KTI Networks KC-10FM Manual de usuario

Specifications

• ComplieswithIEEE802.310BASE-Tand10BASE-FLstd.

• Supports UTP cable up to 100 meters (328 feet)

• Supports fiber optic cable up to 2000 meters (6500 feet)

• Supports LED indications for the Power, UTP Link,

UTP Receiving, Fiber Link, and Fiber Receiving status

• Environment: Temperature0 - 40oC

Humidity 10-90% non condensing

• Dimension: 74mmx51mmx20mm

• Power: +12V/500mAminimum

Connectors&Cables

10BASE-TRJ-45Connector

One RJ-45 switch is provided for selecting the type of RJ-

45 connector as follows:

RJ-45 Switch RJ-45 Type

X position MDI-X

IIposition MDI-I

RJ-45 Pin MDI-X type MDI-I type

1 Rx+ Tx+

2 RX- Tx-

3 Tx+ Rx+

6 Tx- Rx-

It allows you to make all UTP connections using common

straight-through UTP.

10BASE-TUTPCable

Cable type: Category 3, 4 or 5

Maximumcable distance: 100 meters(328 feet)

FiberOpticConnectors

Two ST connectors are provided for fiber optic cable

connection. One is labeled "Tx" for transmitting operation.

The other is labeled "Rx" for receiving operation.

FiberOpticCable

Cabletype:62.5/125mmmultimode fiber(recommended)

Maximumcabledistance: 2000 meters (6500feet)

Installation

1. Install the media converter with the DC power adapter

provided.(+12VDC,500mA)

2. Connect the power adapter cable to the media con-

verter before connecting the adapter to the AC outlet.

3. Do not connect more than two media converters in

series.

MakingNetworkConnections

The following example illustrates a connection from a

10BASE-T port of one hub to a 10BASE-FL port of

another hub through a media converter.

The following example illustrates a connection from a

10BASE-T port of one hub to a 10BASE-T NIC on a

computer through a media converter.

GeneralDescription

KC-10FM Ethernet media converter is designed to be a

connection interface between a 10BASE-T Ethernet UTP

cableand 10BASE-FL fibercable. Itfeatures a RJ-45

connector and a pair of ST fiber optic connectors.

Theconverter complies with IEEE802.3 10BASE-Tand

10BASE-FL standard and supports a UTP cable up to 100

meters and a fiber optic cable up to 2000 meters with no

increasing on the hop count in the network.

InstallationGuide

Ethernet Media Converter

Model:KC-10FM

DOC. 980422-KC10FM-K

P/N: 750-0111-001

InterpretingLEDIndicators

LED Status State Interpretation

Power Power status On Converter is on.

Off Converter is off.

Link Fiberlink On The fiber link is ok.

Off No link or the link is faulty.

Rx Receiving status Blink Receiving is in operation.

Off No fiber receiving.

Link UTPlink On TheUTPlinkis ok.

Off No link or the link is faulty.

Rx Receiving status Blink Receiving is in operation.

Off No fiber receiving.

The information contained in this document is subject to change

without prior notice.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

WARNING:

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference when the equipment is

operated in a commercial environment. This equipment gener-

ates, uses, and can radiate radio frequency energy and if not

installed and used in accordance with the instruction manual

may cause harmful interference in which case the user will be

required to correct the interference at his own expense.

NOTICE:

(1) The changes or modifications not expressively approved by

the party responsible for compliance could void the user's

authority to operate the equipment.

(2) Shielded interface cables and AC power cord, if any, must

be used in order to comply with the emission limits.

CISPR A COMPLIANCE:

This device complies with EMC directive of the European

Community and meets or exceeds the following technical

standard.

EN 55022 - Limits and Methods of Measurement of Radio

Interference Characteristics of Information Technology Equip-

ment. This device complies with CISPR Class A.

WARNING: This is a Class A product. In a domestic environment

this product may cause radio interference in which case the

user may be required to take adequate measures.

CE NOTICE

Marking by the symbol CE indicates compliance of this equipment

to the EMC directive of the European Community. Such marking is

indicative that this equipment meets or exceeds the following

technical standards:

EN 55022: Limits and Methods of Measurement of Radio

Interference characteristics of Information Technology Equip-

ment.

EN 50082/1:Generic Immunity Standard -Part 1: Domestic

Commercial and Light Industry.

EN 60555-2: Disturbances in supply systems caused by

household appliances and similar electrical equipment - Part 2:

Harmonics.

Specifications

• ComplieswithIEEE802.310BASE-Tand10BASE-FLstd.

• Supports UTP cable up to 100 meters (328 feet)

• Supports fiber optic cable up to 2000 meters (6500 feet)

• Supports LED indications for the Power, UTP Link,

UTP Receiving, Fiber Link, and Fiber Receiving status

• Environment: Temperature0 - 40oC

Humidity 10-90% non condensing

• Dimension: 74mmx51mmx20mm

• Power: +12V/500mAminimum

Connectors&Cables

10BASE-TRJ-45Connector

One RJ-45 switch is provided for selecting the type of RJ-

45 connector as follows:

RJ-45 Switch RJ-45 Type

X position MDI-X

IIposition MDI-I

RJ-45 Pin MDI-X type MDI-I type

1 Rx+ Tx+

2 RX- Tx-

3 Tx+ Rx+

6 Tx- Rx-

It allows you to make all UTP connections using common

straight-through UTP.

10BASE-TUTPCable

Cable type: Category 3, 4 or 5

Maximumcable distance: 100 meters(328 feet)

FiberOpticConnectors

Two ST connectors are provided for fiber optic cable

connection. One is labeled "Tx" for transmitting operation.

The other is labeled "Rx" for receiving operation.

FiberOpticCable

Cabletype:62.5/125mmmultimode fiber(recommended)

Maximumcabledistance: 2000 meters (6500feet)

Installation

1. Install the media converter with the DC power adapter

provided.(+12VDC,500mA)

2. Connect the power adapter cable to the media con-

verter before connecting the adapter to the AC outlet.

3. Do not connect more than two media converters in

series.

MakingNetworkConnections

The following example illustrates a connection from a

10BASE-T port of one hub to a 10BASE-FL port of

another hub through a media converter.

The following example illustrates a connection from a

10BASE-T port of one hub to a 10BASE-T NIC on a

computer through a media converter.

GeneralDescription

The10BASE-T/10BASE-FL Ethernetmedia converter is

designed to be a connection interface between a 10BASE-T

EthernetUTPcableand10BASE-FLfibercable.It features a

RJ-45 connector and a pair of ST fiber optic connectors.

Theconverter complies with IEEE802.3 10BASE-Tand

10BASE-FL standard and supports a UTP cable up to 100

meters and a fiber optic cable up to 2000 meters with no

increasing on the hop count in the network.

InstallationGuide

10BASE-T/10BASE-FL

Ethernet Media Converter

DOC. 980510-KC10FM-NK

P/N: 750-0111-002

InterpretingLEDIndicators

LED Status State Interpretation

Power Power status On Converter is on.

Off Converter is off.

Link Fiberlink On The fiber link is ok.

Off No link or the link is faulty.

Rx Receiving status Blink Receiving is in operation.

Off No fiber receiving.

Link UTPlink On TheUTPlinkis ok.

Off No link or the link is faulty.

Rx Receiving status Blink Receiving is in operation.

Off No fiber receiving.

The information contained in this document is subject to change

without prior notice.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

WARNING:

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference when the equipment is

operated in a commercial environment. This equipment gener-

ates, uses, and can radiate radio frequency energy and if not

installed and used in accordance with the instruction manual

may cause harmful interference in which case the user will be

required to correct the interference at his own expense.

NOTICE:

(1) The changes or modifications not expressively approved by

the party responsible for compliance could void the user's

authority to operate the equipment.

(2) Shielded interface cables and AC power cord, if any, must

be used in order to comply with the emission limits.

CISPR A COMPLIANCE:

This device complies with EMC directive of the European

Community and meets or exceeds the following technical

standard.

EN 55022 - Limits and Methods of Measurement of Radio

Interference Characteristics of Information Technology Equip-

ment. This device complies with CISPR Class A.

WARNING: This is a Class A product. In a domestic environment

this product may cause radio interference in which case the

user may be required to take adequate measures.

CE NOTICE

Marking by the symbol CE indicates compliance of this equipment

to the EMC directive of the European Community. Such marking is

indicative that this equipment meets or exceeds the following

technical standards:

EN 55022: Limits and Methods of Measurement of Radio

Interference characteristics of Information Technology Equip-

ment.

EN 50082/1:Generic Immunity Standard -Part 1: Domestic

Commercial and Light Industry.

EN 60555-2: Disturbances in supply systems caused by

household appliances and similar electrical equipment - Part 2:

Harmonics.

Tabla de contenidos

Otros manuales de Convertidor de medios de KTI Networks

KTI Networks

KTI Networks KC-350-C Manual de usuario

KTI Networks

KTI Networks KC-220FF-TSA Manual de usuario

KTI Networks

KTI Networks Modular Media Converter Center System... Manual de usuario

KTI Networks

KTI Networks KSC-240 Manual de usuario

KTI Networks

KTI Networks KC-351 Series Manual de usuario

KTI Networks

KTI Networks KGC-301 Manual de usuario

KTI Networks

KTI Networks KC-300DM Manual de usuario

KTI Networks

KTI Networks KFC-241 Manual de usuario

KTI Networks

KTI Networks KCD-400 Series Manual de usuario

KTI Networks

KTI Networks KC-10TF Series Manual de usuario

KTI Networks

KTI Networks NC-300D Series Manual de usuario

KTI Networks

KTI Networks KGC-352 Series Manual de usuario

KTI Networks

KTI Networks KFC-200 Manual de usuario

KTI Networks

KTI Networks KS-220F/T Manual de usuario

KTI Networks

KTI Networks KC-300D Series Manual de usuario

KTI Networks

KTI Networks 100BASE-TX Manual de usuario

KTI Networks

KTI Networks KGC-320 Manual de usuario

KTI Networks

KTI Networks KCD-302 Series Manual de usuario

KTI Networks

KTI Networks KGC-310 Manual de usuario

KTI Networks

KTI Networks KCD-300 Manual de usuario

KTI Networks

KTI Networks Modular Media Converter Center System... Manual de usuario

KTI Networks

KTI Networks KGC-261-DP/G: KGC-261-DP/I Manual de usuario

KTI Networks

KTI Networks KSC-200 Series Manual de usuario

KTI Networks

KTI Networks KGC-300 Series Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario