Kramer VP-8x8 Manual de usuario

KRAMER ELECTRONICS L TD.

USER MANUAL

MODEL:

VP-8x8

8x8 VGA/UXGA Matrix

Switcher

P/N: 2900-000054 Rev 5

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the VP-8x8 8x8 VGA/UXGA Matrix Switcher 4

4Installing in a Rack 7

4.1 Using the IR Transmitter 8

5Connecting the VP-8x8 8x8 VGA/UXGA Matrix Switcher 9

5.1 Connecting the VP-8x8 Rear Panel 9

5.2 Connecting to the VS-8x8 via RS-232 10

5.3 Controlling via RS-485 11

5.4Control Configuration via the Ethernet Port 12

5.5 Setting the DIP-Switches 12

5.6 Cascading Machines 14

6Operating the VP-8x8 8x8 VGA/UXGA Matrix Switcher 16

6.1 Displaying Unit Characteristics 16

6.2 Confirming Settings 16

6.3 Storing/Recalling Input/Output Configurations 18

6.4 Locking the Front Panel 19

6.5 Updating the VP-8x8 Firmware 20

7Technical Specifications 21

8Default Communication Parameters 22

9Table of Hex Codes for Serial Communication 23

10 Protocol 2000 24

10.1 Syntax 24

10.2 Instruction Codes 25

Figures

Figure 1: VP-8x8 User Manual Front Panel 5

Figure 2: VP-8x8 User Manual Rear Panel 6

Figure 3: VP-8x8 Underside View 6

Figure 4: Connecting the VP-8x8 8x8 VGA / UXGA Matrix Switcher 10

Figure 5: Crossed Cable RS-232 Connection 11

Figure 6: Straight Cable RS-232 Connection with a Null Modem Adapter 11

Figure 7: VP-8x8 DIP-switches 12

Figure 8: Control Configuration via RS-232 and RS-485 15

Figure 9: Storing and Recalling using the Input/Output Buttons 18

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer VP-8x8 8x8 VGA/UXGA Matrix

Switcher, which is ideal for the following typical applications:

Any professional display system requiring a true 8x8 computer graphics

matrix operation

Multimedia and presentation source, and acceptor selection

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VP-8x8 away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the

wall before installing

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 - Overview

3 Overview

The VP-8x8 is a high performance 8x8 RGBHV Matrix Switcher for high-resolution

video. The VP-8x8 lets you simultaneously route any or all of the 8 inputs to any or

all of the 8 outputs.

The VP-8x8 8x8 VGA/UXGA Matrix Switcher features:

400MHz video bandwidth that ensures transparent performance even in the

most critical applications

16 preset memory locations for quick access to common configurations

Delayed switching mode (ranging from 0 to 3.5sec in increments of 0.5 sec)

for clean transitions (seamless switching) when switching between

non-genlocked sources

DC coupled inputs and outputs

A TAKE button that allows you to place multiple switches in a queue and

then activate them simultaneously with one touch of this button

A LOCK button to prevent tampering with the front panel

Automatic detection of connected input signals (respective button

illuminates)

Control the VP-8x8 using the front panel buttons, or remotely via:

RS-485 or RS-232 serial commands transmitted by a touch screen system,

PC, or other serial controller

The Kramer RC-IR3 infrared remote control transmitter

Ethernet

The VP-8x8 is dependable, rugged, and fits into one vertical space (1U) of a

standard 19” professional rack.

3.1 Defining the VP-8x8 8x8 VGA/UXGA Matrix Switcher

This section defines the VP-8x8.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Product - Overview

- Overview

VP-8x8 –Overview

Figure 1: VP-8x8 User Manual Front Panel

Feature

Function

IR Receiver

The yellow LED is illuminated when receiving signals from the infrared remote control transmitter

POWER Switch

Illuminated switch for turning the unit ON or OFF

IN SELECTOR Buttons

Select the input to switch to the output.

When a signal is detected, the input button illuminates in green

OUT SELECTOR Buttons

Select the output to which the input is switched

ALL Button

Pressing ALL followed by an INPUT button, connects that input to all outputs

For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs

OFF Button

Press an OUT SELECTOR button and then an OFF button to disconnect that output from the inputs

Press the ALL button and then the OFF button to disconnect all the outputs

TAKE Button

Pressing TAKE toggles the mode between the Confirm mode and the At Once mode (user

confirmation per action is unnecessary)

When in the Confirm mode, the TAKE button illuminates

STO (Store) Button

Pressing STO followed by an input/output button stores the current setting

For example, press STO and then the Output button # 3 to store in Setup # 3

RCL (Recall) Button

Pressing the RCL button and the corresponding IN/OUT button recalls a setup from the non-volatile

memory. The stored status flashes. Pressing a different IN/OUT button lets you view another setup.

After making your choice, pressing the RCL button again implements the new status

LOCK Button

Disengages the front panel switches

STATUS 7-segment Display

Displays the selected input switched to the output (marked above each input)

Also displays the number of IN and OUT ports, the firmware version number, and the MACHINE #. Refer to Section 6.1

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 - Overview

Figure 2: VP-8x8 User Manual Rear Panel

Feature

Function

15-pin HD INPUT Connectors

Connect to the video sources (from 1 to 8)

15-pin HD OUTPUT Connectors

Connect to the output acceptor (from 1 to 8)

FLASH PROG Button

Push in for “Program” to upgrade to the latest Kramer firmware, or release for Normal (the

factory default)

The FLASH PROG “Reset” button is located on the underside of the unit

RS-232 9-pin D-sub Port

Connects to the PC or the Remote Controller

DELAY and SETUP DIP-switches

DIP-switches for setup of the unit (DELAY dips 1, 2, 3 are for setting the delay time; SETUP

dips 1, 2, 3, 4 are for setting machine #; 8 is for RS-485 Termination)

ETHERNET Connector

Connects to the PC or other Serial Controller through computer networking

REMOTE IR 3.5mm Mini Jack

Connect to an external IR receiver unit for controlling the machine via an IR remote controller

(instead of using the front panel IR receiver)

Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the machine (only if

the internal IR connection cable has been installed)

RS-485 Terminal Block Port

Pin G is for Ground connection; Pins B (-) and A (+) are for RS-485

Power Connector with Fuse

AC connector enabling power supply to the unit

Feature

RESET FOR PROGRAM Button

Figure 3: VP-8x8 Underside View

VP-8x8 –Overview

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

VP-8x8 - Installing in a Rack

4 Installing in a Rack

This section provides instructions for rack mounting the unit.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Otros manuales para VP-8x8

Tabla de contenidos

Otros manuales de Cambiar de Kramer

Kramer

Kramer VP-440X Manual de usuario

Kramer

Kramer Tools VP-211 Manual de usuario

Kramer

Kramer VS-81DVI-R Manual de usuario

Kramer

Kramer DIP-31M Manual de usuario

Kramer

Kramer VS-21DVI Manual de usuario

Kramer

Kramer VS-21HDCP Manual de usuario

Kramer

Kramer SID-X2N Manual de usuario

Kramer

Kramer DIP-31 Manual de usuario

Kramer

Kramer VP-440 Manual de usuario

Kramer

Kramer VS-611DT Manual de usuario

Kramer

Kramer VS-21H-IR Manual de usuario

Kramer

Kramer VS-81H Manual de usuario

Kramer

Kramer VS-24xl Manual de usuario

Kramer

Kramer VS-21DTP Manual de usuario

Kramer

Kramer VS-44DT Manual de usuario

Kramer

Kramer VP-734 Manual de usuario

Kramer

Kramer WP-20CT Manual de usuario

Kramer

Kramer VIA Collage Manual de usuario

Kramer

Kramer VS-421 Manual de usuario

Kramer

Kramer VP-730 Manual de usuario

Kramer

Kramer VS-41HC Manual de usuario

Kramer

Kramer VP-61N Manual de usuario

Kramer

Kramer 6241HDx1 Manual de usuario

Kramer

Kramer VP-730 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario