Kodak Digital Science 9520 Manual de usuario

User’s

Guide

A-61139

Part No. 1E8148

Document Scanner 9520

Congratulations!

You have purchased one of the most productive document scanners on

the market today. Your Kodak Digital Science Document Scanner 9520

has a host of timesaving and productivity enhancing features that not

only help you get the job done faster, but in more comfort. You should

take proper care of your new scanner as described in this manual. This

will ensure you of many hours of trouble-free operation.

Your new document scanner includes a number of features (these vary

depending on the configuration you purchased; optional features

include:

•Bar Code Reader

•Document Printer (front and/or rear)

•Patch Reader

•Footswitch

•Workstation

•Endorser

Please contact Kodak or your scanner vendor for more information

about how these options might fit into your operation. If these

accessories are installed, become familiar with their operation as they

will add significant value to your scanning environment.

Safety Information for Installation Instructions for the Kodak Digital

ScienceDocument Scanner 9520

IMPORTANT: Equipment shall be installed by qualified

personnel.

WARNING: Dangerous voltage. Disconnect the main

power before installation.

CAUTION: Hot surface, avoid contact

ATTENTION: Eviter le contact, pieces brulantes

VORSICHT: Heisse Oberfläche, Berührung vermeiden

ATTENZIONE: Superficie molto calda, evitare il contatto

ATENd®O: Superftcie quente. Evite contato

PRECAUCIÎN: Superficie caliente. No Tocar

LET OP: Heet oppervlak, contact vermijden

For the Kodak Digital Science Automatic Document Feeder

CAUTION: Moving parts, avoid contact

ATTENTION: Eviter le contact, pieces en mouvement

VORSICHT: Bewegliche Teile, berührung vermeiden

ATTENZIONE: Parti in movimento, evitare il contatto

ATENd®O: Partes em movimento. Evite contato

PRECAUCIÎN: Piezas móviles. No Tocar

LET OP: Bewegende delen, contact vermijden

Acoustic Emission

Maschinenlärminformationsverordnung –3, GSGV

Der arbeitsplatzbezogene Emissionswert beträgt <70 dB(A).

[ Machine Noise Information Ordinance –3, GSGV

–The operator-position noise emission value is <70 dB(A) ].

This equipment was designed for connection to IT Power Systems.

A-61139 March 2000 1-1

1 Introduction

The Kodak Digital Science Document Scanner 9520 is a high-speed,

medium- to high-resolution rotary production scanner designed for high-

volume digital capture of business documents. The Document Scanner

9520 captures printed characters, handwritten text, and graphics from

documents of various sizes and thicknesses in an electronic format for

indexing and database storage.

NOTE: Illustrations in this User’s Guide are shown using the semi-

automatic document feeder.

Scanner features The Document Scanner 9520 has the following features:

•Scans up to 160 pages per minute (standard sized documents fed

in landscape orientation; continuous transport using the semi-

automatic feeder).

•Scans 160 landscape (A4 size) or 120 portrait (8 ½x 11-inch)

documents per minute at 200 dpi or 107 landscape (A4 size) or 80

portrait (8 ½x 11-inch) documents per minute at 300 dpi.

•Handles documents of up to 2.5 to 30 in. (64 to 508 mm) long,

2.5 to 12 in. (64 to 305 mm) wide, and 0.014 in. (0.36 mm) thick.

When using the semi-automatic feeder, the gap release feature

allows thicker documents to be scanned.

•Easy-to-reach control panel keys, identified by graphic symbols.

•A high-speed document transport system with easy access for

cleaning and removal of paper jams.

•Skew detection and correction, auto-cropping and border reduction.

•A multi-feed detection device

•A two-line, 80-character display for status information and operator

messages.

•Full programmability of 18 application modes, with override

capability.

•Linked modes allow the image address to be carried over from one

mode to another.

1-2 A-61139 March 2000

•Programmable keys to perform commonly-used functions.

•A transport-on function that allows 27 of the function codes to be

executed while the transport is running.

•Audible tones for selected functions, such as footswitch, patch

reading, etc.

•English or other language message display.

•A large, built-in workshelf.

•An adaptable, modular design for easy addition of accessories.

•A Patch Reader for automatic document level control

•End-fed patch capability

•A Bar Code Reader for decoding encoded information

Scanner options The following options are available for use with your scanner:

•A choice of feeders (e.g., an optional check feeder, semi-automatic

document feeder or automatic document feeder)

•A choice of exit hoppers (e.g., an optional check stacker)

•A choice of printers the Document Printer 1 or the Super 12

Document Printer. A 600 dpi, 12-character ink-jet printer which

supports black and magenta ink colors

•A Footswitch for document level control

•An Endorser for stamping information on documents

•A workstation console, left or right position (if two consoles are

purchased, there may be one on both sides).

A-61139 March 2000 1-3

Scanner components The following illustrations and descriptions will help you locate and

become familiar with scanner components.

Control panel —contains the status display, indicators, and operating

keys used to control the scanner.

Feed and separator rollers (semi-automatic feeder only) —provides

smooth document feeding of various sizes and textures.

Feed tray —holds documents prior to feeding.

Top cover —provides access behind the transport area.

Exit hopper —collects documents after they have been scanned.

Right-side access door —provides access to the transport system

components.

Side panel switch —allows you to turn the transport system on and

off.

Gap release lever —allows you to open the feed gap to allow thicker

documents to be fed into the transport.

Gap adjustment knob (semi-automatic feeder only) —allows you to

manually adjust the space between the feed and separator rollers for

documents of varying thicknesses.

Top cover

Exit hopper

Right-side access door

Side panel switch

Gap release lever

Gap adjustment knob

(semi-automatic feeder only)

Feed tray

Feed and

separator

rollers

Control panel

1-4 A-61139 March 2000

Rear view

J30 J31 J45

J32

J33 J46

OFF

Not Used

Computer

interface 1

(COIN 1)

Computer

interface 2

(COIN 2)

Computer

interface 3

(COIN 3)

SCSI ports

Power

cord Main power switch

Computer interface 1 (COIN1) —service/diagnostic interface.

Configures the scanner and runs diagnostics.

Computer interface 2 (COIN2) —bar code interface. Transfers

commands between the scanner and external devices/subsystems.

Computer interface 3 (COIN3) —SCSI diagnostic port interface.

System debugging and monitoring SCSI-host computer

communications.

SCSI ports —SCSI connection for the scanner.

Power cord —plugs into an appropriate power outlet.

Main power switch —turns main power to the scanner on and off.

A-61139 March 2000 1-5

Status display —indicates the image address, scan mode, document

level and operator messages.

Two-line status display

Image address Mode name/number Scan mode

indicator

Document level

indicator

Operator message

1-6 A-61139 March 2000

Operating keys and indicators

Plus key

Down arrow

Left arrow

Scanner

buffer

indicators

Up arrow Right arrow

Key/Indicator Function

Scanner buffer indicators Indicates the amount of image buffer space available.

A full image buffer is represented by a single light in the display;

an empty image buffer is represented by all lights in the display.

•The upper indicator represents the image buffer for front side

images.

•The lower indicator represents the image buffer for rear side

images.

Left arrow (←)The Left arrow allows you to:

•Decrement values at a slower rate.

•Backspace, delete the last keystroke, or clear messages in

the status display.

•Enter an alphanumeric character in the image address.

Down arrow (↓)The Down arrow allows you to:

•Decrement values at a faster rate.

•Decrease a data value when used with certain functions.

•Enter an alpha character in the image address fixed field.

Plus key (+) Inputs a value for the image address. When pressed, it allows a

field to remain unchanged.

Right arrow (→)The Right arrow allows you to:

•Increment values at a slower rate.

•Display additional messages in the status display. A blinking

cursor over the arrow in the display indicates there are

additional messages. Press the Right arrow key to display

these messages.

•Enter an alphanumeric character in the image address.

Up arrow (↑)The Up arrow allows you to:

•Increment values at a faster rate.

•Increase a data value when used with certain functions.

•Enter an alpha character in the image address fixed field.

Tabla de contenidos

Otros manuales de Escáner de Kodak

Kodak

Kodak Ngenuity 9000 Series Manual de usuario

Kodak

Kodak Scan Station 700 Manual de servicio

Kodak

Kodak Scan Station 700 Manual de servicio

Kodak

Kodak i730 Manual de usuario

Kodak

Kodak SCAN STATION 100 Manual de funcionamiento

Kodak

Kodak S1220 - Photo Scanning System Manual de usuario

Kodak

Kodak PS810 Manual de usuario

Kodak

Kodak I250 - Document Scanner Manual de usuario

Kodak

Kodak i1220 Plus Manual de usuario

Kodak

Kodak 8456923 Manual de usuario

Kodak

Kodak i1405 Guía de inicio rápido

Kodak

Kodak I6060 - Check Scanner Manual de usuario

Kodak

Kodak i3000 Series Manual de usuario

Kodak

Kodak Ngenuity 9000 Series Instrucciones de funcionamiento

Kodak

Kodak truper 3600 Especificaciones

Kodak

Kodak i3200 Manual de usuario

Kodak

Kodak i1300 Plus Series Manual de usuario

Kodak

Kodak i80 Manual de usuario

Kodak

Kodak RFS 2035 FILM SCANNER Manual de usuario

Kodak

Kodak 3520D - Digital Science Manual

Kodak

Kodak PS400 Series Manual de usuario

Kodak

Kodak I1310 - Document Scanner Manual de usuario

Kodak

Kodak i5000 Series Guía

Kodak

Kodak S2000 Series Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario

Innova

Innova 5210 Manual de usuario

Visioneer

Visioneer CardReader 100 Guía de inicio rápido