KROHNE OPTISOUND3020 C Manual de usuario
OPTISOUND3020 C Quick setup guide
Ultrasonic Level Transmitter
Two-wire 4 … 20 mA/HART
2
Contents
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
Contents
1 For your safety ......................................................................................................................... 3
1.1 Authorised personnel ....................................................................................................... 3
1.2 Appropriate use................................................................................................................ 3
1.3 Warning about incorrect use............................................................................................. 3
1.4 General safety instructions............................................................................................... 3
1.5 Safety label on the instrument .......................................................................................... 4
1.6 EU conformity................................................................................................................... 4
1.7 FulllmentofNAMURrecommendations ......................................................................... 4
2 Product description................................................................................................................. 5
2.1 Conguration.................................................................................................................... 5
3 Mounting................................................................................................................................... 6
3.1 Mountinginstructions ....................................................................................................... 6
4 Connecting to power supply................................................................................................... 7
4.1 Connection procedure...................................................................................................... 7
4.2 Wiring plan, single chamber housing................................................................................ 8
4.3 Wiring plan, double chamber housing .............................................................................. 8
5 Set up with the display and adjustment module PLICSCOM .............................................. 9
5.1 Insert display and adjustment module.............................................................................. 9
5.2 Setup steps .................................................................................................................... 10
5.3 Menuschematic............................................................................................................. 12
6 Supplement ............................................................................................................................ 14
6.1 Technical data ................................................................................................................ 14
Information:
This quick setup guide enables quick setup and commissioning of
your instrument.
Youcanndfurtherinformationinthecorresponding,comprehensive
operatinginstructionsaswellasintheSafetyManualforinstruments
withSILqualication.
Operating instructions OPTISOUND 3020 C - Two-wire
4 … 20 mA/HART: Document-ID 30507
Editing status of the quick setup guide: 2019-09-25
3
1 For your safety
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
1 For your safety
1.1 Authorised personnel
All operations described in this documentation must be carried out
onlybytrained,qualiedpersonnelauthorisedbytheplantoperator.
Duringworkonandwiththedevice,therequiredpersonalprotective
equipment must always be worn.
1.2 Appropriate use
OPTISOUND3020Cisasensorforcontinuouslevelmeasurement.
Youcannddetailedinformationabouttheareaofapplicationin
chapter "Product description".
Operational reliability is ensured only if the instrument is properly
usedaccordingtothespecicationsintheoperatinginstructions
manual as well as possible supplementary instructions.
Forsafetyandwarrantyreasons,anyinvasiveworkonthedevice
beyond that described in the operating instructions manual may be
carried out only by personnel authorised by the manufacturer. Arbi-
traryconversionsormodicationsareexplicitlyforbidden.
1.3 Warning about incorrect use
Inappropriateorincorrectuseofthisproductcangiverisetoapplica-
tion-specichazards,e.g.vesseloverllthroughincorrectmounting
oradjustment.Damagetopropertyandpersonsorenvironmental
contaminationcanresult.Also,theprotectivecharacteristicsofthe
instrument can be impaired.
1.4 General safety instructions
Thisisastate-of-the-artinstrumentcomplyingwithallprevailing
regulationsanddirectives.Theinstrumentmustonlybeoperatedina
technicallyawlessandreliablecondition.Theoperatorisresponsi-
ble for the trouble-free operation of the instrument. When measuring
aggressiveorcorrosivemediathatcancauseadangeroussituation
if the instrument malfunctions, the operator has to implement suitable
measures to make sure the instrument is functioning properly.
During the entire duration of use, the user is obliged to determine the
compliance of the necessary occupational safety measures with the
currentvalidrulesandregulationsandalsotakenoteofnewregula-
tions.
The safety instructions in this operating instructions manual, the na-
tionalinstallationstandardsaswellasthevalidsafetyregulationsand
accidentpreventionrulesmustbeobservedbytheuser.
Forsafetyandwarrantyreasons,anyinvasiveworkonthedevice
beyond that described in the operating instructions manual may be
carried out only by personnel authorised by the manufacturer. Arbi-
traryconversionsormodicationsareexplicitlyforbidden.Forsafety
reasons,onlytheaccessoryspeciedbythemanufacturermustbe
used.
4
1 For your safety
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
Toavoidanydanger,thesafetyapprovalmarkingsandsafetytipson
thedevicemustalsobeobservedandtheirmeaningreadinthisoper-
ating instructions manual.
1.5 Safety label on the instrument
Thesafetyapprovalmarkingsandsafetytipsonthedevicemustbe
observed.
1.6 EU conformity
ThedevicefullsthelegalrequirementsoftheapplicableEUdirec-
tives.ByaxingtheCEmarking,weconrmtheconformityofthe
instrumentwiththesedirectives.
The EU conformity declaration can be found on our homepage.
1.7 FulllmentofNAMURrecommendations
NAMURistheautomationtechnologyuserassociationintheprocess
industryinGermany.ThepublishedNAMURrecommendationsare
acceptedasthestandardineldinstrumentation.
ThedevicefullstherequirementsofthefollowingNAMURrecom-
mendations:
• NE 21 – Electromagnetic compatibility of equipment
• NE43–Signallevelforfaultinformationfrommeasuringtransduc-
ers
• NE53–Compatibilityofelddevicesanddisplay/adjustment
components
For further information see www.namur.de.
5
2 Product description
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
2 Product description
2.1 Conguration
Thetypelabelcontainsthemostimportantdataforidenticationand
use of the instrument:
• Instrument type
• Articleandserialnumberdevice
• Article number, documentation
• Technicaldata:Approvals,processtemperature,processtting/
material,signaloutput,voltagesupply,protection
Type label
6
3Mounting
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
3 Mounting
3.1 Mounting instructions
The reference plane for the measuring range is the lower edge of the
transducer.
Makesurethataminimumdistancefromthereferenceplane-the
so-calleddeadzone,inwhichmeasurementisnotpossible-is
maintained.Theexactvalueofthedeadzoneisstatedinchapter
"Technical data".
12
Fig. 1: Minimum distance to the max. level
1 Dead zone
2 Reference plane
Mountthesensoratleast200mm(7.874in)awayfromthevessel
wall.
1
2
> 200 mm
Fig. 2: Mounting on round vessel tops
1 Reference plane
2 Vessel center or symmetry axis
Reference plane for
measuring range
Mounting
7
4 Connecting to power supply
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
4 Connecting to power supply
4.1 Connection procedure
Proceed as follows:
1. Unscrew the housing lid
2. Ifadisplayandadjustmentmoduleisinstalled,removeitbyturn-
ing it to the left
3. Loosencompressionnutofthecableglandandremoveblind
plug
4. Removeapprox.10cm(4in)ofthecablemantle,stripapprox.
1cm(0.4in)ofinsulationfromtheendsoftheindividualwires
5. Insert the cable into the sensor through the cable entry
6. Lifttheopeningleversoftheterminalswithascrewdriver(see
followingillustration)
7. Insert the wire ends into the open terminals according to the wir-
ing plan
Fig. 3: Connection steps 6 and 7
8. Pressdowntheopeningleversoftheterminals,youwillhearthe
terminal spring closing
9. Check the hold of the wires in the terminals by lightly pulling on
them
10. Connect the screen to the internal ground terminal, connect the
externalgroundterminaltopotentialequalisation
11. Tighten the compression nut of the cable entry gland. The seal
ring must completely encircle the cable
12. Screw the housing lid back on
Theelectricalconnectionisnished.
8
4 Connecting to power supply
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
4.2 Wiring plan, single chamber housing
I2C
Display
1
12 5678
Fig. 4: Wiring plan - single chamber housing
1 Voltage supply, signal output
4.3 Wiring plan, double chamber housing
I2C
1
12
Fig. 5: Wiring plan - double chamber housing
1 Voltage supply, signal output
Wiring plan
Wiring plan
9
5SetupwiththedisplayandadjustmentmodulePLICSCOM
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
5 Set up with the display and adjustment
module PLICSCOM
5.1 Insert display and adjustment module
The display and adjustment module can be inserted into the sensor
andremovedagainatanytime.Itisnotnecessarytointerruptthe
voltagesupply.
Proceed as follows:
1. Unscrew the housing lid
2. Place the display and adjustment module in the desired position
ontheelectronics(youcanchooseanyoneoffourdierentposi-
tions-eachdisplacedby90°)
3. Press the display and adjustment module onto the electronics
and turn it to the right until it snaps in
4. Screw housing lid with inspection window tightly back on
Disassemblyiscarriedoutinreverseorder.
The display and adjustment module is powered by the sensor, an ad-
ditional connection is not necessary.
Fig. 6: Insert display and adjustment module
Note:
Ifyouintendtoretrottheinstrumentwithadisplayandadjustment
moduleforcontinuousmeasuredvalueindication,ahigherlidwithan
inspection glass is required.
Mount/dismount display
and adjustment module
10
5SetupwiththedisplayandadjustmentmodulePLICSCOM
OPTISOUND3020 C • Two-wire 4 … 20 mA/HART
62687-EN-190926
5.2 Setup steps
1. Go to the menu "Basic adjustment"viathedisplayandadjust-
ment module.
▶Basicadjustment
Display
Diagnostics
Service
Info
2. Carry out the adjustment in the menu items "Min. adjustment" and
"Max. adjustment".
Max.adjustment
100.00 %
=
1.000 m(d)
2.000m(d)
Min.adjustment
0.00 %
=
5.000 m(d)
4.000m(d)
3. Select in the menu item "Medium" the medium of your applica-
tion,forexample"Aqueous solution".
Medium
Liquid
4. Select in the menu item "Application"thevessel,theapplication
andthevesselform,forexample,"Storage tank".
Vessel form
Storage tank
The sensor measures the distance from the sensor to the product
surface.Forindicationofthereallevel,anallocationofthemeasured
distance to the percentage height must be carried out.
Theactuallevelisthencalculatedonthebasisoftheseentered
values.Atthesametime,theoperatingrangeofthesensorislimited
frommaximumrangetotherequestedrange.
Set parameters
Parameter adjustment
Tabla de contenidos
Otros manuales de Transmisor de KROHNE
KROHNE
KROHNE OPTIWAVE 1400 C Diagrama de cableado
KROHNE
KROHNE OPTIWAVE 1010 Diagrama de cableado
KROHNE
KROHNE OPTISOUND 3020 Quick Manual de usuario
KROHNE
KROHNE OPTITEMP TT 53 R Ex Manual de usuario
KROHNE
KROHNE OPTIWAVE 500 Series Diagrama de cableado
KROHNE
KROHNE OPTISOUND 3020 C Manual de usuario
KROHNE
KROHNE OPTISOUND 3030 C Manual de usuario
KROHNE
KROHNE OPTIWAVE X500 Diagrama de cableado
KROHNE
KROHNE OPTISOUND 3010 C Manual de usuario
KROHNE
KROHNE OPTISOUND 3010 C Manual de usuario
KROHNE
KROHNE OPTIWAVE X400 Diagrama de cableado
KROHNE
KROHNE OPTIBAR 5060 eDP Diagrama de cableado
KROHNE
KROHNE BW25 Manual de usuario
KROHNE
KROHNE OPTIWAVE 6300 C Diagrama de cableado
KROHNE
KROHNE OPTISOUND 3020 Manual de usuario
KROHNE
KROHNE PM 3050 Manual de usuario
KROHNE
KROHNE OPTIWAVE 1010 Manual de usuario
KROHNE
KROHNE POWERFLEX 2200 C Manual de usuario
KROHNE
KROHNE OPTISOUND 3010 C Manual de usuario
KROHNE
KROHNE OPTIBAR DP 7060 Diagrama de cableado
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
