Korenix JetBox 8210 Manual de usuario
JetBox 8210 User Manual
Hardware
www.korenix.com
00.080.03
2
Overview
|
Korenix
Copyright Notice
Copyright© 2007 Korenix Technology Co., Ltd.
All rights reserved.
Reproduction without permission is prohibited.
Information provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, Korenix assumes no liabilities
resulting from errors or omissions in this document, or from the use of the
information contained herein.
Korenix reserves the right to make changes in the product design without notice
to its users.
Acknowledgments
Korenix is a registered trademark of Korenix Technology Co., Ltd.
All other trademarks or registered marks in the manual belong to their respective
manufacturers.
Korenix
|
Overview
3
Table of Content
Copyright Notice ........................................................................................ 2
Acknowledgments ...................................................................................... 2
Table of Content ........................................................................................................ 3
Chapter 1 Overview ............................................................................................ 5
Chapter 2 Hardware Specification ....................................................................... 5
Chapter 3 Hardware Feature ............................................................................... 6
3-1 Dimensions ........................................................................................ 6
3-2 Front Panel IO Connectors .................................................................. 7
3-2-1 Power ON/OFF Switch................................................................. 7
3-2-2 COM Connectors......................................................................... 8
3-2-3 Power LED Indicator .................................................................... 9
3-2-4 CF LED Indicator .......................................................................... 9
3-2-5 Ethernet Connector .................................................................... 9
3-2-6 Audio Connector ....................................................................... 10
3-2-7 Compact Flash Socket ............................................................... 10
3-3 Rear Panel IO Connectors ................................................................. 11
3-3-1 Digital IO Connector.................................................................. 11
3-3-2 VGA Connector ......................................................................... 11
3-3-3 Ethernet Connector (the same as 3-2-5) ................................... 12
3-3-4 Reset Button ............................................................................. 12
3-3-5 USB1 ~ USB4 Connectors .......................................................... 12
3-3-6 Power Connector ...................................................................... 13
3-4 Memory and Storage ........................................................................ 13
3-4-1 Overview .................................................................................. 13
3-4-2 Boot Memory ........................................................................... 14
3-4-3 Compact Flash Card .................................................................. 14
3-4-4 SDRAM ..................................................................................... 14
3-4-5 Battery Backup SRAM (NVRAM)—Optional ............................... 14
3-4-6 I2C EEPROM.............................................................................. 15
3-4-7 Security EEPROM ...................................................................... 15
3-5 RS232/422/485 Serial Ports ................................................................ 15
3-5-1 Overview .................................................................................. 15
3-5-2 Configuration ............................................................................ 15
4
Overview
|
Korenix
3-6 Digital Input and Output ................................................................... 16
3-6-1 Digital Input .............................................................................. 16
3-6-2 Digital Output ............................................................................17
3-7 Hardware Unique Serial Number .......................................................17
Chapter 4 Appendix .......................................................................................... 18
4-1 Chart Index ....................................................................................... 18
4-2 Customer Service ............................................................................. 19
Korenix
|
Overview
5
Chapter 1 Overview
The advantage of adopting Korenix JetBox series is ready-to-use. Korenix is
devoted to improve the usability of embedded computer in industrial domain.
Besides operating system (Linux/WinCE), Korenix provides device drivers,
protocol stacks, system utilities, supporting services and daemons in one
Compact Flash card to make system integration simple. Further, Korenix
provides application development toolkits for users to build up their own
applications easily.
JetBox 8210 is a high performance, compact and rugged embedded computer.
All-in-one device with small volume, fanless design and a capability to withstand
a wide range of temperatures is suitable for industrial severe environment. It is
equipped with Intel Xscale PXA270 RISC processor and 128MB SDRAM
(256MB optional) and supports Linux and WinCE5.0 to meet requirements of
industrial PC applications. For better expansibility, it carries 4 USB ports, 2
RS-232 ports and 2 RS-232/422/485 ports for versatile peripheral and interfaces
and one Compact Flash slot for system integration. It also supports VGA
(640*480) and audio to give users much flexibility in industrial applications. In
addition, it is equipped with 2 RJ-45 ports and supports daemons and web server
to accommodate to the network communication environment today.
With complete software solution and excellent hardware design, JetBox series is
the best choice of embedded computer.
Chapter 2 Hardware Specification
Model JetBox 8210
CPU Intel Xscale PXA270 32 bits 416 MHz
SDRAM 128MB (default), 256 MB (optional)
Boot Memory 256 KB Flash (Boot loader), up to 1024 KB
Compact Flash Interface 1 slot (OS and Applications)
6
Hardware Feature
|
Korenix
Model JetBox 8210
VGA 640*480*16-bits
Audio AC97 stereo audio output with 2.1 W amp,
mono MIC input
Ethernet 10/100 Base-T * 2
NVRAM Battery backup SRAM 1 MB (optional)
EEPROM (I2C) 128-256 Bytes
USB Host USB v1.1 Host Port * 4
RTC Battery backup external RTC
WDT External Watch Dog Timer
UART 16C550 compatible RS232 * 2, RS232/422/485 *
2
DIO Buffered TTL DI *16, DO * 16
Battery 3V Li-Battery
EEPROM (Security) 128 bytes EEPROM
Unique Number 6 bytes unique serial number
Reset Button 1
Power Switch 1
LED Indicator Power * 1, CF * 1
Dip Switch (In Box) 8-bits Dip-Switch * 4 (Configuration)
USB Slave (In Box) 1
Power Input 9~36V DC
Power Consumption 5W
Dimensions 250(W)*66.5(H)*106.3(D)mm
Operating Temperature -15℃ ~ 70℃, 5 to 95% RH
Net Weight 1.07kg
Chart 1 JetBox 8210 HW spec
Chapter 3 Hardware Feature
3-1 Dimensions
The following figures show the dimensions of JetBox 8210. The following
sections give you detailed information about the function of each I/O
Korenix
|
Hardware Feature
7
connector.
Chart 2 JetBox 8210 appearance
Chart 3 JetBox 8210 ME drawing
3-2 Front Panel IO Connectors
3-2-1 Power ON/OFF Switch
This switch is used to turn the system power on and off.
8
Hardware Feature
|
Korenix
Chart 4 Power switch
3-2-2 COM Connectors
COM 1 and COM2 Connectors
The JetBox 8210 provides 2 D-sub 9-pin connectors for RS-232/422/485
communications. The default setting of COM1~ COM2 is RS-232. Please refer with the
programming guide for changing the settings or use the “SerCon” control applet of
the control panel to change the settings.
COM3 and COM4 Connectors
The JetBox 8210 provides 2 D-sub 9-pin connectors (COM3 and COM4) for RS-232
communication.
Note the settings are stored in the EEPROM, not registry. It’s necessary to configure
each hardware target manually or programmatically. Replacing the CF card with OS
and hive registry data will not affect the mode settings of the COM ports.
Chart 5 COM connector
RS-232 RS-422 RS-485
(2-wire)
RS-485
(4-wire)
1 DCD T X D-(A) DATA-(A) T X D-(A)
2 R X D T X D+(B) DATA+(B) T X D+(B)
3 T X D R X D+(B) R X D+(B)
4 DTR R X D-(A) R X D-(A)
5 GND GND GND GND
Korenix
|
Hardware Feature
9
RS-232 RS-422 RS-485
(2-wire)
RS-485
(4-wire)
6 DSR RTS-(A)
7 RTS RTS+(B)
8 CTS CTS+(B)
9 RI CTS-(A)
Chart 6 COM connector PIN assignment
3-2-3 Power LED Indicator
This LED indicator is used to indicate the power on off status.
3-2-4 CF LED Indicator
This LED indicator is used to indicate the CF card access status.
3-2-5 Ethernet Connector
A standard RJ-45 jack socket with LED indicators shows its Active/Link status (Green
LED) and Speed status (Orange LED).
Chart 7 Ethernet connector
Pin 10/100 BaseT Signal Name
1 TX+
2 TX-
3 RX+
4
10
Hardware Feature
|
Korenix
Pin 10/100 BaseT Signal Name
5
6 RX-
7
8
Chart 8 Ethernet connector PIN assignment
3-2-6 Audio Connector
JetBox 8210 provides an AC97 stereo audio output with a 2.1 W amplifier and a
mono MIC input.
Chart 9 Audio connector
Pin Audio Signal Name
1 OUT_R+
2 OUT_R-
3 OUT_L+
4 OUT_L-
5 MIC_IN
6 GND
Chart 10 Audio connector PIN assignment
3-2-7 Compact Flash Socket
This socket is used by the Compact Flash (CF) card contains OS and the user’s
applications.
Tabla de contenidos
Otros manuales de De oficina de Korenix
