Kramer FC-132ETH Manual de usuario

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

FC-132ETH

33x9 Serial/Data Router

P/N: 2900-300229 Rev 3

FC-132ETH - Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

4Defining the FC-132ETH 33x9 Serial/Data Router 6

5Installing in a Rack 9

6Initial Configuration and Use Overview 10

6.1 Configuring the FC-132ETH 11

6.2 Configuring a Virtual Port on the PC 12

6.3 Configuring an Ethernet Connection on the PC 12

6.4 Switching Ports on the FC-132ETH 12

7Connecting the FC-132ETH 33x9 Serial/Data Router 14

7.1 Connecting to the FC-132ETH 33x9 Serial/Data Router via RS-232 15

7.2 Connecting to the FC-132ETH 33x9 Serial/Data Router via Ethernet 15

8Operating the FC-132ETH Locally 20

8.1 Switching a Data Connection to an Output Port 20

8.2 Locking and Unlocking the Front Panel Buttons 20

9Operating the FC-132ETH Remotely via the Web Pages 21

9.1 Browsing the FC-132ETH Web Pages 21

9.2 Connected Clients Page 23

9.3Routing Map Page 24

9.4 Device Settings Page 24

9.5 Communication Page 26

9.6 Serial Port Settings Page 27

9.7 Security Page 28

9.8 Logs Page 31

9.9 About Us Page 32

10 Configuring and Maintaining the FC-132ETH 33

10.1 Terminating the RS-485 Bus 33

10.2 Selecting the RS-232 or RS-485 Port 33

10.3 Activating and Deactivating DHCP 33

10.4 Resetting to the Factory Default Settings 34

10.5 Upgrading the Firmware 34

11 Technical Specifications 35

11.1 Data Handling Performance 35

11.2 Example Bandwidth Calculation 36

12 Default Communication Parameters 37

13 Protocol 3000 38

13.1 Kramer Protocol 3000 Syntax 38

13.2 Kramer Protocol 3000 Commands 41

13.3 Kramer Protocol 3000 –Detailed Commands 42

13.4 Parameters 55

FC-132ETH - Contents

Figures

Figure 1: FC-132ETH 33x9 Serial/Data Router Front Panel 6

Figure 2: FC-132ETH 33x9 Serial/Data Router Rear Panel 8

Figure 3: Connecting the FC-132ETH for Initial Configuration 10

Figure 4: The Port Window –Selecting a Remote Connection 12

Figure 5: Connecting the FC-132ETH 33x9 Serial/Data Router 14

Figure 6: Local Area Connection Properties Window 16

Figure 7: Internet Protocol Version 4 Properties Window 17

Figure 8: Internet Protocol Version 6 Properties Window 18

Figure 9: Internet Protocol Properties Window 19

Figure 10: General Info Page 22

Figure 11: Connected Clients Page 23

Figure 12: Serial Port Settings Page 24

Figure 13: Device Settings Page 25

Figure 14: Communication Page 26

Figure 15: Serial Port Settings Page 28

Figure 16: Security Page 28

Figure 17: Security Confirmation Popup 29

Figure 18: Authentication Required Popup 29

Figure 19: Security Activated Page 30

Figure 20: Logs Page 31

Figure 21: About Us Page 32

FC-132ETH - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined by

function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer FC-132ETH 33x9 Serial/Data Router,

which is ideal for the following typical applications:

Conference room presentations

Advertising applications

Rental and staging

FC-132ETH - Contents

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often associated

with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your FC-132ETH away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause electrical

shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall

FC-132ETH - Getting Started

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims

to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility.

FC-132ETH - Contents

3 Overview

The FC-132ETH is an advanced serial communication matrix, and a bidirectional

serial to Ethernet control-signals converter.

The unit acts as a gateway between Ethernet and massive numbers of RS-232

controlled devices. Also, it can be used to add a serial data routing layer to our

modular matrices populated with DGKat or other cards with data-embedding

features.

The FC-132ETH has 33 RS−232 ports, one of which can be used for RS-485

communication. Into one or more of these ports serial data can be switched from

any of the eight RS-232 data ports or from a pre-configured, virtual Ethernet

connection. Depending on the routing of the matrix, one-to-one bidirectional

communication or one-to-many unidirectional communication is supported.

The FC-132ETH can be controlled using the front panel buttons, a serial controller,

or by the intuitive, feature-loaded Web pages supported by all major Web browsers

which makes it possible to access the FC-132ETH from mobile devices, PCs and

MACs.

In particular, the FC-132ETH features:

Eight RS-232, bidirectional input Data ports

32 RS-232, bidirectional/unidirectional output ports

Note: A switched link acts bidirectionally only when there is one-to-one routing. When an

input is switched to more than one output, that link operates unidirectionally

One Ethernet control/data port

One RS-232 local control port

One dual-function RS-232/RS-485 port

Selectable static or dynamic IP addressing (DHCP)

Configurable serial data parameters, (for example, baud rate and parity)

An easy to read LCD display

A lock button to prevent unwanted tampering with the buttons on the front

FC-132ETH - Overview

panel

Support for Protocol 3000

A virtual-port software application

Web-page control with password authentication for making changes to settings

An internal clock for accurate logs and time-stamping

The FC-132ETH includes the Virtual Serial Port Manager (Kramer VSPM) for

compatibility with applications based on COM-port communication. The virtual serial

port:

Makes the FC-132ETH compatible with all Windows®based applications that

work using a physical COM port. This includes all versions of K-Router and

other Kramer control applications. It enables you to operate all RS-232 and RS-

485 controllable devices over an Ethernet LAN using their existing PC software

Operates like a physical hardware port, that is, a logical COM that behaves like

a standard hardware port but in reality transparently reroutes the data using the

TCP/IP network to the FC-132ETH interface via a virtual null-modem

connection, which you can emulate over Ethernet or the Internet

Can be created in any quantity on your PC and does not occupy an actual

serial port

You can control the FC-132ETH using the front panel buttons, or remotely via:

RS-232 serial commands transmitted by a PC, touch screen system or other

serial controller

A PC connected to the Ethernet port on the device via a LAN

4 Defining the FC-132ETH 33x9 Serial/Data Router

Figure 1 defines the front panel of the FC-132ETH.

Figure 1: FC-132ETH 33x9 Serial/Data Router Front Panel

Feature

Function

POWER LED

Lights green when the device is powered on

ETHERNET

LEDs

CONNECTED

Lights orange when the Ethernet port is connected to another device (see Section 7.2)

DATA

Flashes green when data are being transferred on the Ethernet link

SERIAL

LEDs

RS-232

Lights green when port number 33 is set to RS-232 mode (see RS-232 RS-485 Button)

RS-485

Lights green when port number 33 is set to RS-485 mode

Tx/Rx

Flashes green when data are being transferred over the RS-232/RS-485 link.

Flashes red when serial data is being received.

Flashes orange when serial data is being transmitted and received

RS-232 Ports LEDs 1~32

Flashes green when serial data is being transmitted.

Flashes red when serial data is being received.

Flashes orange when serial data is being transmitted and received

PORT

Buttons

Press to step up through the output data ports for selection (see Section 8.1)

–

Press to step down through the output data ports for selection

DATA

Buttons

Press to step up through the input data ports for selection (see Section 8.1)

–

Press to step down through the input data ports for selection

FC-132ETH –Defining the FC-132ETH 33x9 Serial/Data Router

Tabla de contenidos

Otros manuales de Enrutador de red de Kramer

Kramer

Kramer VS-8UFX Manual de usuario

Kramer

Kramer FC-21ETH Manual de usuario

Kramer

Kramer RB-6 Manual de usuario

Kramer

Kramer FC-28 Manual de usuario

Kramer

Kramer RC-74DL Manual de usuario

Kramer

Kramer FC-28 Manual de usuario

Kramer

Kramer VIA Capmus2 Manual de usuario

Kramer

Kramer VS-8FDxl Manual de usuario

Kramer

Kramer VS-162AVM Manual de usuario

Kramer

Kramer RC-62 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad