technology

La Crosse Technology 308-1416 Manual de usuario

La Crosse Technology

La Crosse Technology WS-9250U-IT Manual de usuario

La Crosse Technology

La Crosse Technology 308-1417 Manual de usuario

La Crosse Technology

La Crosse Technology CA76669 Dimensiones

La Crosse Technology

La Crosse Technology C75747-AU Manual de usuario

La Crosse Technology

La Crosse Technology WS-9046U Manual de usuario

La Crosse Technology

La Crosse Technology WS-9047UIT-CA Manual de usuario

La Crosse Technology

La Crosse Technology S84060 Manual de usuario

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario

TFA

TFA 30.3013.IT Manual de usuario

Alecto

Alecto WS-1200 Manual de usuario

Oregon Scientific

Oregon Scientific RMR966PA Manual de usuario