Konica Minolta CM-26dG Especificaciones técnicas

Spectrophotometer

CM-26dG

CM-26d

CM-25d

En Basic Operating

Instructions

Please read before using the instrument.

This manual explains the basic procedures for measuring

color and/or gloss with the CM-26dG / 26d / 25d

spectrophotometers.

Note) For setting and operation details, see the instruction

manual of the CM-26dG / 26d / 25d.

Table of Contents

Names of Parts ..................................................... 1

Measurement ....................................................... 5

When color difference is measured ....................... 9

Setting measurement conditions ........................ 16

How to set the measuring instrument ................. 17

Names of Parts

■Instrument

Viewfinder lever

Measurement button

(It is on the left and right)

Measurement

area switch

Sample

surface

aperture

Screw holes for securing

Battery

cover

Viewfinder

(Specimen

confirmation

window) LCD screen

Control panel

Charging lamp

Power switch

(CM-26dG/26d only)

USB connection

terminal

(Mini-B type)

Wrist strap

attachment hole

Viewfinder

■Display (LCD Screen)

P.22, Instruction Manual

Names of Parts

Status bar

Data number and

name

Target reference (sample) /

Affiliated group (target)

Target/Sample

Measurement

date/time

Observer/

Illuminant 1

Measurement

area

UV setting

Observer/

Illuminant 2

Pass/fail

result

Target to be used for association

with the next measurement or

filter (target)

■Operation Keys

［］

(Target/Sample) key

Switches between <Target> screen

and <Sample> screen.

[MENU] key

Displays the

<Settings> screen.

[ESC] key

Returns to the previous

screen without configuring

the settings when pressed

on the <Settings> screen,

and returns to list screen

when pressed on the sample

details screen.

[◀, ▶, ▲, ▼] keys

Switches screen tabs from the

<Results Display> screen,

moves the cursor on the

<Settings> screen, or changes

the selected value.

[Confirmation] key

Sets the item or

setting indicated

by the cursor on

the various setting

screens. This key

also switches to

detail screens for

data selected in the

list displayed on the

screen.

■Calibration

Stage

Cap

Zero calibration hole

White calibration plate

Gloss calibration plate

CM-26dG

Cap

Zero calibration hole

White calibration plate

Target mask holder

CM-26d

Cap

Zero calibration hole

White calibration plate

CM-25d

1Turning the Power ON (P.6)

Language selection

P.103, Instruction Manual

* As necessary (after initialization, etc.)

Measurement cond. setting

P.92, Instruction Manual

Measurement area selection

P.33, Instruction Manual

* When required depending on the

measurement conditions

Note: Make sure the measurement area set on the instrument

is the same as the area of the target mask to be used.

Zero calibration

P.35, Instruction Manual

* Only when required (when changing

the measurement conditions, etc.)

2White calibration (P.6, P.7)

White calibration

Gloss calibration (* CM-26dG only)

3Measurement (P.8)

Measurement

Turning the

Power ON

P.32,

Instruction Manual

White

calibration

P. 37,

Instruction Manual

①

Press and hold the power switch for about 1 second.

∙ When first turning the instrument ON after purchasing,

the language setting screen will be displayed, followed

by the date and time setting screen. Configure the

settings according to P.103 and P.104.

To perform white calibration

Note:

Zero calibration must be performed before white calibration

if there have been significant changes in the measurement

environment, if the instrument has not been used for a long

period of time or if using the MAV target mask (with glass).

①

Select “Calibration (Excluding

Zero Cal.)” and press the

[Confirmation] key.

②Place the instrument on

the calibration stage.

③

Press the measurement button.

∙ White calibration will be performed.

∙ Do not move the instrument until white

calibration is complete.

Place the

instrument

on the

calibration

stage

according to

the marks.

Calibration stage

Measurement

Gloss

calibration

only with the 26dG

P.38,

Instruction Manual

If using the CM-26dG, perform

gloss calibration next.

④Place the instrument

in the gloss calibration

position.

Place the

instrument

on the

calibration

stage

according to

the marks.

Calibration stage

⑤Press the

measurement button.

∙ Gloss calibration will

be performed.

∙ Do not move the

instrument until gloss

calibration is complete.

∙ When gloss calibration is

completed, the screen returns

to the <Sample> screen.

Measurement

P.41,

Instruction Manual

①Check the Sample

screen.

・

If not displayed, switch to the

Sample screen.

②Set the specimen

measuring port on the

sample to measure.

∙ Take care to prevent floating

or tilting from occurring.

③Press the

measurement button.

∙ The results are displayed on

the screen. The sample was

saved as "0001".

Measurement

<Reference

color screen>

<measurement

screen>

Otros manuales para CM-26dG

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Konica Minolta

Konica Minolta

Konica Minolta CR-10 Plus Manual de usuario

Konica Minolta

Konica Minolta CR-14 Manual de usuario

Konica Minolta

Konica Minolta Vivid VI-910 Manual de usuario

Konica Minolta

Konica Minolta CM-700d Manual de usuario

Konica Minolta

Konica Minolta CM-3700A Manual de usuario

Konica Minolta

Konica Minolta CL-70F Manual de usuario

Konica Minolta

Konica Minolta CS-150 Manual de usuario

Konica Minolta

Konica Minolta CM-700d Manual de usuario

Konica Minolta

Konica Minolta CM-2600d Manual de usuario

Konica Minolta

Konica Minolta CM2500C Manual de usuario

Konica Minolta

Konica Minolta CA-210 Manual de usuario

Konica Minolta

Konica Minolta CA-100PLUS Manual de usuario

Konica Minolta

Konica Minolta CL-70F Manual de usuario

Konica Minolta

Konica Minolta SPECTRAMAGIC NX - Manual de usuario

Konica Minolta

Konica Minolta JM-103 Manual de usuario

Konica Minolta

Konica Minolta CECF-9 Manual de usuario

Konica Minolta

Konica Minolta CS-3000HDR Manual de usuario

Konica Minolta

Konica Minolta CS-150 Manual de usuario

Konica Minolta

Konica Minolta CM-512M3 Manual de usuario

Konica Minolta

Konica Minolta T-10A Manual de usuario

Konica Minolta

Konica Minolta CS-2000 Manual de usuario

Konica Minolta

Konica Minolta bizhub C3100i Manual de usuario

Konica Minolta

Konica Minolta CM-23d Manual de usuario

Konica Minolta

Konica Minolta CM-2600d Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario