Konica Minolta Color Care IQ-501 Manual de usuario

IQ-501 Quick Guide

KONICA MINOLTA

2/27/2020 5:45 PM／D11

Table of contents

Want to Do/Step Execution

Timing Procedure Page

1a. Dairy Care/Preparation Initial only

(one time)

- Basic settings (step 1-35)

- Setting Summary

p.2

p.12

1b. Dairy Care/Execution Everyday - Auto Run (step 1-6)

p.13

Once a day - Manual Execution (step 7-12) p.15

2. Adjust registration for

new paper/Execution

When Combination

of Paper and tray

is changed

- Loading paper to

/Main Body (step 1-9)

/PF-602m(normal) (step 10-19)

/PF-602m(small) (step 20-25)

/PF-707m(normal) (step 26-34)

/PF-707m(small) (step 35-40)

/LU-202m/202XL/XLm (step 41-49)

p.17

-Auto Measure (step 50-62) p.34

3a. Keep registration and

constant color reproduction

during long printing for the

job with Trim Margin

/Preparation

When paper is

changed

- Confirm paper size (Step 1)

- Conformation of Auto Image Adj.

Settings (Step 2-11)

- Package color auto adj. incl

Color Density Control (Step 12-17)

- Both side adjustment (Step 18-30)

- Setting Summary

p.38

p.46

3b.Keep registration and

constant color reproduction

during long printing for the

job with Trim Margin

/Execution

When you start

printing long job

actually

- Print the job by

/Konica Minolta controller (A)

/EFIcontroller (B)

/CREO controller (C) p.47

4a.Keep registration and

constant color reproduction

during long printing for the

job without Trim Margin

/Preparation

When paper is

changed

- Color Density Control setting

(Step 1-7)

- Periodical Both Side Adjustment

setting (Step 8-9)

- Setting Summary

p.49

p.51

4b.Keep registration and

constant color reproduction

during long printing for the

job with Trim Margin

/Execution

When you start

printing long job

actually

- Print the job by

/Konica Minolta controller (A)

/EFIcontroller (B)

/CREO controller (C)

p.52

NOTICE This manual describes the procedures for C3080 as an example.

2/27/2020 5:45 PM／D11

Load “Max density adjustment” paper

into the tray 1.

(Tray # is an example in this manual)

✔ As for selecting adjustment paper, please consult

with service representative.

In general, coated paper is recommended since

color and density reproduction are stable.

Load “the paper actually used for the job”

into the tray 2.

(Tray # is an example in this manual)

✔ An paper should be

lengthwise (X): 420.0 mm to 487.7 mm,

widthwise (Y): 279.4 mm or more).

1a. Daily Care /Preparation (=Basic settings)

2/27/2020 5:45 PM／D11

Press the “Utility/Counter” key.

Press [Administrator Setting].

If the [Administrator Password] screen

is displayed, enter the administrator

password using 8 to 64 one-byte

characters, then press [OK].

✔ The administrator password must be specified using

8 to 64 one-byte

characters.

The [Administrator Setting Menu] screen

is displayed.

Press [System Setting].

Press [Expert Adjustment].

2/27/2020 5:45 PM／D11

Press [Quality Adjustment].

Press [Custom Screen].

Select [Dot190] for [Screen1]

Press [OK].

Press [Exit].

2/27/2020 5:45 PM／D11

Press [Adjustment] on the [MACHINE]

screen.

Press [Quality Adjustment].

Press [Color Density Control].

Press [Basic Setting].

2/27/2020 5:45 PM／D11

Select each item as follows

- [Use Color Density Control] > [ON]

- [Periodical Adj. Execution] > [ON]

- [Adjustment Execution timing]

> [During Job Runs]

- [Chart Tray Setting] > [OFF]

Press [Next].

Select each item as follows

- [Adjustment Interval] > [ON]

Press [Change] and set [1000 pages].

- [Concurrent Execution of BothSidesAdj.]

> [ON]

Press [OK].

Press [Close].

2/27/2020 5:45 PM／D11

Press [Image Diagnosis]

NOTICE

If [Image Diagnosis] is not displayed even

IQ-501 is equipped, please contact your service

representative.

Press [Basic Setting].

Select each item as follows

[DetailedDiagnosis/Sync.SimpleDiagnosis]

> [ON]

[Detailed Diagnosis Result Auto Reset]

> [ON]

[Output Stored Job after Diagnosis]

> [OFF]

Press [OK].

Press [Close].

2/27/2020 5:45 PM／D11

Press [Package Color Auto Adj.].

Press [Initial Set.].

Select each item as follows

For KM controller

- [Screen of Adjustment Target] > [Screen1]

- [Auto Selection] > [OFF]

- [Gamma Auto. Adj.] > [ON]

- [Dens. BalanceAdj.] > [ON]

- [Max Density Adj.] > [ON]

- [Color Density] > [ON]

- [Exact Color] or [G7 Calibration] > [ON]

- [Exact Color : Number of Output Job] > [1] or

- [G7 Calibration : Number of Output Job] > [1]

For EFI/CREO controller

- [Screen of Adjustment Target] > [Screen1]

- [Auto Selection] > [OFF]

- [Gamma Auto. Adj.] > [ON]

- [Dens. BalanceAdj.] > [ON]

- [Max Density Adj.] > [ON]

- [Color Density] > [ON]

- [ControllerCalib.] > [ON]

Press [Next].

2/27/2020 5:45 PM／D11

[Maximum Density

Adjustment Tray] > [Tray1]

Press [Next].

(“Max density adjustment paper is loaded

into the tray 1 as an example.)

Select each item as follows

- [Adjustment Tray] > [Tray2]

- [Auto Run] > [OFF]

- [Overwrite Tray Set. of Max.DensityAdj.]

> [ON]

Press [OK].

(“The paper actually used for the job is

loaded into the tray 1 as an example.)

Press [Start].

Otros manuales para Color Care IQ-501

Tabla de contenidos

Otros manuales de Impresora de Konica Minolta

Konica Minolta

Konica Minolta BIZHUB PRO 920 Manual de usuario

Konica Minolta

Konica Minolta Magicolor 2350 EN Manual de usuario

Konica Minolta

Konica Minolta PagePro 1200W Manual de usuario

Konica Minolta

Konica Minolta bizhub 4000P Manual de usuario

Konica Minolta

Konica Minolta Magicolor 4750DN Manual de usuario

Konica Minolta

Konica Minolta Magicolor 2450 Guía de inicio rápido

Konica Minolta

Konica Minolta bizhub PRESS C6000 Manual

Konica Minolta

Konica Minolta Magicolor 5550 Manual de usuario

Konica Minolta

Konica Minolta Copier 2223 Manual de usuario

Konica Minolta

Konica Minolta bizhub 40p Manual de usuario

Konica Minolta

Konica Minolta Di1611 Manual de usuario

Konica Minolta

Konica Minolta Bizhub 3320 Manual de usuario

Konica Minolta

Konica Minolta 7820n Manual de usuario

Konica Minolta

Konica Minolta bizhub 169 Manual de usuario

Konica Minolta

Konica Minolta Bizhub 4000i Manual de usuario

Konica Minolta

Konica Minolta AccurioPress C2070 Manual de usuario

Konica Minolta

Konica Minolta Magicolor 2550 Manual de usuario

Konica Minolta

Konica Minolta AccurioPress 6136 Manual de usuario

Konica Minolta

Konica Minolta GP-502 Manual de usuario

Konica Minolta

Konica Minolta Magicolor 5430 DL Manual de usuario

Konica Minolta

Konica Minolta Magicolor 5450 Manual de usuario

Konica Minolta

Konica Minolta bizhub 3300P Manual de usuario

Konica Minolta

Konica Minolta bizhub PRO C65hc Manual de usuario

Konica Minolta

Konica Minolta bizhub C287 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario