La Crosse Technology Breeze Pro LTV-WSDTH03 Manual de usuario

MODEL: LTV-WSDTH03

Breeze Pro Sensor

REPLACEMENT SENSOR - STATION CONNECTION

La Crosse View

Device ID

For users setting this up as a replacement sensor, follow these steps to

get it synced with your display:

1. Press and release the SENSOR button on your station until you see the

WIND section light up. Hold the MINUS (-) button to delete the original

sensor. The Reception Icon will begin to animate, indicating it is

searching for a new sensor connection.

2. Install 3 new AA alkaline batteries into the Breeze Pro sensor (as shown

below).

3. Keep the sensor near the display and allow 5 minutes for the sensor

readings toappear.

ADD TO THE LA CROSSE VIEW APP

1. Open your La Crosse View app, select the Devices

tab from the main menu, and then press the ADD

DEVICE or PLUS (+) button near the bottom of the

page.

2. Scan or type in the La Crosse View Device ID

located on the bottom of the sensor.

3. Give the device a Name and Location, and then press

Save. Provided you have the station connected to the

Internet, you should begin to see your sensor data in

the app within the next few minutes.

For help with adding and removing devices within the

La Crosse View app, please view our video here:

bit.ly/add_devices

MOUNTING

For Accurate Measurements

Included Mounting Accessories

•Ensure the sensor is mounted level with the Solar Panel facing

directly to the south. This will help optimize battery life and transmit

correct wind direction readings.

•Ideally, the Breeze Pro Sensor should be mounted on the tallest

object in your area. Avoid positioning the sensor in line or below

eaves, rooﬂines, trees, or other objects that may obstruct wind

readings.

•Make sure all screws on the Mounting Bracket, Winds Cups,

Wind Vane, and Battery Compartment are securely fastened.

•The sensor should be mounted with the Wind Cups on top.

Mast

The horizontal conduit where the sensor

attaches. This piece will connect to either

the Adjustable Base or Pole Adapter.

Adjustable Base

The main bracket used for mounting onto ﬂat surfaces or with

added U-bolts (not included). The grooves and Hand Screw allow

the bracket to secure to angled surfaces while still ensuring the

Mast and sensor are level.

Hand Screw

Used to lock down and secure the Mast

to the Adjustable Base or Pole Adapter.

Alignment Arrows

Provide exact 90 or 180 degree

angles when aligned with the arrow

on the Mast.

Pole Adapter

Used in place of the Adjustable Base

for mounting on top of cylindrical

conduits.

1-Inch Maximum Pole Diameter

INSTALLATION OPTIONS

For Accurate Measurements

Basic Assembly

Advanced Installation Options

Fence posts, poles, decks, and even mailboxes are all common mounting options due to their convenience.

Many users prefer these types of locations as the data they provide is accurate from their ground level

perspective. However, because wind in these spots is often aected by obstructions, the readings may

dier compared to local reporting stations.

Some advanced installation options include tripods, wall mounts, eave cross mounts, chimney mounts,

and many others. Any of these can be combined with U-bolts for attachment onto a tall cylindrical conduit

using our Adjustable Base. Please note that these advanced options will require additional equipment and

possibly professional help for best results.

The illustrations above are

not to scale and are for

informative purposes only.

La Crosse Technology is not

responsible for any damages

or injury that may occur during

installation.

U-Bolt Adapters

1B Pole

Adapter

1A.

1B.

Mount the Adjustable Base onto a ﬂat surface

using the four long screws provided.

Secure the Pole Adapter to a cylindrical

conduit using the two smaller screws provided.

Insert the Mast into the Breeze Pro Sensor and

tighten the provided screws on the sides.

Use the Hand Screw to attach the Mast to either the Adjustable

Base or Pole Adapter. Ensure the sensor is level, facing south,

and securely fastened at all mounting points.

1A Adjustable Base

Tripod

Setup

Chimney

Mount

BREEZE PRO SENSOR SPECIFICATIONS (LTV-WSDTH03)

• Wind Speed Range: 0 to 111 mph (0 to 178 kMh)

• Degrees of Wind Direction: 360° with 16 Cardinal Directions

• Outdoor Temp. Range: -40°F to 140°F (-40°C to 60°C)

• Outdoor Humidity Range: 10 to 99%RH

• Transmission Range: 400 Feet (121.92 Meters)

• Power Requirements: 3 “AA” batteries

• Update Interval: Every 31 Seconds

• Sensor Dimensions: 11.97 in. L x 7.94 in. W x 9.76 in. H (30.40 cm L x 20.17 cm W x 24.79 cm H)

•Do not mix old and new batteries.

•Always purchase the correct size and grade of battery suitable for intended use.

•Ensure the batteries have with correct polarity (+/-).

•Promptly remove expired batteries.

•Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

•Clean the battery contacts and also those of the device prior to battery

installation.

•Remove batteries from equipment that will not to be used for an extended period.

CARE & MAINTENANCE

WARRANTY INFO

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

Patents: www.lacrossetechnology.com/patents

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included

in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All

trademarks and patents are recognized.

This product can expose you to chemicals including acrylonitrile, butadiene, and styrene,

which are known to the State of California to cause cancer and birth defects or other

reproductive harm. For more information, go to: www.P65Warnings.gov

CA WARNING:

Tabla de contenidos

Otros manuales de Accesorios de La Crosse Technology

La Crosse Technology

La Crosse Technology LTV-R3 Manual de usuario

La Crosse Technology

La Crosse Technology CA82738-1 Manual de usuario

La Crosse Technology

La Crosse Technology TX60U-IT Manual de usuario

La Crosse Technology

La Crosse Technology 925-1418 Manual de usuario

La Crosse Technology

La Crosse Technology LTV-W2 Manual de usuario

La Crosse Technology

La Crosse Technology TX141-Bv2 Manual de usuario

La Crosse Technology

La Crosse Technology TX146 Manual de usuario

La Crosse Technology

La Crosse Technology TX9U Manual de usuario

La Crosse Technology

La Crosse Technology LTV-R2 Manual de usuario

La Crosse Technology

La Crosse Technology TX13U Manual de usuario

La Crosse Technology

La Crosse Technology TX-23U Manual de usuario

La Crosse Technology

La Crosse Technology TX5 Manual de usuario

La Crosse Technology

La Crosse Technology TX12U Manual de usuario

La Crosse Technology

La Crosse Technology TX191 Manual de usuario

La Crosse Technology

La Crosse Technology BREEZE PRO SENSOR Manual de usuario

La Crosse Technology

La Crosse Technology LTV-THP1-T1 Manual de usuario

La Crosse Technology

La Crosse Technology TX23U Manual de usuario

La Crosse Technology

La Crosse Technology Alerts TX60U-IT Manual de usuario

La Crosse Technology

La Crosse Technology TX141-B4 Manual de usuario

La Crosse Technology

La Crosse Technology TX10U Manual de usuario

La Crosse Technology

La Crosse Technology TX-63U-IT Manual de usuario

La Crosse Technology

La Crosse Technology LTV-POOLv2 Manual de usuario

La Crosse Technology

La Crosse Technology LTV-R1 Manual de usuario

La Crosse Technology

La Crosse Technology WCLTV-WSDR1 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario