KUHN FC703 RA Manual de usuario

KN101KGB A

OPERATOR'S MANUAL

Mower conditioner

FC703 RA*

KN101KGB A

- English - 04-2008

Fast fit knives

Dear Owner

Mower conditioner

FC703 RA*

$DEAR OWNER

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvements. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only by

proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

Designated use of the machine

The FC703RA* mower conditioner must only be used for the work for which it has been designed: mowing on

the ground of hay fields, grass silage fields and improved pastures for the purpose of harvesting fodder for

feeding livestock, with the possibility of grouping swaths or forming large swaths.

Mower conditioner

FC703 RA*

Contents

$CONTENTS

Dear Owner..................................................................................................................... 1

Contents ......................................................................................................................... 2

Identification of the machine ........................................................................................ 4

Front view (Working position) ........................................................................................................ 4

Rear view (transport position)........................................................................................................ 4

Model identification plate................................................................................................................ 5

Optional equipment ......................................................................................................................... 5

Safety .............................................................................................................................. 6

Description of symbols used in this document ............................................................................ 6

Safety instructions........................................................................................................................... 7

Location and description of safety decals on the machine....................................................... 16

Road safety equipment and recommendations .......................................................................... 19

Machine specifications................................................................................................ 20

Description and glossary .............................................................................................................. 20

Technical specifications................................................................................................................ 24

Sound levels................................................................................................................................... 24

Putting into service...................................................................................................... 25

Description of control elements ................................................................................................... 25

Coupling and uncoupling.............................................................................................................. 28

Instructions for transport............................................................................................ 38

Putting the machine into transport position ............................................................................... 38

Conformity with the road regulations .......................................................................................... 42

Contents

Mower conditioner

FC703 RA*

Instructions for work....................................................................................................43

Putting the machine into work position ...................................................................................... 43

Putting the machine in headland turn position .......................................................................... 47

Adjustments in working position .................................................................................................48

Machine use ................................................................................................................................... 54

Optional equipment......................................................................................................56

PTO shafts ...................................................................................................................................... 56

Raised skid shoes ......................................................................................................................... 56

Wide swathing kit .......................................................................................................................... 57

Maintenance and storage ............................................................................................65

Frequency chart............................................................................................................................. 65

Cleaning the machine.................................................................................................................... 67

Lubrication ..................................................................................................................................... 67

Maintenance................................................................................................................................... 74

Storage ........................................................................................................................................... 91

Trouble shooting guide................................................................................................92

Limited warranty...........................................................................................................94

Mower conditioner

FC703 RA*

Identification of the machine

$IDENTIFICATION OF THE MACHINE

1. Front view (Working position)

2. Rear view (transport position)

Identification of the machine

Mower conditioner

FC703 RA*

3. Model identification plate

Please write below the type and serial number of the

machine. This information is to be indicated to the dealer

for all spare parts orders.

Type: FC703 RA*

Serial no.:

4. Optional equipment

Tick box corresponding to the equipment fitted on your

machine:

Part no. 4600661: 1 3/4’’ - 6 spline pto shaft.

Part no. 4600660: 1 3/4’’ - 20 spline pto shaft.

Part no. 4600663: 1 3/8’’ - 6 spline pto shaft.

Part no. 4600662: 1 3/8’’ - 21 spline pto shaft.

Kit no. 1076530: Raised skid shoes.

Kit no. 1076520: Wide swathing kit.

Mower conditioner

FC703 RA*

Safety

$SAFETY

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

Mower conditioner

FC703 RA*

2. Safety instructions

Read and follow the safety instructions

Before using the machine, carefully read all the safety

instructions in this manual and the warnings placed on

the machine.

Before starting work, the operator must be familiar with

all machine controls, handling devices and their

functions. It is too late to learn once work has been

started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to be taken before carrying out

any operations on the machine

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the

PTO drive, turn off the engine, remove ignition key and

wait until all moving parts have come to a complete stop

and apply park brake.

Introduction

The machine must only be operated, maintained and repaired by competent persons who are familiar with

machine specifications and operation and aware of safety regulations for preventing accidents.

The operator must imperatively respect safety instructions in this manual and in the warnings posted on the

machine. The operator is also obliged to respect current legislation concerning accident prevention, work safety

and public traffic circulation.

Designated use of the machine also means following operation, maintenance and repair recommendations given

by the manufacturer, and using only genuine spare parts, equipment and accessories, as recommended by the

manufacturer.

The manufacturer is not held liable for any damage resulting from machine applications other than those

specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility of the

operator.

The manufacturer is not held liable for any damage or accidents resulting from machine modifications carried out

by the operator himself or by a third party without previous written agreement from the manufacturer.

Mower conditioner

FC703 RA*

Safety

Precautions to take before using the

machine

Do not wear loose clothing which could become caught

up in moving parts.

Wear the appropriate protective clothing for the work in

hand (gloves, shoes, goggles, helmet, ear-protectors,

etc.).

Make sure that all operating controls (ropes, cables,

rods, etc) are placed so that they cannot be set off

accidentally, risking accident or damage.

Before operating the machine, check tightness of nuts

and bolts, particularly on fixing elements (tines, forks,

blades, knives, etc). Retighten if necessary.

Before operating the machine, ensure that all the safety

guards are firmly in place and in good condition.

Immediately replace any worn or damaged guard.

Precautions when driving

Precision steering, tractor adherence, road holding and

efficient braking are influenced by the type of implement,

weight, ballast of front axle, ground or road conditions. It

is therefore of the utmost importance to be cautious in

every given situation.

Groundspeed must be adapted to ground conditions as

well as to roads and paths. Always avoid abrupt changes

of direction.

Be particularly cautious when turning corners, paying

attention to machine overhang, length, height and

weight.

Never use a narrow track tractor on very uneven or

steeply sloping ground.

Never leave the tractor seat while the machine is

operating.

Carrying people or animals on the machine when

working or in transport is strictly forbidden.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Maquinaria agrícola de KUHN

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario

TURF TANK

TURF TANK One+ Manual de usuario