La Crosse Technology WS-9020U Manual de usuario

WS-9020U 915MHZ

INTELLIGENT WEATHER STATION

Instruction Manual

FEATURES

INTELLIGENT WEATHER STATION

INSTANT TRANSMISSION is the state-

of-the-art new wireless transmission

technology, exclusively designed and

developed by LA CROSSE

TECHNOLOGY. INSTANT

TRANSMISSION offers you an

immediate update (every 4 seconds!) of

all your outdoor data measured from

the transmitters: Chart the weather as it

happens!

This product offers:

Hanging hole

Battery

compartment

LCD

Display

Function Keys Removable Stand

Weather

information

text

•Immediate update (every 4 seconds!) of all your outdoor data

measured from the transmitters (note: 4 second may vary while

updating)

•WWVB Radio-controlled time with manual setting option

•WWVB reception ON/OFF (user selectable)

•12/24 hour time display

•Time zone option ±12 hours

•Calendar display (weekday, date, month, year)

•Weather forecasting with 4 weather icons and weather tendency

indicator

•Temperature display in °F/ºC

•Humidity display as RH%

•Indoor temperature and humidity display with MIN/MAX and

time/date of recording

•Outdoor temperature and humidity display with MIN/MAX and

time/date of recording

•Low/High outdoor temperature alarm

•Relative air pressure unit in hPa or inHg

•Air pressure tendency indicator for last 12h (bar graph format)

•“Intelligent” weather information display

•Can receive up to 3 remote transmitters

•LCD contrast selectable

•Low battery indicator

•Display in 5 languages selectable: English, German, French, Italian

and Spanish

•Wall mounting or free standing

REMOTE TEMPERATURE/HUMIDITY SENSOR

•Remote transmission of outdoor temperature and

humidity to the intelligent weather station by 915

MHz signal

•Weather resistant casing

•Wall mounting case

•Mount in a sheltered place. Avoid direct rain and

sun.

QUICK SET-UP GUIDE

Hint: Use good quality Alkaline Batteries and avoid

rechargeable batteries.

1. Have the intelligent weather station and remote

temperature/humidity sensor 3 to 5 feet apart.

2. Batteries should be out of both the intelligent weather station and

remote temperature/humidity sensor units for 10 minutes.

3. Place the batteries into the remote temperature/humidity

sensor first and then into the intelligent weather station.

4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the intelligent weather station and remote

temperature/humidity sensor will begin to communicate with each other

and the display will show the temperature/humidity, outdoor

temperature/humidity. If the intelligent weather station does not display

all information after the 15 minutes, please retry the set up as stated

above. After all information has been displayed for 15 minutes you can

place your sensors outdoors and set your time.

Important Notes on Set-up and Operation

•The remote temperature/humidity sensor should be placed in a

dry, shaded area.

•Fog and mist will not harm your remote temperature/humidity

sensor but direct rain must be avoided.

•The remote temperature sensor should be placed in a dry,

shaded area. The remote temperature sensor has a range of 330

feet. Keep in mind that the 330 feet is in open air with no

obstructions and that radio waves DO NOT curve around objects.

Actual transmission range will vary depending on what is in the

path of the signal. Each obstruction (roof, walls, floors, ceilings,

thick trees, etc.) will effectively cut signal range in half.

Example: A wireless weather station receiver with a 330 feet

range is mounted on an interior wall, so that the signal has to pass

through one interior wall, one exterior wall, and across the 10 foot

width of the room between the 2 walls. The first wall will reduce

the range to 165 feet, and the second wall will reduce the range to

87 feet. Factoring in the 10 foot room, this leaves a maximum of

77 feet of remaining signal range.

This allowance is typically enough for a frame wall with non-

metallic siding; however certain materials can reduce range even

further. Metal siding, stucco, and some types of glass can reduce

signal range by as much as ¾ or more, compared to the ½

reduction typical of most obstructions. It is possible to receive a

signal through these materials, however maximum range will be

much less due to their tendency to absorb or reflect a much larger

portion of the sensor’s signal.

•The remote temperature/humidity sensor transmits a signal every

4 seconds – with variations during updating periods. After the

batteries have been installed, the intelligent weather station will

search for the signal for the duration of 45 seconds. If there is no

temperature or humidity reading in the OUTDOOR LCD after 5

minutes, make sure the units are within range of each other, or

repeat the battery installation procedure.

•If a button is pressed before the intelligent weather station

receives the signal from the remote temperature/humidity sensor,

you will need to follow the battery installation procedure again.

To complete the set up of your new wireless intelligent weather station

after the 5 minutes have passed, please follow the steps in the “Manual

Settings” section.

Note:

If the outdoor transmitter signal reception is not successful on the first

frequency of 915MHz for 45 seconds, the frequency is changed to

920MHz, and the learning is tried for another 45 seconds. If it is still not

successful the reception is tried for 45 seconds on 910MHz. This will

also be done during re-synchronization.

BATTERY INSTALLATION

INTELLIGENT WEATHER STATION

The intelligent weather station uses 3 x

AA (alkaline recommended) batteries.

When the batteries need to be

replaced the low battery symbol will

appear on the LCD (or replace the

batteries annually). To install and

replace the batteries, please follow the

steps below:

1. Remove the cover.

2. Insert batteries observing the

correct polarity (see battery

compartment marking).

3. Replace battery cover.

REMOTE TEMPERATURE/HUMIDITY SENSOR

The remote temperature/humidity sensor uses 2 x AA

(alkaline recommended) batteries. To install and

replace the batteries, please follow the steps below:

1. Remove the battery cover at the front side with a

small screwdriver.

2. Insert the batteries, observing the correct polarity

(see battery compartment marking).

3. Replace the battery cover on the unit.

Note:

When changing the batteries in any of the units, all units need to be

reset by following the “Quick Set Up Guide” procedures. This is because

a random security code is assigned by the transmitter at start-up, and

this code must be received and stored by the intelligent weather station

in the first few minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual

basis to ensure optimum accuracy of these units.

Please participate in the preservation of the environment.

Return used batteries to an authorized facility.

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technology—Time and

Frequency Division) WWVB radio station is located in Ft. Collins,

Colorado, and transmits the exact time and date signal continuously

throughout the United States at 60 kHz. The signal can be received up

to 2,000 miles away through the internal antenna in the intelligent

weather station. However, due to the nature of the Earth’s Ionosphere,

reception is very limited during daylight hours. The intelligent weather

station will search for a signal every night when reception is best. The

WWVB radio station derives its signal from the NIST Atomic clock in

Boulder, Colorado. A team of atomic physicists is continually measuring

every second, of every day, to an accuracy of ten billionths of a second

per day. These physicists have created an international standard,

measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom

in a vacuum. For more information on the atomic clock and WWVB

please see the NIST website at

http://www.boulder.nist.gov/timefreq/stations/wwvb.htm.

FUNCTION KEYS

Intelligent weather station:

The intelligent weather station has 5 easy to use function keys on the

right side of the unit.

SET key

MAX/+ key

CH key

MIN/- key

LARM ke

SET key

•Press and hold the key to enter manual setting modes: LCD

contrast, 12/24 hour time display, time zone, daylight saving time

ON/OFF, manual time setting, calendar, WWVB ON/OFF, ºF/ºC

temperature unit, pressure unit, relative pressure setting and

language display

•Confirm weather alarm in the setting mode

•Reset individual MIN/MAX temperature/humidity record

•Turn weather alarm off when sounding

!<deleted bullet>!

CH key (Channel key)

•Select channel 1, 2, or 3 (if more than 1 transmitter is used)

•Exit setting mode

•Detect/Re-detect transmitter’s signal for all channels

•Turn weather alarm off when sounding

MAX/+ key

•Display MAX indoor / outdoor temperature and humidity records

with time of recording

•Increase all values in manual setting modes

•Increase the weather alarm values

•Turn weather alarm off when sounding

•Reset max/min record

MIN/- key

•Display MIN indoor and outdoor temperature and humidity records

with time of recording

•Decrease all values in manual setting modes

•Decrease the weather alarm values

•Turn weather alarm off when sounding

•Reset max/min record

ALARM key

•Enter the weather alarm time setting mode

•Set next weather alarm in weather alarm setting mode

LCD SCREEN

The LCD screen is split into 6 sections displaying the information for

outdoor data, indoor data, time and date, weather forecast, air pressure

and air pressure history, weather information display.

ir pressure

tendency Relative air

Outdoor

temperature

in °F or ºC

Indoor relative

humidity in

RH%

Indoor Temperature

in °F or ºC

Outdoor

transmitter

identification

number

Calendar

display

WWVB reception icon

(for WWVB time)

Weather

forecast icon

Time

display

Outdoor relative

humidity in

RH%

Signal reception

icon*

*When the signal from the remote temperature/humidity sensor is

successfully received by the intelligent weather station, this signal

reception will be switched on. (If not successful, the icon will not be

shown on LCD) So the user can easily see whether the last reception is

successful (icon on) or not (icon off). On the other hand, the short

blinking of the icon shows that reception is currently taking place.

MANUAL SETTINGS

The following manual settings can be changed when pressing and

holding the SET key for approximately 4 seconds:

•LCD contrast setting

•12/24 hour time display

•Time zone setting

•Daylight time saving ON/OFF

•Manual time setting

•Calendar setting

•WWVB time reception ON/OFF setting

•°F/°C temperature unit setting

•Air pressure unit setting

•Relative pressure value setting

•Language display setting

LCD CONTRAST SETTING

The LCD contrast can be set within 8 levels, from LCD 1 to LCD8

(default setting is LCD 5):

1. Press and hold the SET key for about 4 seconds until the digit

start flashing.

2. Use the MAX/+ or MIN/- key to view all levels of contrast.

3. Select the desired LCD contrast. Press and release the SET key

to confirm selection and to enter the 12/24 Time Display setting.

12/24 HOUR TIME DISPLAY SETTING:

The time display can be set to view time in 12 or 24 hour format. The

default time display mode is “12h”. To set to “24h” time display:

1. Use the MAX/+ or MIN/- key to toggle the value.

2. Press and release the SET key to confirm selection and to enter

the Time Zone setting.

TIME ZONE SETTING

The time zone can be set ±12 hour. The default time zone is set to

Eastern Time zone (“EST”). To set a different time zone:

1. The current time zone value starts flashing.

Last digit flashing

Digit flashing

Otros manuales para WS-9020U

Tabla de contenidos

Otros manuales de Estación meteorológica de La Crosse Technology

La Crosse Technology

La Crosse Technology Bonus Station Manual de usuario

La Crosse Technology

La Crosse Technology 308A-146 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2811U-IT Manual de usuario

La Crosse Technology

La Crosse Technology C85845 Manual de usuario

La Crosse Technology

La Crosse Technology WD-3102U Manual de usuario

La Crosse Technology

La Crosse Technology V21-WTHv2 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2010 Guía de inicio rápido

La Crosse Technology

La Crosse Technology WS6868 Manual de usuario

La Crosse Technology

La Crosse Technology WS-1913U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-7013U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-1612 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2811U Manual de usuario

La Crosse Technology

La Crosse Technology WS-1516U-IT Manual de usuario

La Crosse Technology

La Crosse Technology C80758-AU Manual de usuario

La Crosse Technology

La Crosse Technology WS-8120U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-2812-IT Hoja de especificaciones

La Crosse Technology

La Crosse Technology C85845v4 Manual de usuario

La Crosse Technology

La Crosse Technology WS-9009BK-IT Dimensiones

La Crosse Technology

La Crosse Technology V42-AU Manual de usuario

La Crosse Technology

La Crosse Technology T85647 Manual de usuario

La Crosse Technology

La Crosse Technology WS-9630U-IT-CA Manual de usuario

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Manual de usuario

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Manual de usuario

La Crosse Technology

La Crosse Technology WS-7059U4 Manual de usuario

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario

TFA

TFA 30.3013.IT Manual de usuario

Alecto

Alecto WS-1200 Manual de usuario

Oregon Scientific

Oregon Scientific RMR966PA Manual de usuario