Kramer VM-4HDCPxl Manual de usuario

VM-4HDCPXL Quick Start

P/N:

2900- 301265QS

Rev:

Scan for full manual

VM-4HDCPXL Quick Start Guide

This guide helps you install and use your VM-4HDCPXL for the first time.

Go to www.kramerav.com/downloads/VM-4HDCPXL to download the latest user manual and check if

firmware upgrades are available.

Step 1: Check what’s in the box

VM-4HDCPXL 1:4 DVI (HDCP) Distribution Amplifier

4 Rubber feet

1 Power cord

1 Quick start guide

Step 2: Get to know your VM-4HDCPXL

Feature

Function

POWER LED

The green LED is illuminated when the unit is turned ON

EDID Buttons

READ

1. To show the EDID status, press READ

2. To acquire the EDID, press the EDID SELECT button, then press READ

SELECT

Press to select the EDID mode (One Output, Default or Auto-mix)

OUTPUT STATUS LEDs (from

1 to 4)

LEDs illuminate when an output(s) is connected and active;

LEDs flash to indicate the type of EDID acquired or when a non-HDCP display is

connected while HDCP content is provided to the VM-4HDCPxl

INPUT DVI Connector

Connects to the DVI source

OUTPUT DVI Connectors

Connects to a DVI acceptor (from 1 to 4)

FOR PROGRAMMING 9-pin D-

sub Port

For service use only

Power Connector with Fuse

AC connector enabling power supply to the unit

POWER Switch

Illuminated switch for turning the unit ON or OFF

Step 3: Mount VM-4HDCPXL

To rack mount the machine, attach both rack ears

(by removing the screws from each side of the

machine and replacing those screws through the

rack ears) or place the machine on a table.

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-4HDCPXL.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-4HDCPXL.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VM-4HDCPXL and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Otros manuales para VM-4HDCPxl

Tabla de contenidos

Otros manuales de Amplificador de Kramer

Kramer

Kramer VM-50CA Manual de usuario

Kramer

Kramer 920 Manual de usuario

Kramer

Kramer VM-4HD Manual de usuario

Kramer

Kramer 103YCB Manual de usuario

Kramer

Kramer PT-102AN Manual de usuario

Kramer

Kramer 123Vx1 Manual de usuario

Kramer

Kramer 906 Manual de usuario

Kramer

Kramer VP-300K Manual de usuario

Kramer

Kramer VP-2L Manual de usuario

Kramer

Kramer PA-120Z Manual de usuario

Kramer

Kramer TOOLS VM-2C Manual de usuario

Kramer

Kramer VM-3AN Manual de usuario

Kramer

Kramer VP-108 Manual de usuario

Kramer

Kramer TOOLS VP-200D Manual de usuario

Kramer

Kramer TOOLS 103YC Manual de usuario

Kramer

Kramer DSP-62-AEC Manual de usuario

Kramer

Kramer Cobra DA9 Manual de usuario

Kramer

Kramer Pico TOOLS VM-2HDxl Manual de usuario

Kramer

Kramer VM-2DVI Manual de usuario

Kramer

Kramer 907 Manual de usuario

Kramer

Kramer VP-12NHD Manual de usuario

Kramer

Kramer Tools VP-200Dxl Manual de usuario

Kramer

Kramer PA-120Net Manual de usuario

Kramer

Kramer VM-10HD I Series Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario