Kraun Wireless Access Point Ceiling 300Mbps Manual de usuario
Manual
www.kraun.it
Warning
The manufacturer is under no circumstances liable for any unauthorised modifications made to
the product by the user or any other parties which may compromise its conformity and safety.
Cod. KR.KZ
User’s Manual
Wireless Access Point
Ceiling 300Mbps
2
Manual
www.kraun.it
TABLE OF CONTENTS
Chapter 1. Product Overview 4
1.1 Product Features 4
1.2 Package Contents 4
Chapter 2. Product Installation 5
2.1 Default Settings 5
Chapter 3. Conguration Guide 6
3.1 Web Login 6
3.2 Setup Wizard 7
Wireless Access Point (AP) Mode 7
Bridge (WDS) Mode 9
3.3 Running Status 11
3.4 LAN Settings 12
Chapter 4. Wireless Settings 13
4.1 Basic Settings 13
4.1.1 Access Point (AP) Mode 13
4.1.1.1 Application and Topology Plan 13
4.1.1.2 Function Explanation 14
4.1.2 Bridge (WDS) Mode 15
4.1.2.1 4.1.2.1 Point to Point Bridge 15
4.1.2.2 P2MP Bridge Mode 16
4.1.2.3 Wireless Repeater Mode 17
4.2 Security Settings 18
4.2.1 AP Security Setting 18
Mixed WEP 18
Setting Explanation 18
WPA- PSK 19
Setting Explanation 19
WPA2-PSK 20
Setting Explanation 20
WPA 21
Setting Explanation 21
WPA2 22
Setting Explanation 22
802.1x Authentication 23
Setting Explanation 23
4.2.2 WDS Security Setting 24
4.3 Advanced Settings 25
Setting Explanation: 25
4.4 Access Control 26
Setting Explanation: 26
4.5 Connection Status 26
Setting Explanation: 26
3
Manual
www.kraun.it
Chapter 5. System Tools 27
5.1 Password Change 27
5.2 Restore to Factory 27
5.3 Backup/Restore 28
5.4 Time Settings 28
Setting Explanation: 28
5.5 Reboot System 29
5.6 Syslog 29
Chapter 6. Appendix II: WDS Application Instances 32
4
Manual
www.kraun.it
Chapter 1. Product Overview
KR.KZ is a wireless Access Point based on the latest IEEE802.11n standard while at the same time being back-
wards compatible with IEEE802.11b/g devices. Adopting the advanced “Multiple in and Multiple out” (MIMO)
technology, it can provide a maximum of 300Mbps stable transmitting rate for wireless users. With appropriate
Power over Ethernet (POE) support, you only need to run one cable to the AP to deliver both data and power.
Ceiling mounted design and POE technology make it couldn’t be easier for family, enterprise, and hotel users to
extend wireless networks indoors. Unique Watchdog technology makes AP working more stably and wireless
network running normally for a long time.
Wireless AP and WDS working modes support wireless AP, wireless Repeater, wireless Point-to-Point (P2P) Bridge,
and wireless Point-to-Multipoint (P2MP) Bridge functions. Firstly, it can be used as a wireless Hot Spot to enable
the accesses of wireless users when in AP mode. Secondly, it can be used as a Bridge to connect two or more
wired networks when it is in P2P or P2MP mode. Thirdly, it can also be used as a wireless Repeater to expand
your wireless network coverage area.
Furthermore, 64/128-bit Wired Equivalent Privacy (WEP), WPA-PSK, WPA2-PSK, WPA&WPA2, 802.1X Authentica-
tion, and MAC Address lter are all supported to protect your data and privacy. Gigabit LAN port provides you
higher LAN transmission rate. SNMP and Web-based management interface make conguration easier than ever.
1.1 Product Features
yComplies with the latest 802.11n and 802.11b/g standards
ySupports AP and WDS working modes
yProvides 300Mbps receiving and transmitting rate
yMIMO technology uses signal reections to increase 8 times transmission distance of 802.11g standard and
eciently reduce “dead spots”
yOne Gigabit Auto-negotiation LAN port supported for LAN connection
yPOE and external power supported
ySNMP and Web-based management interface
y64/128-bit WEP encryption
yWPA-PSK, WPA2-PSK, WPA&WPA2 encryption methods
yAuto MDI/ MDIX
yWireless VLAN divisible for managing clients conveniently
yClient’s access limited
yWatchdog designed to make device run stably
ySupports auto wireless channel selection
ySoftware controls the wireless signal on/ o and remotely controls the wireless coverage area.
1.2 Package Contents
Please unpack the package and nd the following items:
yOne KR.KZ Wireless AP
yOne Power Adapter
yEight Screws
yOne User Guide
yOne Network Cable
yFour plastic covers
If any of listed items are missing or damaged, please contact the Tenda reseller from whom you purchased for
replacement immediately.
5
Manual
www.kraun.it
Chapter 2. Product Installation
You are recommended to install the product after conguring the settings of KR.KZ according to the guide in
chapter 3. The following steps take AP mode for example.
1. Use the included power adapter to power on the AP. You can also use POE power supply or POE switch to
power on the AP.
2. Connect one end of the network cable to the LAN port of KR.KZ, and another end to your Ethernet broadband,
switch or PC.
3. Connect wireless adapter to KR.KZ.
Please refer to the topology below:
2.1 Default Settings
The default mode setting of this device is AP (Access Point):
Item Default Value
Common Default Settings
Username admin
Password admin
IP Address 192.168.0.254
Subnet Mask 255.255.255.0
Wireless
SSID KRAUN_the last 6 characters of MAC
address (example KRAUN_123456)
Wireless Security Enable
Security Type WPA-PSK/WPA2-PSK
Criptazione (Encryption) TKIP+AES
WPA KEY KRAUN_KR.KZ
DHCP Server Disable
6
Manual
www.kraun.it
Chapter 3. Conguration Guide
3.1 Web Login
Connect to KR.KZ via wired cable and congure 192.168.0.x(x ranges 2-254) as your PC’s IP address, and
255.255.255.0 as subnet mask. (Please refer to the Appendix II for details on TCP/IP setting)
Launch Internet Explorer. In the address bar, enter the AP’s default IP address, 192.168.0.254. Press Enter key and
the login screen will appear. Enter admin both in the user name and password eld.
Click OK to enter the welcome page of the device.
You can select “Running Status”, ”LAN Settings”, “Wireless Settings”, “SNMP Settings” and “System Tools” on the
left menu. Click “Next” to enter the wireless working mode setup page. KR.KZ supports two working modes:
wireless AP (AP), Bridge (WDS). Select a working mode to congure the settings. For more details please refer to
the following chapters.
7
Manual
www.kraun.it
3.2 Setup Wizard
Click “Next” in the rst page and the next page appears.
On this page, you can select wireless AP or Bridge to adapt dierent wireless access environment.
Wireless Access Point (AP) Mode
Select “Wireless Access Point (AP)” and then click “Next” to enter the basic settings.
Picture 4
Fill in the following items according to the reminder information.
1. SSID: Set the SSID name of the device.
2. Channel: Select the wireless communication channel. The default is channel 6.
8
Manual
www.kraun.it
After you nish the settings, click “Next” to enter the “Security Settings” page as the picture below:
“Security Settings” is used to encrypt the settings for AP and authorize the wireless client to access the AP for
security in wireless network. Please refer to chapter 4.1.1.2 for detailed security setting specications.
After nishing the settings, click “Next” to nish settings as the picture below.
9
Manual
www.kraun.it
Bridge (WDS) Mode
Select “Setup Wizard” on the left menu and the working mode selection interface will appear as the picture
below.
Select Bridge (WDS) and then click “Next”. You will enter the WDS setup page as the picture below.
Bridge (WDS) working mode includes: Point to Point Bridge (WDS P2P), Point to Multipoint Bridge (WDS P2MP),
Wireless Repeater (Repeater). Users can select the mode according to need. Please refer to Chapter 4.1.2 for
detailed introduction.
Click “Enable Scan”. AP will scan the available wireless device nearby automatically and display them under the
10
Manual
www.kraun.it
list (see the picture below). Select the AP which you need to bridge and click “Next” to enter the security setup
interface. On the other hand, you can input the MAC address of wireless device which you want to bridge manu-
ally and select the corresponding channel.
After nish the settings, click “Next” to enter the “Security Setting” option as the picture below.
“WDS Security Setting” is used to encrypt the AP and authorize the device to establish bridge. Only when the
passwords of the devices in bridge are consistent, the communication can get through normally.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
