La Crosse Technology WS6158-IT Manual de usuario

LCD2

display

Battery cover

LCD1

display

Hanging holes

Foldable stand

WEATHER WALL CLOCK

Instruction Manual

FEATURES:

WEATHER WALL CLOCK:

• DCF-77 Radio controlled time with manual setting option

• 24 hour time display

• Time display: hour, minute, second

• Alarm setting with snooze function

• Calendar display

• Weekday display (3 languages to choose from: German, English, and French)

Function keys

« Instant Transmission+» is the up and coming state-of-the-art new wireless

transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the

transmitters: follow your climatic variations in real-time!

• Weather forecasting with 3 weather icons

• Weather tendency indicator

• Time zone setting

• ºC or ºF temperature display selectable

• Indoor temperature display

• Outdoor temperature display via 868MHz transmission

• Low battery indicator

• Signal reception intervals at 4-second

• Wall mount or freestanding

OUTDOOR TEMPERATURE TRANSMITTER:

• Remote transmission of outdoor temperature to Weather Station

by 868 MHz

• Wall mounting case

• Mounting at a sheltered place. Avoid direct rain and sunshine

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER WALL CLOCK

The weather wall clock uses 2 x AA, IEC LR6, 1.5V

batteries. To install and replace the batteries, please

follow the steps below:

1. Insert finger or other solid object in the space at

the bottom center of the battery compartment and

lift up to remove the cover.

2. Insert batteries observing the correct polarity (see

marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER

The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and

replace the batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking

inside battery compartment).

3. Replace the batterycover on the unit.

Alkaline batteries are recommended for use in both units. Avoid

using rechargable batteries.

SETTING UP:

1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and

replace batteries in the Temperature Transmitter” above).

2. Within 3 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather wall clock as

indicated above (see "To install and replace batteries in the Weather wall clock“

above).

3. Once the batteries are in place, all segments of the LCD will light up briefly and a brief

beep sound will be hear. Then the indoor temperature “OF” and outdoor temperature - - -,

the time as 0:00, the date as 1/1, and weekday will be displayed.

4. Do not press any buttons for 10 minutes

5. The Weather wall clock will start receiving data from the transmitter. The remote

temperature will then be displayed on the Weather wall clock. If the outdoor temperature

is not displayed 90 seconds after inserting the batteries into the receiver, all batteries are

needed to be removed and wait for at least 1 minute for reset from step 1.

6. The DCF time code reception will automatically start. This takes typicallybetween 3 - 5

minutes in good conditions. This time period is an excellent opportunity to locate the

transmitter in suitable location outdoors. In order to ensure sufficient 868MHz

transmission however, this should under good conditions be no more than 100 meters

from where the Weather wall clock will be finally positioned (see notes on “Positioning”

and “868MHz Reception”).

7. If after 10 minutes the DCF time has not been received, use the SET key to enter into the

set mode and change either the time or date in order to activate the DCF reception. The

clock will then automatically attempt to receive the DCF time. When this is successful,

the received time will override the manually set time. The date is also updated with the

received time (Please refers to notes on “DCF Radio controlled time” and “Manual time

setting”).

Note:

In the event of changing batteries of the unit ensure that the batteries do not spring free from

the contacts. Always wait at least 1 minute after removing the batteries before reinserting,

otherwise start up and transmission problems may occur.

RADIO CONTROLLED TIME:

The time base for the radio controlled time is a Cesium Weather wall clock operated by the

Physikalisch Technische Bundesanstalt Braunschweig, which has a time deviation of less than

one second in one million years. The time is coded and transmitted from Mainflingen near

Frankfurt via frequencysignal DCF-77 (77.5 kHz) and has a transmitting range of

approximately1,500 km. Your radio-controlled Weather Station receives this signal and

converts it to show the precise time in summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal cases, there

should be no reception problems within a 1500km radius of Frankfurt.

Once the outdoor temperature is displayed on the Weather station, the DCF tower icon in the

clock display will start flashing in the upper left corner. This indicates that the clock has

detected that there is a radio signal present and is trying to receive it. When the time code is

received, the DCF tower becomes permanently lit and the time will be displayed.

Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not

successful, then at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If

the reception at 06:00 is still not successful, then the next trytakes place at 02:00 next day.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,

then please take note of the following:

• Recommended distance to any interfering sources like computer monitors or TV sets is a

minimum of 1.5 - 2 metres.

• Within ferro-concrete rooms (basements, superstructures), the received signal is

naturally weakened. In extreme cases, please place the unit close to a window and/ or

point its front or back towards the Frankfurt transmitter.

Weekday

DCF time

Indoor temperature

Weather forecast and weather tendency indicator

• During nighttime, the atmospheric disturbances are usually less severe and reception is

possible in most cases. A single daily reception is adequate to keep the accuracy

deviation below 1 second.

FUNCTION KEYS

The weather wall clock has four easy to use keys:

SET key : To enter into the set mode for the following setting: Time zone, language,

hour, minute, year, month, day, weekday, ºC or ºF temperature display.

To stop the snooze function

To exit the setting mode

+key : To toggle between the date, alarm time, seconds display.

To change the values in manual set mode

To stop the snooze function

ALM key : To enter into the alarm set mode

To set the alarm ON/OFF

To exit the alarm setting mode

SNZ key : To activate the snooze function during alarm

To exit the setting mode

WEATHER WALL CLOCK LCD SCREEN DESCRIPTIONS

The weather wall clock's LCD is divided into 2 sections and once the batteries are inserted, all

the segments will light up briefly before displaying the information for time, date, indoor and

outdoor temperatures.

Date

Outdoor temperature

Radio reception icon

Alarm icon

Low battery icon

(wall clock)

Low battery icon

(transmitter)

Outdoor

reception signal

MANUAL SETTINGS

Note:

If the weather wall clock has already successfully received the DCF time signal and

displays the correct time and date, then the Manual settings can be skipped.

After completion of the above described procedures in “Setting up”, the manual setting modes

can be entered bypressing the SET key. The following settings can now be programmed:

• Time zone setting

• Language display setting

• Manual time setting

• Year setting

• Month setting

• Day setting

• Weekday setting

• ºC or ºF setting

TIME ZONE SETTING

After entering the manual setting mode as described above, the time zone can be set between

the 0 to -12 hour and then runs from 12 back to 0 in consecutive 1-hour interval. To do this:

1. The current time zone value starts flashing.

2. Use the + key to set the time zone. The range runs from 0 to -12 and then runs from 12

back to 0 in consecutive 1-hour interval.

3. Press and release the SET key to enter the “Language Setting”.

LANGUAGE SETTING

The weekday can be displayed in LCD2 with the pre-set languages: US English, German, and

French. (default language: German)

1. Set the desired language for the weekday display in LCD 2 by use of the + key.

2. Press and release the SET key to enter the mode “Manual Time Setting”.

MANUAL TIME SETTING

In case the weather wall clock is not able to detect the DCF-signal (disturbances, transmitting

distance, etc.), the time can be manually set. The clock will then work as a normal Quartz

clock.

1. The hour digits will start flashing on LCD1.

2. Set the desired hours bypressing and releasing the +key followed by pressing the SET

key.

3. Now the minute digits will start flashing.

4. Set the desired minutes by pressing and releasing the +key . If the +key is held, the

units will increase by 5.

5. Press and release the SET key to move to the “Year Setting”.

YEAR SETTING

The year can be selected sequentially from 2001 to 2029 and will then start over again (default

setting 2006). The 4 digits of the year will be visible on LCD2 .

1. The year digits will start flashing on LCD2. Select the desired year by use of the +key.

2. Press and release the SET key to switch to the “Month Setting”.

MONTH SETTING

1. The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by

use of the +key.

2. Press and release the SET key to move to the mode “Date Setting”.

DATE SETTING

1. The digits for the day will start flashing on LCD2 (Default setting 1). Set the desired day

by use of the +key.

Note: The data can only be set in conjunction with the selected month. For example, it is

not possible to set the data 30 if the months of February is selected.

2. Press and release the SET key to enter the “Weekday Setting” mode.

WEEKDAY SETTING

1. The weekday symbols will be displayed on LCD2 in the pre-set language and flashing.

Set the desired weekday by use of the + key.

2. Press and release the SET key to enter the mode “ºC OR ºF Temperature Setting”.

°C OR °F TEMPERATURE SETTING

1. The characters “°C” or “°F” will start flashing on LCD2 (Default setting °C). B y use of the

+key select “°C” for temperature display in degrees Celsius or “°F” for degrees

Fahrenheit.

2. Press and release the SET key to exit the setting mode and switch back to the normal

display mode.

EXIT THE MANUAL SETTING MODES

• To return to the normal display mode from anywhere in manual setting mode simply

press the SNZ key anytime.

• If no keys are pressed for about 15 seconds in setting mode, the weather wall clock will

automatically switch back to normal display mode.

ALARM SETTING

To enter into the alarm setting mode:

1. Hold the ALM key for 2 seconds. The hour digits start flashing.

2. Press the +key to set the hour.

3. Press and release the ALM key to set the minutes. The minute digits start flashing.

4. Press and release the +key to set the minutes. If the +key is held, the unit will increase

by 5.

5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15

seconds automatic timeout.

TO DEACTIVATE THE ALARM:

The alarm will be automatically ON when the alarm time is

set. To deactivate the alarm (OFF), press and release once the ALM key in normal mode

display. The alarm icon will disappear, the alarm is now off.

SNOOZE SETTING

The snooze can onlybe activated during alarm time for a snooze duration of 10 minutes by

pressing the SNZ key on the back of the clock.

Alarm icon

(((•))) (ON)

Alarm

icon(OFF)

THE WEATHER FORECASTING ICONS:

There are 3 weather icons on the middle section of LCD 2, which can be displayed in any of the

following combinations:

SUNNY CLOUDY WITH SUNNY INTERVALS RAINY

For every sudden or significant change in the air pressure, the weather icons will update

accordingly to represent the change in weather. If the icons do not change, then it means either

the air pressure has not changed or the change has been too slow for the Weather Station to

icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons

are already at their extremes.

The icons displayed forecasts the weather in terms of getting better or worse and not

necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy

and the rainy icon is displayed, it does not mean that the product is faulty because it is not

raining. It simply means that the air pressure has dropped and the weather is expected to get

worse but not necessarily rain.

Note:

After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours.

This will allow sufficient time for the Weather Station to collect air pressure data at a constant

altitude and therefore result in a more accurate forecast.

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather

forecasting feature is estimated to have an accuracy level of about 75% due to the varying

areas the Weather Station has been designed for use in. In areas that experience sudden

changes in weather (for example from sunny to rain), the Weather Station will be more

accurate compared to use in areas where the weather is stagnant most of the time (for

example mostly sunny).

If the Weather Station is moved to another location significantly higher or lower than its initial

standing point (for example from the ground floor to the first floor of a house), remove the

batteries and re-insert them after about 30 seconds. By doing this, the Weather Station will not

Tabla de contenidos

Otros manuales de Reloj de La Crosse Technology

La Crosse Technology

La Crosse Technology 404-3451 Manual de usuario

La Crosse Technology

La Crosse Technology BBB87733 Manual de operación y mantenimiento

La Crosse Technology

La Crosse Technology 513-1417 Manual de usuario

La Crosse Technology

La Crosse Technology T82394 Manual de usuario

La Crosse Technology

La Crosse Technology Sagebrook 404-3015CC Manual de usuario

La Crosse Technology

La Crosse Technology 513-1429THV2 Dimensiones

La Crosse Technology

La Crosse Technology Clock Manual de usuario

La Crosse Technology

La Crosse Technology 513-1419-WA Manual de usuario

La Crosse Technology

La Crosse Technology WS-8001UM Manual de usuario

La Crosse Technology

La Crosse Technology W85746-BHG Manual de usuario

La Crosse Technology

La Crosse Technology WS-8007U Manual de usuario

La Crosse Technology

La Crosse Technology 513-1417CHv2 Manual de usuario

La Crosse Technology

La Crosse Technology WS-7098U Manual de usuario

La Crosse Technology

La Crosse Technology WS-6002U Manual de usuario

La Crosse Technology

La Crosse Technology T73743 Manual de usuario

La Crosse Technology

La Crosse Technology WT-8002UV2 Dimensiones

La Crosse Technology

La Crosse Technology WT-3161WHx1 Manual de usuario

La Crosse Technology

La Crosse Technology 513-1417BS Manual de usuario

La Crosse Technology

La Crosse Technology WS-6118 Manual de usuario

La Crosse Technology

La Crosse Technology 515-1419 Manual de usuario

La Crosse Technology

La Crosse Technology WT-8005U Manual de usuario

La Crosse Technology

La Crosse Technology Landshark Manual de usuario

La Crosse Technology

La Crosse Technology 513-1417 Manual de operación y mantenimiento

La Crosse Technology

La Crosse Technology WT-3181 Manual de usuario

Manuales populares de Reloj de otras marcas

Silicon Laboratories

Silicon Laboratories SI5324 Manual de usuario

Heathkit

Heathkit GC-1005 Manual de usuario

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manual de usuario

Andrew O'Malley

Andrew O'Malley DOTKLOK Manual de usuario

ALGE-Timing

ALGE-Timing ASC3 Manual de usuario

Bodet

Bodet Profil 960 Manual de usuario

Nixie Clock

Nixie Clock Divergence Meter Manual de usuario

Mini Gadgets

Mini Gadgets MCPro Manual de usuario

Casio

Casio TMR-200 Manual de usuario

Progetti

Progetti ILTEMPOSTRINGE Manual

BVItech

BVItech BV-101 Manual de usuario

Progetti

Progetti KALIMERO Manual

Sharp

Sharp SPC900 Manual de usuario

Datexx

Datexx DF0063 Manual de usuario

LG LEC-005 Manual de usuario

IKEA

IKEA ROTBLÖTA Manual de usuario

U-Line

U-Line Н-2811 Manual de usuario

Digiview

Digiview RC305EL Manual de usuario