Kyocera ECOSYS M3145dn Manual de usuario
Card Authentication Kit (B)
OPERATION GUIDE
PRINT COPY SCAN
ECOSYS M3145dn
PRINT COPY SCAN FAX
ECOSYS M3645dn
1
Card Authentication Kit (B) Operation Guide
Introduction
Thank you for purchasing our Card Authentication Kit (B).
This product enables you to use the ID card user
authentication system.
Precautions
To install the optional function, you need the License Key.
Please access the designated website of your dealer or
service representative, and register “Machine No.”
indicated on your machine and “Product ID” indicated on
the License Certificate supplied with the product to issue
the License Key.
For ID card reading, refer to the instructions of the card
reader.
For User Login setting and user registration, refer to User
Authentication and Accounting (User Login, Job
Accounting) in the Operation Guide of the machine.
To make local authentication using your ID card, you need
to register the ID card information in the Local User List you
are pre-registered on. For registration procedure, refer to
the To register the ID card information.
To make network authentication using your ID card, you
need to install the KYOCERA Net Manager on the network
authentication server. Register the user from the server and
enter the ID card's ID number. Refer to the KYOCERA Net
Manager Install Manual for details.
Activation of Card Authentication Kit(B)
Activate the ID CARD from the operation panel on the
machine.
1 Press the System Menu/Counter key.
2 Press the ▲or ▼key to select [System/Network] and
then press the OK key.
NOTE:If User Login is set to Off, the Login screen appears.
Refer to the procedure of Key Login, and login using the
login user name and password with administrator
privileges.
3 Press the ▲or ▼key to select [Op Functions] and
then press the OK key.
4 Press the ▲or ▼key to select [ID CARD] and then
press the OK key.
5 Press the ▲or ▼key to select [Official] and then press
the OK key.
NOTE:To use the application as a trial, select [Trial] without
entering the license key.
6 Enter the Licence Key using the numeric keys and then
press the OK key.
7 When the confirmation screen appears, press [Yes]
(Left Select key).
Setting User Login
Make the settings of Local Authentic. or Netwk Authentic. in
User/Job Accounting on the machine.
NOTE:For User Login setting, refer to the Operation Guide
of the machine.
When you enable User Login on the machine, you need to
make the setting of user account for the printer driver in
order to print by the computer. For details, refer to the
Printer Driver User Guide, Device Settings, and
Administrator Settings.
2
Registering/deleting the ID card
information
The procedures below are to register or delete the card
information of a pre-registered user.
For new registration or change of user information on Local
User List, refer to the Operation Guide of the machine.
To register the ID card information
To login using the ID card, you need to register the ID card
information in the user information.
Follow the steps below.
1 Press the System Menu/Counter key.
NOTE:If Local Authentic. has been set in User Login, the
Use ID card to login. screen appears. Refer to Login or the
procedure of Key Login, and login using the ID card
registered with administrator privileges or using the login
user name.
To enter your login user name and login password, refer to
the machine's Operation Guide.
2Pressthe▲or ▼key to select [User/Job Account] and
then press the OK key.
NOTE:If User Login is disabled, the Use ID card to login.
screen appears. Refer to Login or the procedure of Key
Login, and login using the ID card registered with
administrator privileges or using the login user name.
To enter your login user name and login password, refer to
the machine's Operation Guide.
3 Press the ▲or ▼key to select [User Login Set.] and
then press the OK key.
4 Press the ▲or ▼key to select [Local User List.] and
then press the OK key.
5 Press the ▲or ▼key to select the user from User
Login List and then press the OK key.
6 Press the ▲or ▼key to select [ID Card Info.] and then
press [Change] (Right Select key).
7 Press the ▲or ▼key to select [Read] and then press
the OK key.
8 Hold the ID card to be registered over the card reader ,
and press [Read] (Right Select key). When
Registered. appears on the screen, and then returns to
the Detail menu.
9 In the Detail menu, press the OK key. The confirmation
screen appears.
10 Press [Yes] (Left Select key). The user information is
changed. When Registered. appears on the screen, the
ID card information is now registered.
To delete the ID card information
You can delete the ID card information registered in the
user information.
Follow the steps below.
1 Perform the step 1 to 6 of To register the ID card
information.
2 Press the ▲or ▼key to select [Delete].
3 In the confirmation screen, press [Yes] (Left Select
key). When Completed. appears on the screen, and
then returns to the Detail menu.
4 In the Detail menu, press the OK key. The confirmation
screen appears.
5 Press [Yes] (Left Select key). The user information is
changed. When Registered. appears on the screen, the
ID card information is now deleted.
Connecting the USB cable
Connect the USB cable of ID card reader to the USB
memory slot on the machine.
3
Login
After installing the Card Authentication Kit (B) and setting
User Login, Use ID card to login. will appear when you use
the machine.
To login, hold the ID card over the ID Card Reader.
Caution: To read an ID card, bring the card within 10 mm of
the ID card reader.
Do not attempt to read two ID cards at once.
NOTE: When Additional Authentication is set to Use
Password, the Login Password is entered after
authentication using the ID card. For the setting procedure,
refer to Additional Authentication.
Key Login
You can login by entering the login user name and login
password without using the ID card.
NOTE: You can make the login permission or prohibition
setting. For the setting procedure, refer to Key Login
setting.
Follow the steps below.
1 Press the [KeyLogin] (Left Select key) in the ID card
login screen.
2 Enter the login user name and password, and then
press [Login] (Right Select key).
NOTE:Refer to the Operation Guide of the printer for details
on entering characters.
To return to the Use ID card to login. screen, press [Menu]
(Left Select key) and press the ▼key to select [ID Card
Login], and then press the OK key.
Logout
After completing the procedure, press the Logout key on
the control panel.
Key Login setting
You can make the Key Login permission or prohibition
setting.
Follow the steps below.
1 Press the System Menu/Counter key.
NOTE:If Netwk Authentic. has been set in User Login,the
Use ID card to login. screen appears. Refer to Login or the
procedure of Key Login, and login using the ID card
registered with administrator privileges or using the login
user name.
2 Press the ▲or ▼key to select [User/Job Account] and
then press the OK key.
NOTE:If User Login is set to Off, the Use ID card to login.
screen appears. Refer to the procedure of Key Login, and
login using the login user name and password with
administrator privileges.
3 Press the ▲or ▼key to select [User Login Set.] and
then press the OK key.
4 Press the ▲or ▼key to select [ID Card Settings] and
then press the OK key.
5 Press the ▲or ▼key to select [Key Login] and then
press the OK key.
6 Press the ▲or ▼key to select [Permit] or [Prohibit]
and then press the OK key.
4
Additional Authentication
This sets whether or not to require the entry of a Login
Password after authentication using an ID card. When set
to Use Password, the Login Password entry screen is
displayed after the ID card is authenticated.
Follow the steps below.
1 Perform the step 1 to 4 of Key Login setting.
2 Press the ▲or ▼key select [Additional Auth.] and then
press the OK key.
3 Press the ▲or ▼key select [Off], [Use Password] or
[Use PIN] and then press the OK key.
NOTE:To use PIN code authentication, you must enable
network authentication and set the server type to [Ext.].
For details, refer to the machine's Operation Guide.
Responding to Error Messages
If the panel displays any of these message, follow the
corresponding procedure.
Error Message Corrective Actions
Cannot recognize. Make sure your ID card has been
registered.
This ID card is
already registered.
Your ID card has already been
registered. Change it to another ID
card.
Cannot read data in
this ID card.
In registration process, the ID card
information was not read correctly. Hold
again the ID card over the ID card
reading part.
If the same message still appears, the
ID card may not be compatible with this
product. Change it to another ID card.
First edition 2018.2
3MT2TGKDEN0
Otros manuales para ECOSYS M3145dn
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Impresora todo en uno de Kyocera
Kyocera
Kyocera KM-3050 Manual de usuario
Kyocera
Kyocera KM-C4008 Manual de usuario
Kyocera
Kyocera FS FS-C8500DN Guía de referencia
Kyocera
Kyocera TASKalfa 6550ci Manual de instalación y funcionamiento
Kyocera
Kyocera ECOSYS FS-1370DN Manual de usuario
Kyocera
Kyocera TASKalfa 307ci Manual de usuario
Kyocera
Kyocera TASKalfa 2550ci Manual de usuario
Kyocera
Kyocera TASKalfa 5551ci Manual de usuario
Kyocera
Kyocera KM-1820 Manual de usuario
Kyocera
Kyocera TASKalfa 2550ci Manual de usuario
Kyocera
Kyocera ECOSYS M6035cidn Manual de usuario
Kyocera
Kyocera ECOSYS P7240cdn Manual de referencia
Kyocera
Kyocera TASKalfa 181 Manual de usuario
Kyocera
Kyocera Vi7360 Manual
Kyocera
Kyocera ECOSYS FS-3540MFP Manual de usuario
Kyocera
Kyocera TASKalfa 181 Manual de usuario
Kyocera
Kyocera FS-4300DN Manual de usuario
Kyocera
Kyocera ECOSYS MA2100cfx Manual de usuario
Kyocera
Kyocera TASKalfa 3051ci Manual de usuario
Kyocera
Kyocera ECOSYS M3645idn Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
