Kramer Yarden 6-C Manual de usuario
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
Yarden 6-C
Closed-back Ceiling Speakers
P/N: 2900-300347 Rev 2
Yarden 6-C – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
3Overview 3
4Your Yarden 6-C Closed-back Ceiling Speakers 4
5Installing the Yarden 6-C Closed-back Ceiling Speakers 6
5.1 Choosing the Best Location 6
5.2 Cutting the Ceiling Tile 6
5.3 Mounting the Speakers 7
5.4 Setting up an Array Installation 10
5.5 Painting the Speaker 13
6Technical Specifications 14
Figures
Figure 1: Yarden 6-C in a Boardroom Setup 3
Figure 2: Yarden 6-C Closed-back Ceiling Speaker 4
Figure 3: Yarden 6-C Schematic Diagram 5
Figure 4: Mounting the Yarden 6-C 8
Figure 5: Plugging and Securing the Cable 9
Figure 6: Tighten the Mounting Tabs 9
Figure 7: Adjust Tap Selector 10
Figure 8: Square Layout 11
Figure 9: Hexagonal Layout 11
Figure 10: Square Layout Parallel Wiring 12
Yarden 6-C - Introduction
1
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer Yarden 6-C Closed-back Ceiling
Speakers, which are ideal for the following typical applications:
Hotel lobbies and conference rooms
Boardrooms and meeting rooms
Classrooms and lecture venues
Yarden 6-C speakers are designed for indoor dry locations and are
suitable for use in air handling spaces (plenum spaces).
i
2
Yarden 6-C - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerav.com/downloads/Yarden 6-C to check for up-to-
date user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer Speakers away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
Do not open the housing of the speaker; doing so may reduce the
quality of the sound.
UL2043 –Fire Test for Heat and Visible Smoke Release for
Discrete Products and their Accessories Installed in Air-Handling
Spaces.
i
!
i
Yarden 6-C - Overview
3
3
3 Overview
The Yarden 6-C consists of a pair of high performance closed back speakers.
Mount your Yarden 6-C speakers to the ceiling in one of two ways: either directly
onto the ceiling or, for added protection, secure the speakers safely, using our
ceiling mounting kit that is provided free (see Section 5.3).
The Yarden 6-C speakers feature a multi-tap power transformer for selecting8Ω
(bypassing the transformer) or 70V/100V power settings that are suitable for an
array installation. Figure 1shows an example of how the Yarden 6-C can be
installed in a boardroom setup:
Figure 1: Yarden 6-C in a Boardroom Setup
4
Yarden 6-C - Your Yarden 6-C Closed-back Ceiling Speakers
4 Your Yarden 6-C Closed-back Ceiling
Speakers
Figure 2 defines the Yarden 6-C:
Figure 2: Yarden 6-C Closed-back Ceiling Speaker
The following table defines the Yarden 6-C hardware items (per speaker pair) for
each model in the series:
Description
A pair of
ceiling
speakers
(one shown)
Two grilles
(one shown)
Cutout
template
This table defines the ceiling mounting kit items:
Four
support
ring
screws
Two ceiling
support rings
(C-ring) –one
shown
Two pairs of
tile rails –
one of a pair
shown
Yarden 6-C - Your Yarden 6-C Closed-back Ceiling Speakers
5
5
Each Closed-back Ceiling speaker is supported by a C-ring and two tile rails. The tile
rails prevent the speakers from falling if the tile itself comes out or falls apart, as
their ends catch onto the T-grid. When mounting onto the ceiling tiles,use both
supports. When mounting onto a sheetrock ceiling, the C-ring alone is used to
reinforce the ceiling material.
Be sure that the tiles can support the speaker. Smaller sized tiles or
fiberglass-type tiles cannot support the weight of the speakers.
When this is the case, the speakers will need additional support.
Figure 3 shows a schematic diagram of the Yarden 6-C:
Figure 3: Yarden 6-C Schematic Diagram
i
6
Yarden 6-C - Installing the Yarden 6-C Closed-back Ceiling Speakers
5 Installing the Yarden 6-C Closed-back
Ceiling Speakers
This section explains how to install the Yarden 6-C, that is:
Choosing the best place to locate your speakers (see Section 5.1)
Cutting the ceiling tile (see Section 5.2)
Mounting the speakers (see Section 5.3)
Setting up an array installation (see Section 5.4)
Painting the speakers (see Section 5.5)
5.1 Choosing the Best Location
Ideally, locate the speakers above the main listening area. Before doing so, be
sure that:
The desired location is free of obstructions, such as electrical piping, AC
ducts or water lines, and so on
There is enough space behind the mounting surface for the speakers
The rear side of the speaker is not blocked by wall studs or other objects
5.2 Cutting the Ceiling Tile
To cut the ceiling tile, do the following:
1. Remove the circle in the supplied template.
Keep this template for later use as a mask, as you may want to paint the speakers (see
Section 5.5)
2. Mark the opening in the correct location by tracing the hole in the template.
3. Cut out the hole according to the template or with a circular cutter set to the
appropriate cutout size.
Initially, you can cut a smaller area inside the marked hole just to be sure that the
space above the speakers is clear
Yarden 6-C - Installing the Yarden 6-C Closed-back Ceiling Speakers
7
7
4. Routethewiringfromtheamplifiertothespeakers’cutoutholes,takingcare
not to place them next to electrical wires or at least at a distance of about
two feet from an AC line.
Do not nail or staple the speaker wires.
If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles where
you plan to install the speakers. Use the template to trace and then cutout the
speaker hole over an empty box.
The closed-back ceiling speakers are supported by the ceiling mounting kit (two
C-rings and two pairs of tile rails; the tile rails prevent the speakers from falling if
the tile itself comes out or falls apart, as their ends catch onto the T-grid). When
mounting onto the ceiling tiles, use both supports.
Be sure that the tiles can support the speaker. Smaller sized tiles or
fiberglass-type tiles cannot support the weight of the speakers.
When this is the case, the speakers will need additional support.
When mounting onto a sheetrock ceiling, the C-ring alone is used to reinforce the
ceiling material.
5.3 Mounting the Speakers
To mount the Yarden 6-C, do the following:
1. Place the C-ringovertheholecutintheceilingtile(onthe“ceiling”side).
Place it around the hole so that the tabs are located in parallel to the tile
edges.
!
i
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Oradores de Kramer
Kramer
Kramer SPK-W611 Manual de usuario
Kramer
Kramer Yarden 4-O Manual de usuario
Kramer
Kramer Tavor 5-O Manual de usuario
Kramer
Kramer SPK-CC688 Manual de usuario
Kramer
Kramer SPK-W611 Manual de usuario
Kramer
Kramer Galil 6-I Manual de usuario
Kramer
Kramer SPK-W511 Manual de usuario
Kramer
Kramer Yarden IH-1 Manual de usuario
Kramer
Kramer Galil 8-CO Manual de usuario
Kramer
Kramer Yarden 6-ID SPK-I651T-KI Manual de usuario
Kramer
Kramer Tavor 8-T Manual de usuario
Kramer
Kramer Galil 6-AWAll Manual de usuario
Kramer
Kramer Galil 6-O SPK-W611T Manual de usuario
Kramer
Kramer SPK-W511 Manual de usuario
Kramer
Kramer Galil 4-D Manual de usuario
Kramer
Kramer SPK-C612 Manual de usuario
Kramer
Kramer SPK-W411T Manual de usuario
Kramer
Kramer Tavor 6-O Manual de usuario
Kramer
Kramer SPK-CO608 Manual de usuario
Kramer
Kramer SPK-W613 Manual de usuario
