Koso Mini 3 Manual de usuario

INsTRUCTION

30 mm

11.5 mm

60 mm

432

wh003ba110-B

●Thanks for purchasing our Ambiant Temperature meter. Before operating this unit, please read the instruction carefully and retain them for

future reference.

1.This lcd meter is work on DC 12 volts applications only.

2.For proper installation, please follow the steps described in instruction. Any damage caused by wrong installation shall be imputed to the users.

4.Do not disassemble or change any parts.

5.Opening the instrument will void any warranty. Maintenance or repair should be excecuted by our professionals only.

3.Don't break or modify the wire terminals. To avoid short circuit, do not pull the wires out of the terminal when installing.

Notice

MARK MEANING:

PRESS THE

BUTTON ONCE PRESS THE

BUTTON 3

SECONDS

CAUTION! Some procedures must be followed to avoid the damages to the vehicle.

WARNING!

Some procedures must be followed to avoid damages to the instrument.

Some procedures must be followed to avoid injuries to the user or others.

Meter X 1 Mid-way connector X 2 Velcro X 1 set

Temp sensor wire set X 1

Temp sensor wire set 2( )Accessory

Mid-way connector (Accessory 3)

Wiring installation instruction

Red / "+"Wire connect to the DC 12v igniton switch

Meter (Accessory 1)

Please contact your local distributor if the items received are not the same as the one listed above.

Function instruction

Display range -30~120 -22~248℃(℉)：●Thermometer

Display unit:0.1℃ (℉ )

Around 22 g

●Meter weight

-20~+60 C

●Eective voltage DC12V

●Effective temperature range

●Meter standard

●Meter size

JIS D 0203 S2

60 X 30 X 11.5 mm

Design and specifications are subject to change without notice.

Black / Ground wire connect to the vehicle body or

the engine (must be a good ground)

Temperature-Yellow/Green

1-1 Accessory

(-4 ~+140F)

4-2

●

MAX Temp. record display, press the button once to switch to MIN temp. Recorded.

Figure: Current MAX temp. recorded is 28.5℃

●

In temp screen, press the button once to switch from temp to temp MAX.

Figure: Current temp. display is 22.3℃

●

MIN Temp. record display, press the button once to switch back to current temp. display.

Figure: Current MIN temp. record is -30.0℃

●Back to main screen.

Display Switch Between MAX & MIN Temp

wh003ba110-B

Trouble shooting

●

　→

The power is not supplied properly to the

meter.

Make sure the wires are connected

correctly. The wires and fuse might be

broken.

The meter doesn't work

when the power is on.

The following situation do not necessarily indicate a malfunction of the meter. Please check the following points before taking it for repair.

TroubleTrouble Check itemCheck item

If the problem still can be solve according to the steps above, please contact your local distributor to get assistance.※

Temp does not appear ●

Check the sensor.

Is the wire or temperature sensor broken?→

4-1

Centigrade / Fahrenheit adjustment

Temperature display unit can be set on or℃ ℉

WARNING! To avoid accident, do not check the instument reading while riding.

●The default temperature unit setting is in Centigrade. Hold the button for 3 seconds to switch the temperature

to Fahrenheit.

●Now the temperature unit is changed to Fahrenheit. To switch back the temperature unit back to the Centigrade, hold

again the button for 3 seconds.

●Now the temperature is retuned to the Centigrade!

Press the button for 3secondss to erase the MAX temp. Recorded.

Hold the button for 3seconds to erase the MIN temp. Recorded.

or appear incorrectly.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario