KOBE INX28 SQ-700-2 Series Guía de solución de problemas

KOBE Range Hoods

Brillia Series

INX28 SQ-700-2 Series

Model No.: INX2830SQB-700-2 (30”)

INX2830SQH-700-2 (30”)

INSTALLATION INSTRUCTIONS

AND OPERATION MANUAL

IMPORTANT

READ THIS FIRST

READ BEFORE INSTALLATION

1. Carefully check all contents of packages.

2. Thoroughly inspect the unit for any shipping damages, cosmetic

damages or defects.

3. Have a certified contractor/ electrician test the unit before installation.

IF THERE IS ANY PROBLEM:

1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL

PACKAGING MATERIAL.

2. Have your original invoice as proof of purchase and product serial

number ready.

3. Contact your merchant for product replacement due to shipping

damages, cosmetic damages or defects.

4. For all other issues, email customer.service@koberangehoods.com.

NO RETURN, NO REFUND, NO EXCHANGE IF:

1.PRODUCT HAS BEEN INSTALLED

2.KNOCK-OUT HOLES HAVE BEEN

PUNCTURED

3.MISSING ORIGINAL PACKAGING

MATERIAL AND/OR PARTS

 
 
 
[ENGLISH] 
 
- READ AND SAVE THESE INSTRUCTIONS - 
 
 
 
CONTENETS 
IMPORTANT SAFETY INSTRUCTIONS ........................................................................1 
COMPONENTS OF PACKAGE ......................................................................................3 
INSTALLATION...............................................................................................................5 
OPERATING INSTRUCTIONS .......................................................................................8 
MAINTENANCE..............................................................................................................9 
SPECIFICATIONS ........................................................................................................10
MEASUREMENTS & DIAGRAMS.................................................................................11 
PART LIST....................................................................................................................12
CIRCUIT DIAGRAM......................................................................................................14
TROUBLE SHOOTING.................................................................................................15
WARRANTY..................................................................................................................16
WARRANTY INFORMATION FORM............................................................................18
 
 
 - READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING - 
 
ALL WIRE MUST BE DONY BY A PROFESSIONAL AND 
IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES 
 
 

IMPORTANT SAFETY INSTRUCTIONS

- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY,

OBSERVE THE FOLLOWING:

1. Installation and electrical wiring be done by qualified professionals and in accordance with all

applicable codes and standards, including fire-rated construction.

2. When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other

hidden utilities.

3. Ducted fans must be vented to the outside.

a. Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT

SERVICE PANEL.

b. Clean all grease-laden surfaces frequently. To reduce the risk of fire and to disperse

properly, make sure to vent air outside. DO NOT vent exhaust air into wall spacers, attics,

crawl spaces or garages.

NOTE

The warranty is invalid without an authorized agent’s receipt or if unit is

damaged due to misuse, poor installation, improper use, mistreatment,

negligence or any other circumstances beyond the control of KOBE

RANGE HOODS authorized agents. Any repair carried out without the

supervision of KOBE RANGE HOODSauthorized agents will automatically

void the warranty.

KOBE RANGE HOODS will not be held responsible for any damages to

personal property or real estate or any bodily injuries whether caused

directly or indirectly by the range hood.

WARNING: TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE

TOP GREASE FIRE:

1. Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean. Grease

should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil container.

2. Always turn hood ON when cooking.

3. Use high settings on cooking range ONLY when necessary.

4. Do not leave cooking range unattended when cooking.

5. Always use cookware and utensils appropriate for the type and amount of food prepared.

6. Use this unit only in the manner intended by the manufacturer.

7. Before servicing, switch power off at service panel and lock service panel (if possible) to prevent

power from switching on accidentally.

8. Clean ventilating fan frequently.

What to Do in the Event of a Range Top Grease Fire

1. SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner.

KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do

not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911.

2. NEVER PICK UP A BURNER PAN –You May Get Burned.

3. DO NOT USE WATER, including wet dishcloths or towels –a violent steam blast will result.

4. Use an extinguisher ONLY if:

a. You have a Class A, B, C extinguisher and know how to operate it.

b. The fire is small and contained in the area where it started.

c. The fire department has been called.

d. You can fight the fire with your back to an exit.

What to Do if You Smell Gas

1. Extinguish any open flame.

2. Do not try to turn on the lights or any type of appliances.

3. Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and

Fire Department right away.

CAUTION

1. For general ventilation use only. Do not use to exhaust hazardous or explosive materials and

vapors.

2. To reduce the risk of fire, use only metal ductwork. Sufficient air is needed for proper combustion

and exhausting of gases through the flue (chimney) to prevent back drafting.

3. Follow the heating equipment manufacturer’s guideline and safety standards such as those

published by the National Fire Protection Association (NFPA), and the American Society for

Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.

4. Turning any switch on may cause ignition or an explosion.

5. Due to the size and weight of this hood, two people installation is recommended.

ELECTRICAL SHOCK HAZARD –Can result in serious injury or

death. Disconnect appliance from electric power before servicing.

If equipped, the fluorescent light bulb contains small amounts of

mercury, which must be recycled or disposed of according to

Local, State, and Federal Codes.

COMPONENTS OF PACKAGE

(Must keep all materials for returns or refunds)

MODEL NO.: INX2830SQB-700-2 (30”)

Range Hood Box

{A} KOBE range hood

{B} Warranty Registration Card

{C} Quick Reference Guide

{D} Baffle Filter –2pcs for 30”

{E} Aluminum Filter –2pcs for 30”

{F} Screws

{G} Flapper –2pcs

{H} 6” Round Exhaust with Rubber Plate

{A}

{B} {C}

{D} {E}

{F} {G}

{H}

•For more information, please visit our website www.koberangehoods.com

Baffle Filter

*Installed by default

Aluminum Mesh Filter

*Extra filters

Size: 4 x 35 mm

QTY: 8

Size: 4*16

QTY: 6

(Must keep all materials for returns or refunds)

MODEL NO.: INX2830SQH-700-2 (30”)

Range Hood Box

{A} KOBE range hood

{B} Warranty Registration Card

{C} Quick Reference Guide

{D} Honeycomb Filter –2pcs for 30”

{E} Aluminum Filter –2pcs for 30”

{F} Screws

{G} Flapper –2pcs

{H} 6” Round Exhaust with Rubber Plate

{A}

{B} {C}

{D} {E}

{F} {G}

{H}

•For more information, please visit our website www.koberangehoods.com

Honeycomb Filter

*Installed by default

Aluminum Mesh Filter

*Extra filters

Size: 4 x 35 mm

QTY: 8

*Pre-installed

Size: 4*16

QTY: 6

INSTALLATION

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING

Calculation before installation

To calculate installation, please refer to TABLE 1. (All calculation in inches).

- FOR BUILT-IN / INSERT -

TABLE 1

A = Height of Floor to Ceiling

B = Height of Floor to Counter Top

(Standard: 36”)

C = Height of Counter Top to Wood Frame

Bottom (Recommended 26” to 30”)

D = Height of Wood Frame

SAFETY WARNING

•HOOD MAY HAVE SHARP EDGES, PLEASE WEAR PROTECTIVE GLOVES IF

REMOVING ANY PARTS FOR INSTALLING, CLEANING, OR SERVICING.

•BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE

HOOD MAY OCCUR. USING HAND TOOLS IS RECOMMENDED. DO NOT TIGHTEN

SCREWS.

•MAKE SURE TO PREVENT ANY DEBRIS FROM ENTERING THE VENT OPENING TO

AVOID DAMAGE OR MALFUCTION.

INSERT INSTALLATION

Before Installation

1. Read any provided document(s).

2. Test the range hood by temporarily connecting it to an outlet and turning ON the fan and

lights.

3. If you run into any problems, contact KOBE Range Hoods.

Venting Requirements

4. The range hood has top 6” round exhaust (default).

5. Decided the location of the venting pipe from the hood to the outside. A straight, short

vent run will allow the hood to perform more efficiently. Try to avoid elbows, transitions,

and long run as much as possible as this may reduce the performance of the hood. Make

sure that the duct work leads to the outside.

6. It is recommended to use metal / aluminum duct/pipe with a uniform size (ex. 6” round

pipe from range hood to the outside).

7. If an elbow is necessary, a minimum of 12” straight run is necessary before the elbow.

Clearance

8. Clearance is the distance between the cooktop and the bottom of the range hood. The

recommended minimum clearance for this model is 26” and the maximum clearance is

30”.

9. It is important to install the hood at the recommended clearance. Installing too low could

result in damage and/or fire hazard while installing too high may result in reduced

performance and efficiently.

Hood Installation

10.The hood has to be installed inside the cabinet. It is

recommended to install a front and rear stud support.

Refer to Figure 1. The stud supports are located 1-

1/2” from the rear and 2” from the front.

11.Determine and mark the centerlines on the base of

the hood frame where the insert will be installed.

12.Determine and make all necessary cuts in the wall or

ceiling of the ductwork. Note: Install the duct work

before installing the hood.

13.Cut out the opening where the hood will be installed.

Refer to Figure 2.

14.Slide the hood to the opening.

15.Locate the screw holes (2) on each side of the hood.

Adjust the level of the hood casing support according

to the thickness of the base.

16.Secure the hood using the screw holes that are

located at the front and back of the unit (screw

provided). Refer to Figure 3.

17.Make sure the hood casing support is secure before

releasing.

Ductwork

18.Attached the rubber plate and 6” round exhaust vent

adapter to the exhaust opening and use 6 4*16 screws

to secure it. Refer to Figure 4.

19.Connect the pipe to the vent adapter and seal the joint

with duct pipe. Make sure it is completely tight.

Figure 1

Figure 2

*Note: Sample image only. May not be actual model.

Figure 3

Electrical Wire

20.Connect the range hood to an outlet.

21.If hardwired is desired, cut off the plug and connect

three wires (black, white, green) to the outlet wires

and cap with wire connectors. Connect the wires

according to color (ex. black to black).

Finish

22.Remove any protective film from the hood, if any.

23.Before using, make sure that any accessories such

as baffle filters are properly installed when applicable.

24.Test the range hood to see if it is working properly.

THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE

BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL

AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER

OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM

BEING SWITCHED ON ACCIDENTALLY.

Figure 4

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Campana de ventilación de KOBE

KOBE

KOBE CX1830GS-8 Guía de solución de problemas

KOBE

KOBE IN2630SQB-650-5A Guía de solución de problemas

KOBE

KOBE CHX7930SQB-1 Manual de usuario

KOBE

KOBE OVS-CHX2030SQB-40 Guía de solución de problemas

KOBE

KOBE RA3830SQB-WM-1 Guía de solución de problemas

KOBE

KOBE Brillia CHX2730SQF Manual de usuario

KOBE

KOBE Brillia INX27 SQB-700-2 Series Guía de solución de problemas

KOBE

KOBE CH2230SQ Guía de solución de problemas

KOBE

KOBE RA0230SQB Guía de solución de problemas

KOBE

KOBE IN-027 Series Guía de solución de problemas

KOBE

KOBE RA0230SQB-DC-5 Guía de solución de problemas

KOBE

KOBE IN26 30SQB-650-5 Series Guía de solución de problemas

KOBE

KOBE IS2436GSF-1 Guía de solución de problemas

KOBE

KOBE Brillia Series Guía de solución de problemas

KOBE

KOBE CHX30 Series Guía de solución de problemas

KOBE

KOBE RA3830SQ Guía de solución de problemas

KOBE

KOBE CH2230SQ Guía de solución de problemas

KOBE

KOBE CH0030SQB Guía de solución de problemas

KOBE

KOBE BRILLIA INX-026 Guía de solución de problemas

KOBE

KOBE CHX9130SB Guía de solución de problemas

KOBE

KOBE INX2830SQB-700-1 Guía de solución de problemas

KOBE

KOBE CX-183 Guía de solución de problemas

KOBE

KOBE CH7730SQB Guía de solución de problemas

KOBE

KOBE CXX8130QF-GBK-1 Manual de usuario

Manuales populares de Campana de ventilación de otras marcas

emmeti

emmeti RECUPA MED A-140 Guía

Nibe

Nibe F135 Manual de usuario

Kuppersberg

Kuppersberg INTRO 60 Instrucciones de instalación y mantenimiento

Zephyr

Zephyr Spruce AK9834BS Guía de instalación

Hisense

Hisense MH6INBG Manual de usuario

Miele

Miele DA 1255 Manual de usuario

Broan

Broan 46000 Manual de usuario

GE Profile PV977 Instrucciones originales

FALMEC

FALMEC FFRIA24W5FS Manual de usuario

Whirlpool

Whirlpool RH2600XL-1 SERIES Manual de usuario

Küppersbusch

Küppersbusch DX ISLA Manual de usuario

ETNA

ETNA AV360RVS Manual de usuario

JUNO

JUNO JDF603E6 Manual de usuario

Miele

Miele DA 6708 D Manual de usuario

Tricity Bendix

Tricity Bendix LE 150 Manual

AEG

AEG X68163BV1 Manual de usuario

AEG

AEG 125 D Manual de usuario

Smeg

Smeg KSEV97X Manual de usuario