Kohler 13EOZD Manual de usuario

TT-1479 11/10

INSTALLATION INSTRUCTIONS

Original Issue Date: 2/08

Model: 13/15.5/20/23EOZD and 11/13/17/20EFOZD

Market: Marine

Subject: Seawater Pump Service Kit GM59333

Introduction

Use this service kit to replace the existing seawater pump

(GM35622) with a new seawater pump design which

incorporates a pressed-on pulley. Installation of the

service kit involves replacing the seawater pump and

bracket.

Note: If impeller replacement is necessary, use impeller

kit 229826 for seawater pump service kit

GM59333.

Safety Precautions

Accidental starting.

Can cause severe injury or death.

Disconnect the battery cables before

working on the generator set.

Remove the negative (--) lead first

when disconnecting the battery.

Reconnect the negative (--) lead last

when reconnecting the battery.

WARNING

Disabling the generator set. Accidental starting can

cause severe injury or death. Before working on the

generator set or connected equipment, disable the generator

set as follows: (1) Move the generator set master switch to the

OFF position. (2) Disconnect the power to the battery charger.

(3) Remove the battery cables, negative (--) lead first.

Reconnect the negative (--) lead last when reconnecting the

battery. Follow these precautions to prevent starting of the

generator set by an automatic transfer switch, remote

start/stop switch, or engine start command from a remote

computer.

Hazardous voltage.

Can cause severe injury or death.

Operate the generator set only when

all guards and electrical enclosures

areinplace.

Moving parts.

WARNING

Servicing the generator set when it is operating. Exposed

moving parts can cause severe injury or death. Keep

hands, feet, hair, clothing, and test leads away from the belts

and pulleys when the generator set is running. Replace

guards, screens, and covers before operating the generator

set.

Note: Retorque all crankshaft and rotor hardware after

servicing. Do not loosen the crankshaft hardware

or rotor thrubolt when making adjustments or

servicing the generator set. Rotate the

crankshaft manually in a clockwise direction only.

Turning the crankshaft bolt or rotor thrubolt

counterclockwise can loosen the hardware.

Installation Procedure

1. Remove the generator set from service.

1.1 Place the generator set master switch in the OFF

position.

1.2 Disconnect the power to the battery charger, if

equipped.

1.3 Disconnect the generator set engine starting

battery(ies), negative (−) lead first.

2TT-1479 11/10

2. Remove and replace the seawater pump.

2.1 Remove and save the belt guard.

2.2 Remove and save the seawater pump belt. See

Figure 1.

2.3 Remove and discard the existing seawater pump,

mounting bracket, and seawater pump hardware.

DK-250000-AI

1. Seawater pump (344089)

2. Mounting bracket

3. Seawater pump belt

Engine-End View

Figure 1 Locator Drawing (Typical)

2.4 Mount the seawater pump (GM46936) to the new

bracket (GM53017) using 2 bolts (X-125-31) and

2 nuts (X-6210-7) as shown in Figure 2.

2.5 Mount the new bracket/pump assembly to the

engine using the hardware shown in Figure 2.

2.6 Replace the seawater pump belt. Consult the

operation manual for the belt tensioning

procedure.

2.7 Attach the pipe adapters to the seawater pump

and cut to fit the hose attached to the bottom of the

seawater pump. See Figure 2.

2.8 Replace the belt guard.

3. Restore the generator set to service.

3.1 Check that the generator master switch is in the

OFF position.

3.2 Reconnect the generator set engine starting

battery, negative (−) lead last.

3.3 Reconnect the power to the battery charger, if

equipped.

GM59220-D

1. Bolt (X-125-31 qty. 2) and nut (X-6210-7 qty. 2)

2. Pipe adapter (GM58848) and 90_connector (X-391-31)

3. Seawater pump (GM46936)

4. Pipe adapter (GM58848) and hose connector (X-582-16)

5. Screw (M931-08070-60), washer (M125A-08-80), and nut

(M6923-08-80)

6. Use existing hardware and spacers (X-400-74 qty. 2) behind

bracket as required.

7. Mounting bracket (GM53017)

8. Screw (M931-08100-60), washer (M125A-08-80) and spacer

(X-400-74). Locate spacer between bracket and gear cover.

Engine-End View

(Shown with belt guard removed.)

Side View

Figure 2 Seawater Pump Installation

Parts List

Seawater Pump Kit GM59333

Qty. Description Part Number

1 Pump, seawater GM46936

2Bolt (5/16-18 x 0.875 in.) X-125-31

2 Nut, flanged (5/16-18 in.) X-6210-7

1 Bracket, mounting GM53017

2 Adapter, pipe GM58848

2Washer, plain (8.4 mm ID x 16 mm OD) M125A-08-80

1Nut, hex (8 mm) M6923-08-80

1Screw, hex cap (M8 x 70 mm) M931-08070-60

1 Screw, hex cap (M8 x 100 mm) M931-08100-60

1Connector, 90_X-391-31

3 Spacer (0.344 ID x 0.625 OD x 0.25 in.) X-400-74

1 Connector, hose X-582-16

Otros manuales para 13EOZD

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Producto de plomería de Kohler

Kohler

Kohler K-6350 Instrucciones de montaje

Kohler

Kohler ENGLEFIED K-11702X Instrucciones de montaje

Kohler

Kohler ALEUTIAN 31241T-8A Manual de usuario

Kohler

Kohler COMPONENTS K-EX27462T-NW-CP Manual de usuario

Kohler

Kohler 8524T Manual de usuario

Kohler

Kohler ARTIFACTS 72798T Manual de usuario

Kohler

Kohler K-3018 Instrucciones de montaje

Kohler

Kohler K-690 Manual de usuario

Kohler

Kohler K-6330 Manual de usuario

Kohler

Kohler 27406-2MB Manual de usuario

Kohler

Kohler ALEO 97826T-4 Manual de usuario

Kohler

Kohler K-702200 Instrucciones de montaje

Kohler

Kohler BRIVE+ K-8703IN-1WH Manual de usuario

Kohler

Kohler Castia K-TS35917-4Y-2MB Manual de usuario

Kohler

Kohler Fairfax K-12265 Instrucciones de montaje

Kohler

Kohler STRAYT 37341-4 Manual de usuario

Kohler

Kohler K-10540 Instrucciones de montaje

Kohler

Kohler 72419IN Manual de usuario

Kohler

Kohler K-6654 Manual de usuario

Kohler

Kohler RiverBath Quadrangle K-1365-H2 Manual de usuario

Kohler

Kohler K-12286 Instrucciones de montaje

Kohler

Kohler SIMPLICE 596T-4 Manual de usuario

Kohler

Kohler K-7331 Instrucciones de montaje

Kohler

Kohler K-1896 Instrucciones de montaje

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Viega

Viega Prevista Dry 8522.33 Manual de usuario

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manual

baliv

baliv WT-140 Manual de usuario

BELLOSTA

BELLOSTA romina 0308/CC Manual de usuario

Bristan

Bristan PS2 BAS C D2 Diagrama de cableado

Crosswater

Crosswater Heir 18-31 Manual de usuario