Kyocera FS FS-C8500DN Guía de referencia

PODRĘCZNIK OBSŁUGI

FS-C8500DN

Wstęp

Dziękujemy za zakup FS-C8500DN.

Ten podręcznik obsługi został napisany, aby pomóc użytkownikowi w

poprawnej obsłudze maszyny, przeprowadzaniu rutynowej konserwacji i

podejmowaniu prostych czynności dotyczących rozwiązywania problemów,

które są niezbędne, by można było stale użytkować maszynę, pozostającą w

dobrym stanie technicznym.

Proszę przed przystąpieniem do użytkowania maszyny przeczytać ten

podręcznik obsługi i trzymać go w pobliżu maszyny, by łatwo było do niego

zajrzeć w razie potrzeby.

Zaleca się korzystanie z oryginalnych materiałów firmy Kyocera. Firma

Kyocera nie ponosi żadnej odpowiedzialności za szkody spowodowane

użyciem w tym urządzeniu materiałów innych producentów.

iii

Spis tresci

Informacje o regulacjach prawnych i bezpieczeństwie

1Części urządzenia

Elementy z przodu drukarki ....................................................... 1-2

Elementy z lewej strony drukarki .............................................. 1-2

Elementy z prawej strony drukarki ........................................... 1-3

Elementy wewnątrz drukarki ..................................................... 1-4

Panel operacyjny ........................................................................ 1-5

2Działanie drukarki

Zmiana parametrów interfejsu sieciowego .............................. 2-2

Drukowanie strony stanu ........................................................... 2-3

Instalacja sterownika drukarki .................................................. 2-4

Drukowanie z aplikacji ............................................................... 2-9

Monitor stanu ............................................................................ 2-10

Odinstalowywanie oprogramowania (komputer PC z systemem

Windows) ................................................................................... 2-13

3 Konserwacja

Informacje ogólne ....................................................................... 3-2

Wymiana zbiornika tonera ......................................................... 3-2

Wymiana pojemnika na zużyty toner ........................................ 3-6

Czyszczenie drukarki ................................................................. 3-8

4Rozwiązywanie problemów

Wskazówki ogólne ...................................................................... 4-2

Problemy z jakościąwydruków ................................................. 4-3

Komunikaty o błędach ............................................................... 4-6

Usuwanie zacięć papieru ......................................................... 4-16

Dodatek

Dane techniczne .........................................................................A-2

Indeks

Informacje o regulacjach

prawnych i bezpieczeństwie

Uwaga dotycząca oprogramowania

OPROGRAMOWANIE UŻYWANE Z TĄDRUKARKĄMUSI

OBSŁUGIWAĆTRYB EMULACJI DRUKARKI. Drukarka jest fabrycznie

ustawiona na emulacjęPCL.

Uwaga

Informacje podane w tym podręczniku mogąulec zmianie bez

uprzedzenia. W kolejnych wydaniach mogązostaćdodane dodatkowe

strony. Prosimy o wyrozumiałość w razie niedokładności lub błędów

typograficznych w niniejszym wydaniu.

Firma nie ponosi odpowiedzialności za wypadki zaistniałe podczas

wykonywania czynności opisanych w podręczniku. Firma nie ponosi

równieżodpowiedzialności za usterki w oprogramowaniu systemowym

drukarki (zawartym w jej pamięci ROM).

Niniejszy podręcznik oraz wszelkie materiały sprzedawane i dostarczane

podczas sprzedaży drukarki stronicowej lub mające z niązwiązek są

chronione prawem autorskim. Wszelkie prawa zastrzeżone. Kopiowanie

i każdy inny sposób reprodukowania całości lub części tego podręcznika

oraz materiałów chronionych prawami autorskimi bez wcześniejszej

pisemnej zgody firmy Kyocera Mita Corporation jest zabronione.

Wszelkie kopie całości lub części tego podręcznika podlegające prawu

autorskiemu muszązawieraćtakie samo zastrzeżenie praw autorskich

jak materiał, z którego została zrobiona kopia.

Znaki towarowe

PRESCRIBE jest zastrzeżonym znakiem towarowym firmy Kyocera

Corporation. KPDL to znak towarowy firmy Kyocera Corporation.

Hewlett-Packard, PCL i PJL to zastrzeżone znaki towarowe firmy

Hewlett-Packard Company. Centronics to znak towarowy firmy

Centronics Data Computer Inc. PostScript to zastrzeżony znak towarowy

firmy Adobe Systems Incorporated. Macintosh, Bonjour są

zastrzeżonymi znakami towarowym firmy Apple Computer, Inc. Microsoft,

Windows i Windows NT sązastrzeżonymi znakami towarowymi firmy

Microsoft Corporation. PowerPC i Microdrive to znaki towarowe firmy

International Business Machines Corporation. CompactFlash to znak

towarowy firmy SanDisk Corporation. ENERGY STAR jest znakiem

zastrzeżonym w USA. Wszelkie inne marki i nazwy produktów są

znakami towarowymi lub zastrzeżonymi znakami towarowymi

odpowiednich firm.

Niniejszy produkt zawiera czcionki UFST™ i MicroType®firmy Monotype

Imaging Inc.

UWAGA FIRMA NIE PONOSI ODPOWIEDZIALNOŚCI

ZA SZKODY SPOWODOWANE NIEWŁAŚCIWĄ

INSTALACJĄ.

Umowy licencyjne

Potwierdzenie znaków towarowych czcionek

Wszystkie czcionki rezydentne tej drukarki posiadająlicencjęfirmy

Monotype Imaging Inc.

Helvetica, Palatino i Times to zastrzeżone znaki towarowe firmy Linotype-

Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery i ITC

Zapf Dingbats to zastrzeżone znaki towarowe firmy International

Typeface Corporation.

Monotype Imaging License Agreement

1“Software” shall mean the digitally encoded, machine readable,

scalable outline data as encoded in a special format as well as the

UFST Software.

2You agree to accept a non-exclusive license to use the Software to

reproduce and display weights, styles and versions of letters,

numerals, characters and symbols (“Typefaces”) solely for your own

customary business or personal purposes at the address stated on

the registration card you return to Monotype Imaging. Under the

terms of this License Agreement, you have the right to use the Fonts

on up to three printers. If you need to have access to the fonts on

more than three printers, you need to acquire a multi-user license

agreement which can be obtained from Monotype Imaging.

Monotype Imaging retains all rights, title and interest to the Software

and Typefaces and no rights are granted to you other than a License

to use the Software on the terms expressly set forth in this

Agreement.

3To protect proprietary rights of Monotype Imaging, you agree to

maintain the Software and other proprietary information concerning

the Typefaces in strict confidence and to establish reasonable

procedures regulating access to and use of the Software and

Typefaces.

4You agree not to duplicate or copy the Software or Typefaces,

except that you may make one backup copy. You agree that any

such copy shall contain the same proprietary notices as those

appearing on the original.

5This License shall continue until the last use of the Software and

Typefaces, unless sooner terminated. This License may be

terminated by Monotype Imaging if you fail to comply with the terms

of this License and such failure is not remedied within thirty (30)

days after notice from Monotype Imaging. When this License expires

or is terminated, you shall either return to Monotype Imaging or

destroy all copies of the Software and Typefaces and documentation

as requested.

6You agree that you will not modify, alter, disassemble, decrypt,

reverse engineer or decompile the Software.

7Monotype Imaging warrants that for ninety (90) days after delivery,

the Software will perform in accordance with Monotype Imaging-

published specifications, and the diskette will be free from defects in

material and workmanship. Monotype Imaging does not warrant that

the Software is free from all bugs, errors and omissions.

8THE PARTIES AGREE THAT ALL OTHER WARRANTIES,

EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE AND

MERCHANTABILITY, ARE EXCLUDED.

vii

9Your exclusive remedy and the sole liability of Monotype Imaging in

connection with the Software and Typefaces is repair or replacement

of defective parts, upon their return to Monotype Imaging.

10 IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST

PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY

ABUSE OR MISAPPLICATION OF THE SOFTWARE AND

TYPEFACES.

11 Massachusetts U.S.A. law governs this Agreement.

12 You shall not sublicense, sell, lease, or otherwise transfer the

Software and/or Typefaces without the prior written consent of

Monotype Imaging.

13 Use, duplication or disclosure by the Government is subject to

restrictions as set forth in the Rights in Technical Data and Computer

Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or

subparagraph (c)(1)(ii), as appropriate. Further use, duplication or

disclosure is subject to restrictions applicable to restricted rights

software as set forth in FAR 52.227-19 (c)(2).

14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS

AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY

ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE

BOUND BY ANY STATEMENT OR REPRESENTATION NOT

CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS

AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED

BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH

PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE

TO ACCEPT THE TERMS AND CONDITIONS OF THIS

AGREEMENT.

GPL

Oprogramowanie tego urządzenia częściowo korzysta z kodów GPL

(www.fsf.org/copyleft/gpl.html). Więcej informacji na temat dostępności

stosowanych kodów GPL znajduje sięna stronie internetowej "http://

www.kyoceramita.com/gpl".

Open SSLeay License

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3All advertising materials mentioning features or use of this software

must display the following acknowledgment:

"This product includes software developed by the OpenSSL Project

for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4The names "OpenSSL Toolkit" and "OpenSSL Project" must not be

used to endorse or promote products derived from this software

without prior written permission.

For written permission, please contact [email protected].

5Products derived from this software may not be called "OpenSSL"

nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project.

viii

6Redistributions of any form whatsoever must retain the following

acknowledgment: "This product includes software developed by the

OpenSSL Project for use in the OpenSSL Toolkit (http://

www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS"

AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR

ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

reserved.

This package is an SSL implementation written by Eric Young

([email protected]). The implementation was written so as to conform

with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the

following conditions are aheared to. The following conditions apply to all

code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;

not just the SSL code. The SSL documentation included with this

distribution is covered by the same copyright terms except that the holder

is Tim Hudson ([email protected]).

code are not to be removed.

If this package is used in a product, Eric Young should be given attribution

as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in

documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1Redistributions of source code must retain the copyright notice, this

list of conditions and the following disclaimer.

2Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3All advertising materials mentioning features or use of this software

must display the following acknowledgement:

"This product includes cryptographic software written by Eric Young

([email protected])"

The word 'cryptographic' can be left out if the rouines from the library

being used are not cryptographic related :-).

4If you include any Windows specific code (or a derivative thereof)

from the apps directory (application code) you must include an

acknowledgement:

"This product includes software written by Tim Hudson

([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or

derivative of this code cannot be changed. i.e. this code cannot simply be

copied and put under another distribution licence [including the GNU

Public Licence.]

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• The use of a non-shielded interface cable with the referenced device

is prohibited.

CAUTION —The changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC

Rules.

Operation is subject to the following two conditions; (1) this device may

not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

* The above warning is valid only in the United States of America.

Złącza interfejsów

WAŻNE Przed podłączaniem lub odłączaniem kabla interfejsu należy

sięupewnić, że drukarka jest wyłączona. Aby zapobiec

wyładowaniom elektrostatycznym, które mogązostaćprzeniesione

do wewnętrznych zespołów elektronicznych drukarki przez złącza

interfejsu, nieużywane złącze powinno byćosłonięte dostarczoną

nasadkąochronną.

Notatka Należy stosowaćkable ekranowane.

Otros manuales para FS FS-C8500DN

Tabla de contenidos

Otros manuales de Impresora todo en uno de Kyocera

Kyocera

Kyocera TASKalfa 650c Guía de inicio rápido

Kyocera

Kyocera TASKalfa 3010i Manual de usuario

Kyocera

Kyocera ECOSYS FS-3540MFP Manual de usuario

Kyocera

Kyocera ECOSYS MA2100cwfx Manual de usuario

Kyocera

Kyocera ECOSYS M2135dn Manual de usuario

Kyocera

Kyocera TASKalfa 2550ci Manual de instalación y funcionamiento

Kyocera

Kyocera ecosys M2735DW Manual de usuario

Kyocera

Kyocera KM-3035 Manual de usuario

Kyocera

Kyocera TASKALFA 300I Manual de usuario

Kyocera

Kyocera ECOSYS P2135dn Manual de usuario

Kyocera

Kyocera ECOSYS FS-6525MFP Manual

Kyocera

Kyocera TASKalfa 265ci Manual de usuario

Kyocera

Kyocera ECOSYS FS-1370DN Manual de usuario

Kyocera

Kyocera ECOSYS M4125idn Manual de usuario

Kyocera

Kyocera TASKalfa 650c Manual de usuario

Kyocera

Kyocera ecosys M2735DW Manual de usuario

Kyocera

Kyocera ECOSYS M6035cidn Manual de usuario

Kyocera

Kyocera ECOSYS M2835dw Manual de usuario

Kyocera

Kyocera FS-C1020MFP+ Manual de usuario

Kyocera

Kyocera ECOSYS FS-3040MFP+ Manual de usuario

Kyocera

Kyocera TASKalfa 3500i Manual de usuario

Kyocera

Kyocera ECOSYS FS-3540MFP Manual de usuario

Kyocera

Kyocera TASKalfa 266ci Manual de usuario

Kyocera

Kyocera KM-F1060 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario